Dale #:
ALLE-AHDLIVECDM32Availability:
Not in Stock - Reserve YoursThis item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.
Description
The MixRack is the heart of any dLive system. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It is typically connected to a dLive Surface, but can also be controlled at the same time as or even without a Surface using a laptop or iPad, Allen & ... Read MoreSuggested Accessories
Description
The MixRack is the heart of any dLive system. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It is typically connected to a dLive Surface, but can also be controlled at the same time as or even without a Surface using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.
There are different sizes of dLive MixRack available. All feature the same mix engine and can work with the full 128 channels by adding DX expanders or digital sources.
Features:
XCVI CORE
The power of dLive emanates from the XCVI Core – pioneered by the Allen & Heath R&D team using next generation FPGA technology, with 36 parallel virtual processing cores generating enough power for 160×64 channels of processing at 96kHz sampling rate. Six parallel mixing engines within the Core calculate over 10,000 cross points per sample, while the FPGA router has capacity for 3,000 x 3,000 audio paths. The massive power of XCVI (25 billion operations per second) allows dLive to deliver 128 full processing inputs and 16 stereo FX returns, a configurable 64 bus architecture, variable bit depth for ultimate precision and noise performance, a virtually infinite mix headroom thanks to a 96bit accumulator, and class leading latency at an ultra-low 0.7ms.
DEEP PROCESSING
Our DEEP processing architecture embeds class-leading compressors and processing emulations directly within dLive’s input and mix channels. An array of bespoke algorithms including graphic EQs, preamp and compressor models can be inserted on the fly without burning FX slots and without the setup, latency and licence hassles associated with external plug-ins – they’re right there, where you need them, whenever you need them. The compressor models capture the audio nuances and non-linear ballistics of industry classics, ranging from a Slow-Opto model, various RMS detection and soft knee circuits, through to super-fast peak and RMS based compression/limiting devices.
RACKEXTRA FX
The RackExtra FX portfolio combines the pristine quality and wide choice offered by boutique plug-ins with the convenience and low latency of onboard processing. It’s no secret that we have a passion bordering on obsession for crafting painstakingly faithful emulations of the most revered analogue outboard equipment. Drawing on the power of the XCVI Core, we have built hugely potent DSP kernels within the FPGA, allowing us to integrate our proven library of reverb, delay and modulator algorithms into dLive, with 16 FX slots available, each with a dedicated stereo return.
More +
Product Specs
Inputs | |
Mic/Line XLR Inputs | Balanced XLR, +48V phantom power |
Mic/Line Preamp | Fully recallable |
Analogue Gain | +5 to +60dB, 1dB steps |
Pad | -20dB Active PAD |
Maximum Input Level | +30dBu (PAD in) |
Input Impedance | >4kΩ (Pad out), >10kΩ (Pad in) |
Mic EIN | -127dB with 150Ω source |
Phantom Power indication | Per socket, internal or external phantom power sensing, triggered at 24V |
Digital Inputs | |
Type | AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω |
SRC range | 32k - 192kHz, with bypass option |
Outputs | |
Analogue XLR Outputs | Balanced, Relay protected |
Output Impedance | <75Ω |
Nominal Output | +4dBu = 0dB meter reading |
Maximum Output Level | +22dBu |
Residual Output Noise | -92dBu (muted, 20-20kHz) -90dBu (muted, 20-40kHz) |
Digital Outputs | |
Type | AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω |
Rates | 96kHz sampling rate, switchable to 48kHz, 44.1kHz |
System Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain, Pad out |
|
Dynamic Range | 110dB |
Input Sensitivity | -60 to +15dBu |
System Signal to Noise | -92dB |
Frequency Response | 20Hz - 30kHz +0/-0.8dB |
THD+N (analogue in to out) | 0.0015% @ +16dBu output, 1kHz 0dB gain |
Headroom | +18dB |
Internal operating Level | 0dBu |
dBFS Alignment | +18dBu = 0dBFS (+22dBu at XLR output) |
Meter Calibration | 0dB meter = -18dBFS (+4dBu at XLR out) |
Meter Peak indication | -3dBFS (+19dBu at XLR out) |
Sampling Rate | 96kHz +/- 20 PPM |
ADC | 24-bit Delta-Sigma |
DAC | 24-bit Delta-Sigma |
Latency | 0.7 ms (MixRack XLR in to XLR out, Input to Mix) + 5 samples, Surface to Mixrack (GigaACE hop) + 8 samples, DX32 to Mixrack (DX hop) |
Operating Temperature Range | 0 deg C to 35 deg C (32 deg F to 95 deg F) |
Mains Power | 100-240V AC, 50-60Hz, 110W max |
USB Audio playback | Mono/stereo .WAV files, 16/24bit, 44.1/48/96kHz |
USB Audio recording | Stereo .WAV files, 24bit 96kHz |
Dimensions and Weights | |
Width x Depth x Height x Weight | 481.6 x 309 x 221 mm 5U (19"x 12.2"x 8.7") x 10kg (22lbs) |
Width x Depth x Height x Weight, Boxed | 600 x 430 x 380 mm (23.6"x 16.9"x 15") x 12kg (26.5lbs) |
More +
Also Popular
Talk To Our Sales Professionals:
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Questions or concerns about your order?
Info
Resources
Payment Options
© 2024 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.