{"title":"Base Stations","description":"Dale Pro Audio carries a wide variety of Intercom Base Stations to easily connect, control and configure your intercom communication systems. We carry the industry’s best brands, such as Clear-Com, Studio Technologies, HME, and Pliant.","products":[{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-e88","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - E88","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754136145,"sku":"44708","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_1a94eaf0-08e2-49d0-9cfe-c9044b90a996.jpg?v=1768561636"},{"product_id":"telex-us-2002-2-channel-user-main-station","title":"RTS US?2002 2 Channel User\/Main Station","description":"\u003cp\u003eThe US-2002 Intercom User Station is designed for stationary use by personnel who may require selective access to two or \r\nmore intercom channels. It can be rack mounted or used as a desktop station. For rack mounting, optional hardware is required. \r\nFor desktop use the four rubber feet supplied.\u003c\/p\u003e\u003cp\u003eThe US-2002 can be used as a simple, multi-channel user station. Typically, in this application, no program sources or public \r\naddress output are connected and some advanced features can be disabled: the station simply provides talk, listen and call \r\ncapability for a single user. Alternatively, the US-2002 can function as a master station. In this configuration, most or all \r\nadvanced features are activated. Also, program inputs and public address output may be connected. This configuration is ideal \r\nfor command and control personnel such as directors, supervisors, etc.\u003c\/p\u003e\u003cp\u003eThe basic US-2002 can communicate with two (2) intercom channels. The number of channels can be increased by connecting \r\noptional ES-4000A Expansion Stations. Each ES-4000A adds four (4) additional channels, and up to four (4) of these \r\nexpansion stations can be connected together for a total of eighteen channels.\u003c\/p\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754144529,"sku":"45494","price":1539.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_38cceb68-75e9-4d3b-8a29-93bb2c99d519.jpg?v=1768557163"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-a3","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - A3","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754178961,"sku":"261857","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_ba033345-7773-4bb0-950d-a378593c904c.jpg?v=1768561638"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-b3","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - B3","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754179089,"sku":"261858","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_84d0fc2e-7e2f-4abb-acbb-ace86e46c901.jpg?v=1768552690"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-h3","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - H3","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754180945,"sku":"289477","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_3252b50f-160d-4ac5-b6a8-e5583d9a88e9.jpg?v=1768563464"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-f3","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - F3","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754200785,"sku":"441585","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_19fd7654-35c4-4b6b-ab7c-54940c0a5942.jpg?v=1768558931"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-a3r","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - A3R","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754201553,"sku":"453329","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c983b6d9-63ff-4fa6-8f33-e98ab18f8c0e.jpg?v=1768550927"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-b3r","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - B3R","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754202129,"sku":"453334","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_051d2253-4007-4753-b773-386affc9e816.jpg?v=1768561640"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-c3","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - C3","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754202449,"sku":"453341","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_3b3bd3d2-a6ff-4481-bbc2-3310e064d207.jpg?v=1768565263"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-c3r","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - C3R","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754202513,"sku":"453342","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_8b8b8b1c-80d3-496f-b660-28d1c233cdd8.jpg?v=1768563466"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-e88r","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - E88R","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754203089,"sku":"453350","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_6d21f399-3ec8-44e2-9f0b-f74157a64d24.jpg?v=1768550928"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-f3r","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - F3R","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754203537,"sku":"453359","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c3000866-51fb-4b95-9870-f546ab1552d2.jpg?v=1768555320"},{"product_id":"telex-btr-800-2-channel-frequency-agile-uhf-wireless-base-station-h3r","title":"RTS BTR-800 2-Channel Frequency Agile UHF Wireless Base Station - H3R","description":"\u003cp\u003eTwo channel UHF frequency agile wireless intercom system with two intercom channel access from each of four full duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), Enhanced ClearScan, talk\/listen headset station at the base, and much, much more. The BTR-800 is fully compatible with Telex, RTS and Clear-Com hardwired communications systems right out of the box. If your application requires the highest performance and utmost reliability, you need the new Telex Radiocom BTR-800 wireless intercom system.\u003c\/p\u003e\u003cp\u003eKey Features\u003c\/p\u003e\u003cdl\u003e\n\u003cdd\u003e Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies in 18 MHz bands\u003c\/dd\u003e\n\u003cdd\u003e Factory selected preset frequency groups, 1000' operating range, Transmit power level switch\u003c\/dd\u003e\n\u003cdd\u003e Independent front Portable Station enable\/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset mic type automatically\u003c\/dd\u003e\n\u003cdd\u003e Enhanced ClearScan two-button frequency selection for optimal location use, ranks available frequencies in order of reliability\u003c\/dd\u003e\n\u003cdd\u003e Simultaneous support of up to 4 beltpacks, expandable\u003c\/dd\u003e\n\u003cdd\u003e Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment\u003c\/dd\u003e\n\u003cdd\u003e Full function Talk\/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user on intercom channel\u003c\/dd\u003e\n\u003cdd\u003e Compatibility with Audiocom, Clear-Com, RTS\/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors\u003c\/dd\u003e\n\u003cdd\u003e Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity \u003c\/dd\u003e\n\u003c\/dl\u003e\u003cbr\u003e\u003cp\u003eCombine all of that with an easy-to-use graphical user interface that lets you get started right out of the box, and you've got the most innovative and versatile wireless intercom ever made. But features aren't the only story. The BTR-800 wireless intercom is a serious performer too. With technology leaps like Intelligent Power Control, combination tone code\/RF noise squelch and DSP digital audio processing, this is one wireless intercom that sounds great, even at a great distance! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour beltpacks per base station - Each BTR-800 base station can support up to four TR-800 or TR-825 wireless beltpacks in fulltime transmit, full duplex operation. Multiple base station\/beltpacks systems can be used together to meet the needs of virtually any wireless communications application.\u003c\/li\u003e\n\u003cli\u003eFrequency agile - Choose from 1440 user selectable frequencies using the 800's new revolutionary graphical user interface. Frequencies can be selected from groups of intermod free choices, or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational windows.\u003c\/li\u003e\n\u003cli\u003eUHF operation - The BTR-800, TR-800 and TR-825 operate in the UHF band from 470 to 740 MHz. Bases and beltpacks operate in specific 18 MHz operational bands. Contact Telex customer service for complete operational band details.\u003c\/li\u003e\n\u003cli\u003eEnhanced ClearScan frequency auto selection-Frequency selection has never been easier! This is an advanced form of our existing ClearScan technology. It actually looks at all of the available frequencies in the factory and user defined groups and ranks them so that the user knows the best frequencies to use. Now you can walk into a new venue in a new city and have a clear set of frequencies in less than a minute with the push of a couple of buttons!\u003c\/li\u003e\n\u003cli\u003eIntermodulation-free factory selected groups - Each 800 system comes with 24 factory selected, intermod avoiding groups that allow even the most uninitiated user to get started right out of the box. Telex has done all of the work for you!\u003c\/li\u003e\n\u003cli\u003eTwo-channel intercom access from each beltpack - Each TR-800 and TR-825 beltpack in the system can select between two hardwired intercom channels. Channels are run to the BTR-800 base station and can be 2-wire, 4-wire or mixed. The BTR-800 is fully compatible with AudioCom, RTS and Clear-Com hardwired intercom systems.\u003c\/li\u003e\n\u003cli\u003eDual Listen operation - Each TR-825 beltpack provides two volume controls: one for each intercom channel that allow for individual level control. Listen to Production in one ear and Tech in the other ear. The TR-825 can operate in either Stereo (split-feed) or Mono mode.\u003c\/li\u003e\n\u003cli\u003eDetachable beltpack antennas - TR-800 and TR-825 beltpacks feature detachable antennas that utilize stud type threaded connectors that do not have a fragile center pin to break off or bend. Detachable antennas make storage or shipping a breeze.\u003c\/li\u003e\n\u003cli\u003eTwo great battery options - TR-800 and TR-825 beltpacks can be operated from standard Alkaline AA batteries that provide up to 14 hours of continuous duty operation. For applications where rechargeable batteries are required optional NiMH battery packs are available. NiMH batteries do not develop harmful memories like NiCads and offer up to 12 hours of operation. Drop-in chargers are also available in single and four-gang configurations.\u003c\/li\u003e\n\u003cli\u003eStage Announce output with relay closure - Each beltpack can initiate the Stage Announce feature. The user's audio is routed out the back of the base station via a 3-pin XLR connector. The signal is dry, line level +8 dB and adjustable. A convenient relay closure is provided for triggering two-way radios, IFB sends, green-room speakers or any other closure activated device.\u003c\/li\u003e\n\u003cli\u003eWireless Talk Around (Broadcast ISO) - Each beltpack can momentarily route its audio only to the other wireless beltpacks on its current channel with the push of a button. The user's audio is lifted off of the intercom bus so that only the other wireless beltpacks can hear. This is great for private conversations in the heat of battle.\u003c\/li\u003e\n\u003cli\u003e\"Fifth Person\" Talk\/Listen station at base - The BTR-800 base station features a full talk\/listen headset station so that an additional user can communicate on one, the other, or both intercom channels at once.\u003c\/li\u003e\n\u003cli\u003eIntelligent Power Control - This new breakthrough technology takes system range and performance to a whole new level. Each beltpack senses when it is close to the base station and intelligently reduces its output by 10 dB. This effectively eliminates overloading the base station receiver front end which is the primary cause for the \"near \"– far\" desensing problem experienced in other wireless intercoms.\u003c\/li\u003e\n\u003cli\u003eCast magnesium beltpacks - TR-800 and TR-825 beltpacks are constructed of extremely light, strong and durable cast magnesium. That's the metal \"mag\" wheels are made from! Using magnesium substantially decreases the weight of the beltpack while assuring the utmost ruggedness and durability.\u003c\/li\u003e\n\u003cli\u003eGraphical user interface - The BTR-800, TR-800 and TR-825 have easy to use user interfaces utilizing state of the art LCD displays. Custom graphical menus on the BTR-800 allow access to all of the powerful features and system operational parameters. The menu structure has been specifically designed to be intuitive and easy to use right out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":37754203985,"sku":"453371","price":8303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_2dbb287d-aa83-4cc6-8a69-314de822c8cf.jpg?v=1768550929"},{"product_id":"pliant-technologies-ccu-22-crewcom-2-2-intercom-control-unit","title":"Pliant Technologies CCU-22 CrewCom 2+2 Intercom Control Unit","description":"\u003cp\u003e2-plus-2, 1RU Control Unit, establishes a CrewNet-based infrastructure allowing for system-wide access, control and monitoring of any active CrewCom device, and provides external connectivity via two 2-Wire and two 4-Wire ports simultaneously. (Device does not include a radio; a Radio Transceiver is required for wireless communication with Radio Packs.) \u003c\/p\u003e \r\n\u003cp\u003eThe CrewCom Control Unit is the foundational element of the CrewCom® system and establishes the CrewNet-based infrastructure while also providing external connections to common established intercom systems. By design, the CU contains no radio and is frequency agnostic and can therefore control and monitor any device across CrewNet regardless of radio frequency bands being utilized. With the combination of CrewCom® Radio Transceivers, each CU supports up to 50 Radio Packs, 18 Normal mode and 32 High Density mode, across all available RF bands.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eEach CU supports up to 50 Radio Packs across all RF bands (18 Normal mode RPs and 32 High Density mode RPs)\u003c\/li\u003e \r\n  \u003cli\u003eEasy-to-use interface with large informative backlit LCD display and quick access controls\u003c\/li\u003e \r\n  \u003cli\u003eSimultaneously active 2-Wire and 4-Wire intercom connections\u003c\/li\u003e \r\n  \u003cli\u003eFront panel USB ports for Radio Pack pairing, CrewCom device firmware updates, and computer connectivity\u003c\/li\u003e \r\n  \u003cli\u003eDuplex LC Single Mode Fiber and traditional Cat 5e or greater CrewNet connections\u003c\/li\u003e \r\n  \u003cli\u003eLAN port for CrewWare connectivity via computer network\u003c\/li\u003e \r\n  \u003cli\u003eFront panel headset monitor station\u003c\/li\u003e \r\n  \u003cli\u003eStage announce audio output\u003c\/li\u003e \r\n  \u003cli\u003eAUX In\/Out for program input and intercom audio output\u003c\/li\u003e \r\n  \u003cli\u003eGPO contact closure relays (x5)\u003c\/li\u003e \r\n  \u003cli\u003eSync input to receive sync from another CrewCom system\u003c\/li\u003e \r\n  \u003cli\u003e1RU rack mountable\u003c\/li\u003e \r\n  \u003cli\u003eIntegrated Ping function, which uses all LEDs to physically identify a target device\u003c\/li\u003e \r\n\u003c\/ul\u003e \r\n\u003cp\u003e\u003cbr\u003e \r\n  \u003cstrong\u003eThe Backbone: CrewNet™\u003c\/strong\u003e\u003cbr\u003e \r\nCrewNet is a newly-developed, robust and reliable proprietary network designed specifically for the demands of critical communication environments. It is the backbone for interconnection between CrewCom devices, which is key to the decentralized network architecture. CrewNet is capable of deploying a CrewCom system over a very large coverage area with Cat 5e (up to 100 m) and\/or Single Mode Fiber (up to 10 km).\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eIn The Box:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eControl Unit\u003c\/li\u003e \r\n  \u003cli\u003eAC Power Cord\u003c\/li\u003e \r\n  \u003cli\u003eUSB A to Micro B cable\u003c\/li\u003e \r\n  \u003cli\u003e15ft. (4.6 m) Cat 5e cable\u003c\/li\u003e \r\n  \u003cli\u003eQuick Start Guide\u003c\/li\u003e \r\n  \u003cli\u003eUSB Flash Drive that includes product documentation\u003c\/li\u003e \r\n  \u003cli\u003eWarranty Extension Registration Card\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Pliant Technologies","offers":[{"title":"Default Title","offer_id":37759506449,"sku":"1187040","price":8875.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_7a35eebe-8067-4aa3-9ba1-5a0bf2c97119.jpg?v=1761313939"},{"product_id":"pliant-technologies-ccu-44-crewcom-4-wire-intercom-control-unit","title":"Pliant Technologies CCU-44 CrewCom 4-Wire Intercom Control Unit","description":"\u003cp\u003e4-plus-4, 1RU Control Unit, establishes a CrewNet-based infrastructure allowing for system-wide access, control and monitoring of any active CrewCom device, and provides external connectivity via four 2-Wire and four 4-Wire ports simultaneously. (Device does not include a radio; a Radio Transceiver is required for wireless communication with Radio Packs.)\u003c\/p\u003e \r\n\u003cp\u003eThe CrewCom Control Unit is the foundational element of the CrewCom® system and establishes the CrewNet-based infrastructure while also providing external connections to common established intercom systems. By design, the CU contains no radio and is frequency agnostic and can therefore control and monitor any device across CrewNet regardless of radio frequency bands being utilized. With the combination of CrewCom® Radio Transceivers, each CU supports up to 50 Radio Packs, 18 Normal mode and 32 High Density mode, across all available RF bands.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eEach CU supports up to 50 Radio Packs across all RF bands (18 Normal mode RPs and 32 High Density mode RPs)\u003c\/li\u003e \r\n  \u003cli\u003eEasy-to-use interface with large informative backlit LCD display and quick access controls\u003c\/li\u003e \r\n  \u003cli\u003eSimultaneously active 2-Wire and 4-Wire intercom connections\u003c\/li\u003e \r\n  \u003cli\u003eFront panel USB ports for Radio Pack pairing, CrewCom device firmware updates, and computer connectivity\u003c\/li\u003e \r\n  \u003cli\u003eDuplex LC Single Mode Fiber and traditional Cat 5e or greater CrewNet connections\u003c\/li\u003e \r\n  \u003cli\u003eLAN port for CrewWare connectivity via computer network\u003c\/li\u003e \r\n  \u003cli\u003eFront panel headset monitor station\u003c\/li\u003e \r\n  \u003cli\u003eStage announce audio output\u003c\/li\u003e \r\n  \u003cli\u003eAUX In\/Out for program input and intercom audio output\u003c\/li\u003e \r\n  \u003cli\u003eGPO contact closure relays (x5)\u003c\/li\u003e \r\n  \u003cli\u003eSync input to receive sync from another CrewCom system\u003c\/li\u003e \r\n  \u003cli\u003e1RU rack mountable\u003c\/li\u003e \r\n  \u003cli\u003eIntegrated Ping function, which uses all LEDs to physically identify a target device\u003c\/li\u003e \r\n\u003c\/ul\u003e \r\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e \r\n  The Backbone: CrewNet™\u003c\/strong\u003e\u003cbr\u003e \r\nCrewNet is a newly-developed, robust and reliable proprietary network designed specifically for the demands of critical communication environments. It is the backbone for interconnection between CrewCom devices, which is key to the decentralized network architecture. CrewNet is capable of deploying a CrewCom system over a very large coverage area with Cat 5e (up to 100 m) and\/or Single Mode Fiber (up to 10 km).\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eIn The Box:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eControl Unit\u003c\/li\u003e \r\n  \u003cli\u003eAC Power Cord\u003c\/li\u003e \r\n  \u003cli\u003eUSB A to Micro B cable\u003c\/li\u003e \r\n  \u003cli\u003e15ft. (4.6 m) Cat 5e cable\u003c\/li\u003e \r\n  \u003cli\u003eQuick Start Guide\u003c\/li\u003e \r\n  \u003cli\u003eUSB Flash Drive that includes product documentation\u003c\/li\u003e \r\n  \u003cli\u003eWarranty Extension Registration Card\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Pliant Technologies","offers":[{"title":"Default Title","offer_id":37759506705,"sku":"1187041","price":10350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_5615481c-1f68-4b3d-968d-d50595d6cefd.jpg?v=1761231624"},{"product_id":"pliant-technologies-crt-900-900mhz-transceiver-for-crewcom-systems","title":"Pliant Technologies CRT-900 900MHz Transceiver for CrewCom Systems","description":"\u003cp\u003eThe CrewCom® Radio Transceiver houses a radio with corresponding antennas and serves as an access point enabling RF communications with CrewCom® Radio Packs. Using CrewNet as a backbone, up to 46 RTs can be positioned on the network throughout a wide coverage area by being linked back to a Control Unit either directly, through a Hub(s), or connected in a daisy-chain configuration.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eSupports both Normal and High Density modes of operation\u003c\/li\u003e \r\n  \u003cli\u003eOne RT supports up to 6 Normal mode or 32 High Density mode Radio Packs\u003c\/li\u003e \r\n  \u003cli\u003eTwo separate RF bands available in two models (CRT-900 \u0026amp; CRT-2400)\u003c\/li\u003e \r\n  \u003cli\u003eLED status indicators for data RX\/TX, operation mode, and error\u003c\/li\u003e \r\n  \u003cli\u003eCrewNet in connections (etherCON or Duplex LC Single Mode Fiber) with an addition single copper CrewNet thru connection for connecting up to a total of eight CrewCom Radio Transceivers in a daisy chain-configuration\u003c\/li\u003e \r\n  \u003cli\u003eMicro USB connection for firmware updates (also available through CrewNet)\u003c\/li\u003e \r\n  \u003cli\u003eIntegrated ping function which uses all LEDs to physically identify an RT\u003c\/li\u003e \r\n  \u003cli\u003eDual powering options (network power or external 48VDC, sold separately)\u003c\/li\u003e \r\n\u003c\/ul\u003e \r\n\u003cp\u003e\u003cstrong\u003eWhat's In The Box:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eRadio Transceiver\u003c\/li\u003e \r\n  \u003cli\u003eOmni-Directional Antenna (x2)\u003c\/li\u003e \r\n  \u003cli\u003e15ft. (4.6 m) Cat 5e cable\u003c\/li\u003e \r\n  \u003cli\u003eUSB A to Micro B cable\u003c\/li\u003e \r\n  \u003cli\u003eMounting Hardware and Bracket\u003c\/li\u003e \r\n  \u003cli\u003eProduct Overview Guide\u003c\/li\u003e \r\n  \u003cli\u003eWarranty Extension Registration Card\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Pliant Technologies","offers":[{"title":"Default Title","offer_id":37759507153,"sku":"1187046","price":2825.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_d780f582-2467-41e7-81e1-ebff69af13b6.jpg?v=1761231626"},{"product_id":"pliant-technologies-crt-2400-2-4ghz-transceiver-for-crewcom-systems","title":"Pliant Technologies CRT-2400 2.4GHz Transceiver for CrewCom Systems","description":"\u003cp\u003eThe CrewCom Radio Transceiver houses a radio with corresponding antennas and serves as an access point enabling RF communications with CrewCom® Radio Packs. Using CrewNet as a backbone, up to 46 RTs can be positioned on the network throughout a wide coverage area by being linked back to a Control Unit either directly, through a Hub(s), or connected in a daisy-chain configuration.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eSupports both Normal and High Density modes of operation\u003c\/li\u003e \r\n  \u003cli\u003eOne RT supports up to 6 Normal mode or 32 High Density mode Radio Packs\u003c\/li\u003e \r\n  \u003cli\u003eTwo separate RF bands available in two models (CRT-900 \u0026amp; CRT-2400)\u003c\/li\u003e \r\n  \u003cli\u003eCrewNet connections (etherCON or Duplex LC Single Mode Fiber**)\u003c\/li\u003e \r\n  \u003cli\u003eLED status indicators for data RX\/TX, operation mode, and error\u003c\/li\u003e \r\n  \u003cli\u003eCrewNet in connections (etherCON or Duplex LC Single Mode Fiber**) with an addition single copper CrewNet thru connection for connecting up to a total of eight CrewCom Radio Transceivers in a daisy chain-configuration\u003c\/li\u003e \r\n  \u003cli\u003eMicro USB connection for firmware updates (also available through CrewNet)\u003c\/li\u003e \r\n  \u003cli\u003eIntegrated ping function which uses all LEDs to physically identify an RT\u003c\/li\u003e \r\n  \u003cli\u003eDual powering options with either network power or external 48VDC\u003c\/li\u003e \r\n\u003c\/ul\u003e \r\n\u003cp\u003e\u003cem\u003e**CrewCom devices connected to CrewNet via a fiber port must receive power via a Pliant 48VDC power supply. (Sold Separately)\u003c\/em\u003e\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eWhat's In The Box:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eRadio Transceiver\u003c\/li\u003e \r\n  \u003cli\u003eOmni-Directional Antenna (x2)\u003c\/li\u003e \r\n  \u003cli\u003e15ft. (4.6 m) Cat 5e cable\u003c\/li\u003e \r\n  \u003cli\u003eUSB A to Micro B cable\u003c\/li\u003e \r\n  \u003cli\u003eMounting Hardware and Bracket\u003c\/li\u003e \r\n  \u003cli\u003eProduct Overview Guide\u003c\/li\u003e \r\n  \u003cli\u003eWarranty Extension Registration Card\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Pliant Technologies","offers":[{"title":"Default Title","offer_id":37759508817,"sku":"1187049","price":2825.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_a007ce9f-54cd-49d5-af58-e1bb925778b2.jpg?v=1761231628"},{"product_id":"clear-com-imf-3-interface-module-frame-for-eclipse-digital-intercom","title":"Clear-Com IMF-3 - Interface Module Frame for Eclipse Digital Intercom","description":"\u003cp\u003eThe IMF-3 holds up to 11 interface modules in a 3RU chassis. Modular rear-mounted connector units feature two RJ-45 connectors to the matrix ports and two DB-9s attaching the connected devices. The frame is used in conjunction with the PSU-101 rack-mountable dual power supply, providing power to the enclosed interfaces. (\u003cstrong\u003eInterface modules and PSU-101 power supply are sold separately.\u003c\/strong\u003e)\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37784942353,"sku":"6751","price":2810.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_d7c8cda8-4d2c-4382-8432-ddac2b925aa2.jpg?v=1764744749"},{"product_id":"comtek-bs-t25-216-base-station-transmitter","title":"Comtek BS T25-216 Base Station Transmitter","description":"\u003cp\u003eThe BST-25\/216 MHz is a professional quality, auxiliary base station transmitter designed to operate with the PR-216 and PR-216 Option 7 synthesized receivers in the newly assigned 216-217 MHz band under Part 95 of the FCC regulations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e57 user-selectable channels in the 216-217 MHz range: 38 standard narrow-band, non-companded channels; 19 high-fidelity narrow-band channels with companded audio processing.\u003c\/li\u003e\n\u003cli\u003eSingle-window, bright LED display for exact frequency and channel, VU bar graph meter, antenna condition and lock-out indicator.\u003c\/li\u003e\n\u003cli\u003eTest tone generator for receiver testing and audio level referencing.\u003c\/li\u003e\n\u003cli\u003eBalanced mic or line level with 60 dB of control range to accommodate any audio level.\u003c\/li\u003e\n\u003cli\u003eMicro controller automatically sets the modulation deviation, the audio mode for companding processing, and the EQ when corresponding channels are selected.\u003c\/li\u003e\n\u003cli\u003eCan be rack mounted for AC or 12 volt DC power and can accommodate a variety of remote antennas.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Comtek","offers":[{"title":"Default Title","offer_id":37784955089,"sku":"7205","price":1768.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_91469927-6225-4437-b2fa-01ad0473448a.jpg?v=1767344865"},{"product_id":"clear-com-ms-702-two-channel-main-station-for-40-headset-or-10-speaker-stations","title":"Clear-Com MS-702 - Two-Channel Main Station for Encore Series Intercom","description":"\u003cp\u003eCompact, feature-laden, single-rack-space intercom main station supports up to 60 headsets or 20 speaker stations on two intercom channels. Fail-safe power supply has separate short-circuit protection and auto-reset for each channel. Other features include: Channel A B linking; visual and audible call signaling; program input with individual channel level controls and program on\/off\/interrupt switches; remote mic kill switch, external relay circuit; and universal voltage power supply.\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37785919825,"sku":"92921","price":2090.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_205a7b8b-0b96-46f5-a137-673b4e3c7c6f.jpg?v=1764665484"},{"product_id":"clear-com-tw-47-two-way-radio-interface-for-clear-com-or-rts-intercom","title":"Clear-Com TW-47 - Two-Way Radio Interface for Encore Series Intercom","description":"\u003cp\u003e\u003cstrong\u003eClear-Com\/RTS 2-Way Radio Interface, connects Clear-Com or RTS to any 2-way radio. \u003c\/strong\u003eCompatible with both Clear-Com and RTS¨, TW-47 connects virtually any set of walkie-talkies to anyone on the wired partyline intercom; simply use one walkie-talkie as a basestation. The base station radio is keyed from the intercom call signal. Extensive RF and EMI isolation prevents interference from entering the intercom system. Separate transmit and receive level controls are provided, along with audio level and transmitter keying indicators. The stand-alone interface is powered by the intercom line.\u003c\/p\u003e  \r\n\u003cp\u003eNote:Ê Two-way radio must have headset and microphone jacks.\u003c\/p\u003e  \r\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterfaces any 2-way radio to a Clear-Com, RTS, or compatible system\u003c\/li\u003e\n\u003cli\u003eAccepts any walkie-talkie\u003c\/li\u003e\n\u003cli\u003ePowered by the intercom line\u003c\/li\u003e\n\u003cli\u003eEasy to interconnect\u003c\/li\u003e\n\u003cli\u003eIndividual transmit and receive level controls\u003c\/li\u003e\n\u003cli\u003eBi-color LED audio level indicator\u003c\/li\u003e\n\u003cli\u003eSmall footprintÐwill fit anywhere\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37785933457,"sku":"93027","price":810.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_61ccad81-56e3-46f4-b7bd-0525cb66785e.jpg?v=1764663673"},{"product_id":"comtek-bst-75-base-station-transmitter","title":"Comtek BST-75 Base Station Transmitter","description":"\u003cp\u003eThe BST-75 mini base station transmitter meets the highest professional standards while offering outstanding value and the most advanced technology available. This versatile and innovative transmitter is simple to use, yet it has sophisticated features such as \"Flash Memory\" 98-channel programmability with synthesized manual 10-channel selectable user-switch. Plus a unique multifunction RF indicator detects bad antenna load, RF presence, coaxial cable short or open condition for quick and easy troubleshooting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLarge Area Assistive Listening Systems\u003c\/li\u003e\n\u003cli\u003eSimultaneous Multiple Language Interpretation\u003c\/li\u003e\n\u003cli\u003eCompact Design for Multiple Transmitter Installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Comtek","offers":[{"title":"Default Title","offer_id":37786349777,"sku":"249991","price":728.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_9ec05cdb-5287-49dc-9609-6683c317110c.jpg?v=1767344875"},{"product_id":"clear-com-lq-4w2-4-wire-partyline-over-ip-module","title":"Clear-Com LQ-4W2 4-Wire Partyline Over IP Module","description":"\u003cp\u003eThe LQ-4W2 is a compact box that enable connection of 4-wire audio devices over LAN, WAN or Internet IP infrastructures. The LQ-4W2 can interconnect with devices, such as analog ports of any matrix intercom systems, analog telephone circuits, two-way radio gateways and audio consoles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnectivity \u003cul\u003e \u003cli\u003eTransport audio and call signaling over LAN, WAN and Internet networks\u003c\/li\u003e \u003cli\u003eWide range of bitrate settings\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eLinking\u003cbr\u003e \u003cul\u003e \u003cli\u003eUp to 6 units can link together (both 4-wire and partyline)\u003c\/li\u003e \u003cli\u003eMultiple groups of six in any network\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003ePower Options\u003cbr\u003e \u003cul\u003e \u003cli\u003ePower-over-Ethernet (PoE)\u003c\/li\u003e \u003cli\u003eExternal wall DC adapter\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eAudio\u003cbr\u003e \u003cul\u003e \u003cli\u003eLow-latency OPUS CODEC\u003c\/li\u003e \u003cli\u003e12 KHz frequency response\u003c\/li\u003e \u003cli\u003ePoint-to-point and group audio routing\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e2 Port 4-Wire Device\u003cbr\u003e \u003cul\u003e \u003cli\u003eProfessional etherCON connectors\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eCore Configurator Manager (CCM)ÊSoftware\u003cbr\u003e \u003cul\u003e \u003cli\u003eBrowser-based configuration for PC, MAC and Tablet\u003c\/li\u003e \u003cli\u003eWeb server inside each device (no additional software needed)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37787566033,"sku":"797134","price":2985.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_ad58f7ae-410f-431e-b919-bd5c784412ca.jpg?v=1764662845"},{"product_id":"clear-com-lq-2w2-2-wire-partyline-over-ip-module","title":"Clear-Com LQ-2W2 2-Wire Partyline Over IP Module","description":"\u003cp\u003eThe LQ-2W2 enables the connection of 2-wire partyline audio devices over LAN, WAN or Internet IP infrastructures. Two standalone partyline intercom circuits can easily be constructed by connecting two LQ-2W2 interfaces. The LQ-2W2 is both Clear-Com and RTS compatible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnectivity \u003cul\u003e \u003cli\u003eTransport audio and call signaling over LAN, WAN and Internet networks\u003c\/li\u003e \u003cli\u003eWide range of bitrate settings\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eLinking \u003cul\u003e \u003cli\u003eUp to 6 units can link together (both 4-wire and partyline)\u003c\/li\u003e \u003cli\u003eMultiple groups of six in any network\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003ePower Options \u003cul\u003e \u003cli\u003ePower-over-Ethernet (PoE)\u003c\/li\u003e \u003cli\u003eExternal wall DC adapter\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eAudio \u003cul\u003e \u003cli\u003eLow-latency OPUS CODEC\u003c\/li\u003e \u003cli\u003e12 KHz frequency response\u003c\/li\u003e \u003cli\u003ePoint-to-point and group audio routing\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e2 Port Partyline Device \u003cul\u003e \u003cli\u003eMini Main Station with IPÊconnectivity\u003c\/li\u003e \u003cli\u003eProfessional XLRÊconnectors\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eCore Configurator Manager (CCM)ÊSoftware \u003cul\u003e \u003cli\u003eBrowser-based configuration for PC, MAC and Tablet\u003c\/li\u003e \u003cli\u003eWeb server inside each device (no additional software needed)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37787566097,"sku":"797135","price":2985.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b517ed1a-3bfb-4e0e-b1a7-18d93cc0ad54.jpg?v=1764678173"},{"product_id":"clear-com-lq-r4w8-8-channel-ip-intercom-base-station","title":"Clear-Com LQ-R4W8 8-Channel IP Intercom Base Station","description":"\u003cp\u003eThe LQ-R4W8 enables the connections of 4-wire audio devices over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse HX frames via the IVC-32-HX interface card over LAN, WAN and Internet. Connect up to 6 panels together to create standalone intercom groups. The LQ-R4W8 supports ECS, EHX and Drake 4000 II panels (4-wire + data).\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37787716753,"sku":"907693","price":6280.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_9cf66926-dab0-4ddc-b18c-212986456b14.jpg?v=1764665488"},{"product_id":"clear-com-lq-r2w4-ip-intercom-base-station","title":"Clear-Com LQ-R2W4 IP Intercom Base Station","description":"\u003cp\u003eThe LQ-R2W4 enables the connection of partyline audio devices over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse HX frames via the IVC-32-HX interface card over LAN, WAN and Internet. Connect up to 6 panels together to create standalone partyline intercom group. The LQ-R2W4 is Clear-Com and RTS compatible. Each port has Female and Male XLR connectors to allow loop through.\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37787720913,"sku":"908896","price":5070.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_76faab49-85bd-4ff3-a30d-03a9508718c5.jpg?v=1764679973"},{"product_id":"clear-com-lq-r2w4-4w4-4x4-ip-intercom-base-station","title":"Clear-Com LQ-R2W4-4W4 - 4x4 IP Intercom Base Station","description":"\u003cp\u003eThe LQ-R2W4-4W4 enables the connection of both partyline and 4-wire audio over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse HX frames via the IVC-32-HX interface card over LAN, WAN and Internet. The partyline connections are compatible with Clear-Com and RTS; while the 4-wire connections can support ECS, EHX and Drake 4000 II panels.\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37787720977,"sku":"908897","price":6280.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_21d9fc1e-f05a-4829-a95e-51ddc713972a.jpg?v=1764662833"},{"product_id":"hme-bs410-base-station-for-dx410-intercom-systems","title":"HME BS410 Base Station for DX410 Intercom Systems","description":"\u003cp\u003eThe BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and\/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTwo-channels\u003c\/li\u003e \u003cli\u003e7kHz wideband audio\u003c\/li\u003e \u003cli\u003e2-wire and 4-wire bridging\u003c\/li\u003e \u003cli\u003e2-wire auto-nulling\u003c\/li\u003e \u003cli\u003eLost packet concealment\u003c\/li\u003e \u003cli\u003eUpgraded radio\u003c\/li\u003e \u003cli\u003eSupports up to 15 beltpacks and\/or wireless headsets\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003eThe DX410 is a newly designed two-channel digital wireless system, operating in the 2.4GHz band, that delivers an overall better experience in performance, range and sound. The system features 7kHz wideband audio, 2-wire and 4-wire bridging, and 2-wire auto-nulling for fast integration with Clear-Com or TW wired partyline systems.\u003c\/p\u003e","brand":"HME","offers":[{"title":"Default Title","offer_id":37787761937,"sku":"949854","price":4995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_6b135631-75b4-4b69-8ce5-fa09df5ed0c0.jpg?v=1761897140"},{"product_id":"clear-com-ikb-12p-digital-partyline-industrial-intercom-station","title":"Clear-Com IKB-12P - 12-Button Intercom Station (With Logo)","description":"\u003cp\u003eIKB-12 and HRI-12 intercom stations are designed to be a part of the HCS Industrial Intercom System providing a high-capacity single channel partyline intercom to intercom stations with point-to-point and point-to-multipoint audible and visual call signalling with caller identification. The stations are flush mount installation on an electrical back box. They include an active handset cradle which detects the handset and places the station into the partyline when taken off hook. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHCS Industrial Intercom\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle Channel Partyline\u003c\/li\u003e\n  \u003cli\u003eAdvanced Call Signals\n    \u003cul\u003e\n      \u003cli\u003ePoint-To-Point\u003c\/li\u003e\n      \u003cli\u003ePoint-To-Multipoint\u003c\/li\u003e\n      \u003cli\u003eAudible Buzzer\u003c\/li\u003e\n      \u003cli\u003eVisual Caller Identification\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHMS-4X Main Station\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNetworked System Host\u003c\/li\u003e\n  \u003cli\u003e1 HMS-4X with HLI-ET2 per system\u003c\/li\u003e\n  \u003cli\u003eHCS Firmware Features\u003c\/li\u003e\n  \u003cli\u003eCold Standby Redundancy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIKB\/HRI Intercom Stations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 64 IKB\/HRI Intercom Stations\n    \u003cul\u003e\n      \u003cli\u003eHandset\u003c\/li\u003e\n      \u003cli\u003e12 Buttons for Call Signals\u003c\/li\u003e\n      \u003cli\u003e28 GPI for Call Signals\u003c\/li\u003e\n      \u003cli\u003eIP65 Environmental Rating (when flush-mounted to a wall or back box, with appropriate perimeter seals)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHCS Configuration \/ Management\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy to use browser configuration\u003c\/li\u003e\n  \u003cli\u003eFast front panel control \/ configuration\u003c\/li\u003e\n  \u003cli\u003ePlug-and-go with auto discovery\u003c\/li\u003e\n  \u003cli\u003eCentral upgrades from main station\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37788018769,"sku":"1008151","price":3290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c36f33ee-1106-41d8-8aa2-e2d813830607.jpg?v=1764680906"},{"product_id":"clear-com-fsii-base-ii-freespeak-digital-wireless-base-station","title":"Clear-Com FSII-BASE-II - FreeSpeak Digital Wireless Base Station (for 25 Beltpacks \/ XLR4M)","description":"\u003cp\u003eThe FSII-BASE-II is a base station for the wireless FreeSpeak IIÊ1.9GHz and 2.4GHz active transceiver and beltpacks with four 2-wire analog partyline connections, four 4-wire audio connections and four digital displays with soft keys. The base station can operateÊ a mix of up to 25 1.9GHzÊ and\/or 2.4 GHz beltpacks on a single system. The base station can be used in Main Station mode with Talk and Call soft keys or as a Headset Station for communication and monitoring from the panel.The base station's digital displays allow easy system configuration directly from the base station or through the browser-based Core Configuration Manager tool.\u003c\/p\u003e  \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e  \r\n\u003cul\u003e  \r\n  \u003cli\u003eRouting and configuration of up to 25 FSIIÊbeltpacks\u003c\/li\u003e  \r\n  \u003cli\u003eBrowser-based configuration tool\u003c\/li\u003e  \r\n  \u003cli\u003eFour 2-wire ports with call signal, auto-nulling\u003c\/li\u003e  \r\n  \u003cli\u003eFour 4-wire ports with call signal\u003c\/li\u003e  \r\n  \u003cli\u003eOne dry contact relays\u003c\/li\u003e  \r\n  \u003cli\u003eMulti-mode user interface with monitoring, setup and main station modes with assignable soft keys\u003c\/li\u003e  \r\n  \u003cli\u003eDedicated front panel keys for remote mic kill, stage announce and all talk\u003c\/li\u003e  \r\n  \u003cli\u003eSupports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station\u003c\/li\u003e  \r\n  \u003cli\u003eMatrix and partyline configurations support up to 12 channels and\/or groups\u003c\/li\u003e  \r\n\u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37788207377,"sku":"1171835","price":11510.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b4b5c036-eac4-41ad-b447-e98c3b29a2bb.jpg?v=1765955210"},{"product_id":"clear-com-lq-4wg2-2-channel-4-wire-partyline-over-ip-module","title":"Clear-Com LQ-4WG2 2-Channel 4-Wire Partyline Over IP Module","description":"\u003cp\u003eThe LQ-4WG2 is a compact box that enable connection of 4-wire with GPIO audio over LAN, WAN or Internet IP infrastructures. LQ Series devices can also connect to Eclipse HXÊframes via the IVC-32-HX interface card over LAN, WAN and Internet. The LQ-4WG2 can interconnect with devices, such as analog ports of any matrix intercom systems, analog telephone circuits, two-way radio gateways and audio consoles.\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37788207505,"sku":"1171857","price":3060.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_3a79855f-2184-41f9-8f2c-18d619f1446b.jpg?v=1764665481"},{"product_id":"clear-com-lq-r4wg8-8-channel-ip-intercom-base-station","title":"Clear-Com LQ-R4WG8 8-Channel IP Intercom Base Station","description":"\u003cp\u003eThe LQ-R4WG8 enables the connections of 4-wire with GPIO audio  over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse HX frames via the IVC-32-HX interface card over LAN, WAN and Internet. Connect up to 6 panels together to create standalone intercom groups.\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37788207633,"sku":"1171858","price":5980.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c8f59764-629c-4809-891a-10bf3157f990.jpg?v=1764681766"},{"product_id":"clear-com-lq-r2w4-4wg4-8-channel-ip-intercom-base-station","title":"Clear-Com LQ-R2W4-4WG4 8-Channel IP Intercom Base Station","description":"\u003cp\u003eThe LQ-R2W4-4WG4 enables the connection of both partyline and 4-wire with GPIO audio over LAN, WAN or Internet IP infrastructures in a 1RU panel. LQ Series devices can also connect to Eclipse HXÊframes via the IVC-32-HX interface card over LAN, WAN and Internet. The partyline connections are compatible with Clear-Com and RTS.\u003c\/p\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":37788207761,"sku":"1171859","price":6280.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b49712b3-88f1-457e-b181-5df97acd6395.jpg?v=1764662836"},{"product_id":"clear-com-fsii-base-ii-5-freespeak-ii-base-station-for-5-beltpacks-with-xlr5-headset-connection","title":"Clear-Com FSII-BASE-II-X5 - FreeSpeak Digital Wireless Base Station (for 25 Beltpacks \/ XLR5F)","description":"\u003cp\u003eThe FreeSpeak II-Base-II-5 is a standalone wireless system that can connect up to 5 full-duplex beltpacks. Up to 10 active transceiver antennas can enable beltpack-to-base staion distance range up to 3,200ft (1,000m). The system has 4-wire and partyline intercom connectivity, program feed input, stage announce, IFB, up to 5 wireless partyline groups and partyline call alert functionality. The base station can intelligently mix 1.9GHz and 2.4GHz system components, such as wireless beltpacks and transceiver antennas on the same system.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n\u003cli\u003eRouting and configuration of up to 5 FSII beltpacks\u003c\/li\u003e \r\n\u003cli\u003eBrowser-based configuration tool\u003c\/li\u003e \r\n\u003cli\u003eMulti-mode user interface with monitoring, setup and main station modes with assignable soft keys\u003c\/li\u003e \r\n\u003cli\u003eSupports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":7959540072508,"sku":"1290071","price":11510.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_1bc4cfa8-d4e4-46f5-9d85-99653d720ac6.jpg?v=1765965089"},{"product_id":"clear-com-fsii-base-ii-5-freespeak-ii-base-station-for-5-beltpacks","title":"Clear-Com FSII-BASE-II-5 - FreeSpeak Digital Wireless Base Station (for 5 Beltpacks \/ XLR4M)","description":"\u003cp\u003eThe FreeSpeak II-Base-II-5 is a standalone wireless system that can connect up to 5 full-duplex beltpacks. Up to 10 active transceiver antennas can enable beltpack-to-base staion distance range up to 3,200ft (1,000m). The system has 4-wire and partyline intercom connectivity, program feed input, stage announce, IFB, up to 5 wireless partyline groups and partyline call alert functionality. The base station can intelligently mix 1.9GHz and 2.4GHz system components, such as wireless beltpacks and transceiver antennas on the same system.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eRouting and configuration of up to 5 FSII beltpacks\u003c\/li\u003e \r\n  \u003cli\u003eBrowser-based configuration tool\u003c\/li\u003e \r\n  \u003cli\u003eMulti-mode user interface with monitoring, setup and main station modes with assignable soft keys\u003c\/li\u003e \r\n  \u003cli\u003eSupports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Clear-Com","offers":[{"title":"Default Title","offer_id":7959542693948,"sku":"1290072","price":7830.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_723eff98-5d1c-466c-9269-b9fcbc29ceaa.jpg?v=1765953500"},{"product_id":"glensound-beatrice-r4-4-channel-network-audio-rackmount-intercom","title":"Glensound Beatrice R4 4 Channel Network Audio Rackmount Intercom","description":"\u003cp\u003eThe Glensound BEATRICE R4 is a robust, 4* channel 1RU rackmount intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.\u003c\/p\u003e \r\n\u003cp\u003eIt is part of the Beatrice intercom system that utilises the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks. As such the BEATRICE R4 is also fully compatible with other manufacturers' equipment using the Dante protocol.\u003c\/p\u003e \r\n\u003cp\u003eThe Beatrice R4 is also AES67 compliant.\u003c\/p\u003e \r\n\u003cp\u003eThis small desktop unit was deigned to be very easy to use for the operator and simple to setup for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003e4 Channels \u003c\/strong\u003e\u003cbr\u003e \r\n One single user connected to the unit can listen and communicate with 4* separate locations on the network. Depending upon how the Dante network has been routed the incoming audio circuits and outgoing circuits can be different locations. \u003cbr\u003e \r\nPLEASE NOTE THERE IS A LIMITATION TO INCOMING NETWORK STREAMS SEE '*' IN SPECIFICATION l \u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eDante Routing \u0026amp; Partyline \u003c\/strong\u003e\u003cbr\u003e \r\nAudio routing to\/ from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 4 channels). An inbuilt partyline facility allows any of the 4 incoming circuits to be routed to any of the 4 output circuits making both simple partyline and more complex group circuits easily configured.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eOnboard Mic \u0026amp; External Mic Input \u003c\/strong\u003e\u003cbr\u003e \r\nA good quality, clear sounding microphone amplifier designed for communication purposes is fitted which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. This microphone amp has two microphone sources, either the inbuilt front panel mounted electret capsule which provides good voice intelligibility from normal working distances or a balanced XLR input for connecting external gooseneck microphones to. Twelve Volt Phantom power is also available and can be turned on\/ off as required.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eIntelligible Loudspeaker\u003c\/strong\u003e\u003cbr\u003e \r\nWhat's the point of an intercom unit if the onboard speaker is so cheap that you can't understand what is being said to you? Glensound tried hundreds of different drive units before settling on the one used in the Beatrice R4. They chose it because it had a much cleaner sound and better frequency response for vocals than any other speaker on the market that would fit in a 1RU subrack.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eVolume, Panning \u0026amp; Incoming Levels \u003c\/strong\u003e\u003cbr\u003e \r\n The front panel features an easy to use volume\/ setup control. This multifunctional control provides day to day operational control of: \u003cbr\u003e \r\n A) Overall volume control (just turn the knob) \u003cbr\u003e \r\n B) Incoming channel level (push the speak key and turn the knob simultaneously) \u003cbr\u003e \r\nC) Panning (push the speak key and push and turn the knob simultaneously)\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eMains or PoE Powered \u003c\/strong\u003e\u003cbr\u003e \r\nAn inbuilt wide range switch mode mains power supply is fitted for powering the Beatrice D4. It is terminated with a standard IEC plug, making it easy to plug in wherever you are in the World. It can also be powered via the Ethernet cable by standard PoE (Power over Ethernet), which can be supplied by an external PoE switch or a midspan power injector.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eHeadphone Output \u003c\/strong\u003e\u003cbr\u003e \r\nOne of Glensound's unique headphone amplifiers are fitted to the Beatrice D4, these allow either low or high impedance headphones to be used and automatically adjust the output level to match the impedance of headphones in use. The headphone amplifier is stereo and sources can be panned to left or right ears as desired. The unique headphone amplifier can also drive mono earpieces from its stereo output without any performance issues. Headphone connection is via a standard 6.35mm TRS jack socket located out the way on the rear panel.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eCall Function \u003c\/strong\u003e\u003cbr\u003e \r\nA simple call function is inbuilt allowing the operator of one unit to call\/alert other users that they want to communicate with them. To call another user the operator double taps the speak key of the channel they want to call, this then flashes a bright yellow call LED on the other users keypanel, which continues to flash until the call is answered. As well as flashing a LED at the receiving end of the call an audible 'beep' can be set to alert the user that an incoming call has been placed to them.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eDisplay for Setup \u003c\/strong\u003e\u003cbr\u003e \r\nTo make setup of the unit easy and intuitive a display is provided on the front panels. This display provides a simple menu system for setting up such items as: Button Configuration Input Type (Mic\/ Line) Microphone Gain Phantom Power On\/ Off Sidetone Level (Own voice in own headphones) Partyline\/ Loop Through Mode Mixing\/ Cutting of Partyline when User Speaks\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003ePresence Indicator \u003c\/strong\u003e\u003cbr\u003e \r\nEach channel has it's own red LED that acts as a presence detector on the incoming audio circuit. When audio is detected the LED is lit and it stays lit for a short period after the incoming audio stops\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eBuilt to Last \u003c\/strong\u003e\u003cbr\u003e \r\nThe Beatrice R4 is manufactured using lightweight but strong custom designed aluminium extrusions for the front and side panels and lightweight but strong extruded aluminium sheet for the lid and base. Front and rear panels are anodised and laser etched and side panels and lid\/ base are powder coated in an aesthetically pleasing textured black powder coat.\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":8301494960188,"sku":"1443343","price":1779.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_84c07e4d-4292-43a6-8608-42bc3d40308e.jpg?v=1763551312"},{"product_id":"glensound-beatrice-r8-8-channel-dante-aes67-intercom-station-3-pin-xlr-female","title":"Glensound Beatrice R8 - 8-Channel Dante \/ AES67 Intercom Station (3-Pin XLR Female)","description":"\u003cp\u003eThe Glensound BEATRICE R8 is a versatile and fully featured 8 channel rackmount intercom with crystal clear audio designed for broadcast,theatre and professional audio applications.\u003c\/p\u003e \r\n\u003cp\u003eIt is part of the Beatrice intercom system that utilizes the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks, it is also AES67 compliant. As such the BEATRICE R8 is fully compatible with other manufacturers' equipment using the Dante and\/ or AES67 protocols.\u003c\/p\u003e \r\n\u003cp\u003eThis 1RU rackmount intercom was designed to be very easy to use for the operator and simple to setup for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003e8 Channels Of Intercom \u003c\/strong\u003e\u003cbr\u003e \r\nOne single user connected to the unit can listen and communicate with 8 separate locations on the network. Depending upon how the Dante network has been routed the incoming audio circuits and outgoing circuits can be different locations.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003e2 Racks make 16 Channels \u003c\/strong\u003e\u003cbr\u003e \r\nTwo Beatrice R8 racks can be joined together by just a pair of digital S\/PDIF cables making a fully featured 2RU 16 channel intercom unit, with groups, mics, speakers and other resources shared between the 2 units.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eDante Routing \u0026amp; Partyline \u003c\/strong\u003e\u003cbr\u003e \r\nAudio routing to\/ from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 8 channels). Therefore it includes an inbuilt fixed ratio 14 input 19 output mixer matrix with inputs and outputs connected directly to the Dante \/ AES67 network which allows for setting up partyline and complex group circuits.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eOnboard Mic \u0026amp; External Mic Input \u003c\/strong\u003e\u003cbr\u003e \r\nA good quality, clear sounding microphone amplifier designed for communication purposes is fitted which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. This microphone amp has two microphone sources, either the inbuilt front panel mounted electret capsule which provides good voice intelligibility from normal working distances or a balanced XLR input for connecting external gooseneck microphones to. Twelve Volt Phantom power is also available and can be turned on\/ off as required via an internal link.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eHigh Output Intelligible Loudspeaker \u003c\/strong\u003e\u003cbr\u003e \r\nWhat's the point of an intercom unit if the onboard speaker is so cheap that you can't understand what is being said to you? Glensound tried hundreds of different drive units before settling on the one used in the Beatrice R8. They chose it because it had a much cleaner sound and better frequency response for vocals than any other speaker on the market that would fit in a 1RU subrack\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eMains or PoE Powered \u003c\/strong\u003e\u003cbr\u003e \r\nAn inbuilt wide range switch mode mains power supply is fitted for powering the Beatrice R8. It is terminated with a standard IEC plug, making it easy to plug in wherever you are in the World. The unit can also be powered via the Ethernet cable by standard PoE (Power over Ethernet) on either of the copper Ethernet ports. The PoE power can be supplied by an external PoE switch or a midspan power injector.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eRedundant Twin Copper \u0026amp; Twin Fibre Ethernet Interface \u003c\/strong\u003e\u003cbr\u003e \r\nWhen ultra reliable communications is needed for the utmost important jobs glitch free redundant network circuits can be set up using the primary and TM secondary Dante network ports. There are 2 copper Ethernet ports on Neutrik Ethercons and also 2 fibre Ethernet ports presented as SFP slots (SFP modules not included). Redundant networks can be set up across any of these ports. These ports can also be setup as a network switch.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eGPIO\u003c\/strong\u003e \u003cbr\u003e \r\nThere are nine solid state relay outputs. One of these outputs is triggered when any speak key is on (useful for dimming external loudspeakers or red light controls), the other eight are triggered individually when their associated channel receives a call. In total there are 12 loop closure inputs. 10 of these control the talk keys (the 8 channels, talk to group \u0026amp; talk to all) and the other 2 provide internal \u0026amp; external LS cuts\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eMicrophone Level Meter \u003c\/strong\u003e\u003cbr\u003e \r\nAn eight LED front panel multipurpose indicator is used to indicate the outgoing microphone level.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eChannel Input and Output Gain Controls \u003c\/strong\u003e\u003cbr\u003e \r\nFor maximum flexibility gain can be applied to incoming audio signals and outgoing signals separately. A row of LEDs indicate the current gain setting when a channels input or output is being adjusted.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eCall Function \u003c\/strong\u003e\u003cbr\u003e \r\nA simple call function is inbuilt allowing the operator of one unit to call\/alert other users that they want to communicate with. A bright front panel illuminated yellow round switch is used for calling the other party and also illuminates to indicate that you have been called. As well as illuminating a LED at the receiving end of the call an audible 'beep' can be set to alert the user that an incoming call has been placed to them.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003ePresence Indication \u003c\/strong\u003e\u003cbr\u003e \r\nA front panel illuminated red switch is used to indicate the presence of incoming audio on that channel.When audio is detected on the channel the switches internal red LED is illuminated, the red LED then stays on for a short period after the incoming audio stops to help the operator identify who has been talking to them.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eSpeaker Output \u003c\/strong\u003e\u003cbr\u003e \r\nAs well as the front panel internal loudspeaker a balanced analogue output is provided for connecting to an external powered loudspeaker\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003e4-Wire Connectivity \u003c\/strong\u003e\u003cbr\u003e \r\nTwo traditional analogue 4-wire circuits can be connected to two of the R8's intercom channels by utilising the versatile analogue inputs and outputs.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eLocal Input and Output Circuits \u003c\/strong\u003e\u003cbr\u003e \r\nFor increased versatility there are 2 local balanced analogue audio inputs and 2 local balanced analogue outputs. The inputs have input gain controls and presence detectors on them (just like an intercom's channel input) and are routed directly to two output channels on the Dante \/ AES67 network. The outputs are fed directly from two input channels from the Dante \/ AES67 network.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eMixer Matrix For Partyline \u003c\/strong\u003e\u003cbr\u003e \r\nFor setting up more complex groups and partyline circuits that could not be achieved via Dante controller or your AES67 router, an inbuilt fixed ratio mixer is supplied. It has 14 audio inputs direct from the network and 19 mix outputs to the network. 5 of the mixers have inbuilt automatic audio ducking circuits.\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":8301495025724,"sku":"1443346","price":2844.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_3ee8110c-9cf6-4c0c-b13b-c4c2dd82e541.jpg?v=1763549590"},{"product_id":"studio-technologies-model-348-intercom-station","title":"Studio Technologies Model 348 Intercom Station","description":"\u003cp\u003eThe Model 348 Intercom Station offers eight talk-and-listen audio channels that can be configured for intercom, talent cueing (IFB), and REMI\/At-Home applications. Utilizing Dante® audio-over-Ethernet network technology, the desktop unit offers extensive resources in a compact table-top enclosure. It is ideal for traditional sports and news broadcasting, live event, corporate AV, theater, and eSports applications.\u003c\/p\u003e\r\n\u003cp\u003eOver a standard IP network, multiple Model 348 units can be used in party-line (PL) intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies Model 5422 Dante Intercom Audio Engine. Units can also be used \"point-to-point\" or interfaced with Dante-compatible matrix intercom systems. The unit includes two Neutrik etherCON RJ45 connectors for redundant network connections. The primary network connection can provide power to the unit using standard Power-over-Ethernet (PoE) network switches. It can also be DC powered using a 10-18 volt source that is connected with a broadcast-standard 4-pin XLR connector. If both the PoE and DC power sources are connected the unit will be powered by the PoE supply only.\u003c\/p\u003e\r\n\u003cp\u003eThe Model 348 can be used with intercom-style and personal-computer gaming headsets with dynamic or electret microphones through the 5-pin female XLR headset connector or with a dynamic gooseneck-style microphone through the 1\/4\" gooseneck connector. A low-noise microphone preamplifier and associated voltage-controlled-amplifier (VCA) dynamics controller (compressor) ensures that mic input audio quality is preserved while minimizing the chance of signal overload. The user can monitor the Dante audio inputs on either the headset output or the built-in, high-quality speaker. A modern class-D speaker amplifier IC is used for maximum fidelity.\u003c\/p\u003e\r\n\u003cp\u003eThe front panel includes eight RGB illuminated rotary controls which are used to control the level of the Dante signal sources. Two more rotary controls are used to mute\/un-mute and control the output level to the headset and speaker. Each illuminated control can show if signal is present on the associated audio channel or if the channel is muted. Eight illuminated pushbutton switches allow the user control of the eight Dante outputs as well as show the presence of a 20 kHz call signal.\u003c\/p\u003e\r\n\u003cp\u003eAll Model 348 operating parameters are configured using the STcontroller software application. Compatible with the Windows® operating system, the easy-to-use program allows a unit to be configured in just minutes. General features include adjustment of the microphone preamplifier gain, sidetone audio level and activity, and LED intensity. The real power of the Model 348 is in its ability to be configured for a combination of intercom (talk\/listen), talent cueing (program audio w\/interrupt audio), REMI\/At-Home (talk w\/tone signaling), or general audio monitoring applications. Each of the eight channels can be independently configured, allowing support for contemporary applications where needs are never \"standard.\"\u003c\/p\u003e\r\n\u003cp\u003eWhen the Model 348 is combined with other Dante-supporting products from Studio Technologies, a wide range of intercom, talent cueing, and audio monitoring applications can be supported. These devices include intercom and listen-only user beltpacks, announcer's consoles, and Dante-to-analog party-line (PL) interfaces. And by utilizing the Model 5422 Dante Intercom Audio Engine it's a simple matter to create customized PL and private point-to-point intercom circuits or talent cue (IFB) channels. In all cases users can expect the audio quality will be excellent and features simple to operate.\u003c\/p\u003e\r\n\u003cp\u003eThe Model 348's main application firmware can be udpated using the USB port on the back of the unit; the Dante firmware can be updated via Ethernet.\u003c\/p\u003e\r\n\u003cp\u003eThe compact enclosure is intended for use on desktops or other flat surfaces. Overall dimensions are approximately 6.5 inches wide (16.5 cm), 2.5 inches high (6.4 cm), and 4.6 inches deep (11.7 cm) and weighs approximately 1.8 pounds (0.8 kg).\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":22244824809532,"sku":"1574963","price":1845.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_131d2cd9-eba7-4063-a8c7-801009e0eadb.jpg?v=1761239205"},{"product_id":"telos-2001-00528-000-infinity-link-ip-intercom-interface-8-codec-gateway","title":"Telos 2001-00528-000 Infinity Link IP Intercom Interface (8-Codec Gateway)","description":"\u003cp\u003eTelos Infinity Link enables Infinity systems in remote locations to connect to one another using an embedded, versatile, speech-optimized OPUS codec, over the public internet or private infrastructure.\u003c\/p\u003e \r\n\u003cp\u003eTelos Infinity Link is available in the form of software licenses that can be added to any host Infinity Panel or Beltpack hardware, or by way of a dedicated higher-density 1RU hardware gateway.\u003c\/p\u003e \r\n\u003cp\u003eInfinity Link Gateway supports either eight or sixteen bi-directional codecs running on a dedicated 1RU hardware platform, making it ideal for higher-density applications. Infinity Link Gateway features dual redundant internal power supplies and dual Gigabit Ethernet ports.\u003c\/p\u003e \r\n\u003cp\u003eOnce connected, the resulting Livewire+ AES67 streams from the remote locations appear as sources and destinations within the Telos Infinity Dashboard software and behave just like local networked audio sources, providing the ultimate in flexibility.\u003c\/p\u003e","brand":"Telos","offers":[{"title":"Default Title","offer_id":31437131579452,"sku":"1666135","price":4136.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_862ecf1d-0400-43fe-8d92-694b8827073c.jpg?v=1765021950"},{"product_id":"telos-2001-00534-000-infinity-link-ip-intercom-interface-16-codec-gateway","title":"Telos 2001-00534-000 Infinity Link IP Intercom Interface (16-Codec Gateway)","description":"\u003cp\u003eTelos Infinity Link enables Infinity systems in remote locations to connect to one another using an embedded, versatile, speech-optimized OPUS codec, over the public internet or private infrastructure.\u003c\/p\u003e \r\n\u003cp\u003eTelos Infinity Link is available in the form of software licenses that can be added to any host Infinity Panel or Beltpack hardware, or by way of a dedicated higher-density 1RU hardware gateway.\u003c\/p\u003e \r\n\u003cp\u003eInfinity Link Gateway supports either eight or sixteen bi-directional codecs running on a dedicated 1RU hardware platform, making it ideal for higher-density applications. Infinity Link Gateway features dual redundant internal power supplies and dual Gigabit Ethernet ports.\u003c\/p\u003e \r\n\u003cp\u003eOnce connected, the resulting Livewire+ AES67 streams from the remote locations appear as sources and destinations within the Telos Infinity Dashboard software and behave just like local networked audio sources, providing the ultimate in flexibility.\u003c\/p\u003e","brand":"Telos","offers":[{"title":"Default Title","offer_id":31437131612220,"sku":"1666136","price":5846.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_bbb4cd86-ce14-4cec-9660-687761359983.jpg?v=1765010285"},{"product_id":"glensound-beatrice-d16-16-channel-desktop-intercom-station-3-pin-xlr-female","title":"Glensound Beatrice D16 - 16-Channel Desktop Intercom Station (3-Pin XLR Female)","description":"\u003cp\u003eThe Glensound BEATRICE D16 is a versatile and fully featured 16 channel desktop intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.\u003c\/p\u003e\r\n\u003cp\u003eIt is part of the Beatrice intercom system that utilises the reliable and proven Dante® network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks.  It is also AES67 compliant. As such the BEATRICE D16 is fully compatible with other manufacturers’ equipment using the Dante® and\/ or AES67 protocols.\u003c\/p\u003e\r\n\u003cp\u003eThis sixteen channel desktop intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e16 Channels Of Intercom\u003c\/strong\u003e\u003cbr\u003e\r\nOne single user connected to the unit can listen to and communicate with 16 separate locations on the network. Depending upon how the Dante network has been routed the incoming audio circuits and outgoing circuits can be different locations.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDante® Routing and Partyline\u003c\/strong\u003e\u003cbr\u003e\r\n  Audio routing to\/ from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 16 channels). Therefore we’ve included an inbuilt fixed ratio 11 input 11 output mixer matrix with inputs and outputs connected directly to the Dante® \/ AES67 network which allows for setting up partyline and group circuits.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOnboard Mic and External Mic Input\u003c\/strong\u003e\u003cbr\u003e\r\n  A good quality, clear sounding microphone amplifier, designed for communication purposes, is fitted which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. This microphone amp has two microphone sources, either the inbuilt front panel mounted electret capsule which provides good voice intelligibility from normal working distances, or a balanced XLR input for connecting external gooseneck microphones. Twelve Volt Phantom power is also available and can be turned on\/ off as required via an internal link.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHigh Output Intelligible Loudspeaker\u003c\/strong\u003e\u003cbr\u003e\r\n  What’s the point of an intercom unit if the onboard speaker is so cheap that you can’t understand what is being said to you? We tried many different drive units before settling on the one used in the Beatrice D16. We chose it because it has a much cleaner sound and better frequency response for vocals.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMains or PoE Powered\u003c\/strong\u003e\u003cbr\u003e\r\n  An inbuilt wide range switch mode mains power supply is fitted for powering the Beatrice D16. It is terminated with a standard IEC plug, making it easy to plug in wherever you are in the World. \u003c\/p\u003e\r\n\u003cp\u003eThe unit can also be powered via the Ethernet cable by standard PoE (Power over Ethernet) on either of the copper Ethernet ports. The PoE power can be supplied by an external PoE switch or a midspan power injector.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRedundant Twin Copper and Twin Fibre Ethernet Interface\u003c\/strong\u003e\u003cbr\u003e\r\n  When ultra reliable communications is needed for the utmost important jobs, glitch free redundant network circuits can be set up using the primary and secondary Dante network ports.\u003c\/p\u003e\r\n\u003cp\u003eThere are 2 copper Ethernet ports on RJ45s and also 2 fibre Ethernet ports presented as SFP slots (SFP modules not included). Redundant networks can be set up across any of these ports. These ports can also be setup as a network switch.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eGPIO\u003c\/strong\u003e\u003cbr\u003e\r\n  A solid state relay output is provided and is triggered when any speak key is on (useful for dimming external loudspeakers or red light controls).\u003cbr\u003e\r\n  In total there are 12 loop closure inputs. 10 of these control the first 8 talk keys and talk to group and talk to all.\u003cbr\u003e\r\nThe other 2 loop closure inputs provide internal and external LS cuts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIFB\/ AUX Sources\u003c\/strong\u003e\u003cbr\u003e\r\n  Four different IFB\/ Aux audio sources are received from the Dante network. Each of the four sources is associated with four outgoing talkback channels. If audio is routed to the(se) IFB\/ Aux source(s) in the network then they are mixed in with their associated outgoing talkback channel circuit. \u003cbr\u003e\r\n  If a talkback key is on then the associated IFB\/ Aux source is ducked by 20dB. If the talkback is not on then the IFB\/ Aux source is routed to the channel's output with unity gain.\u003c\/p\u003e\r\n\u003cp\u003eIFB\/ Aux sources are very useful for distributing programme audio around an intercom setup whilst the ducking facility allows talkback to be heard over it.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMicrophone Level Meter\u003c\/strong\u003e\u003cbr\u003e\r\nAn eight LED front panel multipurpose indicator is used to indicate the outgoing microphone level.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eChannel Input and Output Gain Controls\u003c\/strong\u003e\u003cbr\u003e\r\nFor maximum flexibility gain can be applied to incoming audio signals and outgoing signals separately. A row of LEDs indicate the current gain setting when a channel's input or output is being adjusted.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMonitor\u003c\/strong\u003e\u003cbr\u003e\r\n  All incoming talkback channels are mixed together to the headphones\/ loudspeakers.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePresence Indication\u003c\/strong\u003e\u003cbr\u003e\r\n  Front panel LEDs located next to the talk switches are used to indicate the presence of incoming audio on that channel. When audio is detected on the channel the LED is illuminated, the LED then stays on for a short period after the incoming audio stops to help the operator identify who has been talking to them.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpeak To All and Speak To Group\u003c\/strong\u003e\u003cbr\u003e\r\n  Two useful front panel controls are fitted. When pressed, the ‘Speak To All’ button will enable the operator to talk to all the outputs simultaneously and the ‘Speak To Group’ button allows the operator to talk to an easily assignable set of outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpeaker Output\u003c\/strong\u003e\u003cbr\u003e\r\n  As well as the front panel internal loudspeaker a balanced analogue output is provided for connecting to an external powered loudspeaker.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMixer Matrix For Partyline\u003c\/strong\u003e\u003cbr\u003e\r\n  For setting up simple groups and partyline circuits that could not be achieved via Dante® controller or your AES67 router, an inbuilt fixed ratio mixer is supplied. It has 11 audio inputs direct from the network and 11 mix outputs to the network.\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":32351098961980,"sku":"1711160","price":2927.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_37246313-e43d-43f7-a920-a6652b8a8ba8.jpg?v=1763551316"},{"product_id":"glensound-beatrice-r16-16-channel-dante-aes67-intercom-station-3-pin-xlr-female","title":"Glensound Beatrice R16 - 16-Channel Dante \/ AES67 Intercom Station (3-Pin XLR Female)","description":"\u003cp\u003eThe Glensound BEATRICE R16 is a versatile and fully featured 16 channel rackmount intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.\u003c\/p\u003e\r\n\u003cp\u003eIt is part of our Beatrice intercom system that utilises the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks.  It is also AES67 compliant. As such the BEATRICE R16 is fully compatible with other manufacturers’ equipment using the Dante and\/ or AES67 protocols.\u003c\/p\u003e\r\n\u003cp\u003eThis 1RU rackmount intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e16 Channels Of Intercom\u003c\/strong\u003e\u003cbr\u003e\r\n  One single user connected to the unit can listen to and communicate with 16 separate locations on the network. Depending upon how the Dante network has been routed, the incoming audio circuits and outgoing circuits can be different locations.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eConfigurable Speak Switches\u003c\/strong\u003e\u003cbr\u003e\r\n  Each channels' speak switch can be user defined to operate to your preference. The options are: Momentary, Latching or Intelligent Lever Key.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDante® Routing and Partyline\u003c\/strong\u003e\u003cbr\u003e\r\n  Audio routing to\/ from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 16 channels). Therefore we’ve included an inbuilt fixed ratio 11 input 11 output mixer matrix with inputs and outputs connected directly to the Dante \/ AES67 network which allows for setting up partyline and group circuits.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOnboard Mic and External Mic Input\u003c\/strong\u003e\u003cbr\u003e\r\n  A good quality, clear sounding microphone amplifier, designed for communication purposes, is fitted which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. This microphone amp has two microphone sources, either the inbuilt front panel mounted electret capsule which provides good voice intelligibility from normal working distances, or a balanced XLR input for connecting external gooseneck microphones. Twelve Volt Phantom power is also available and can be turned on\/ off as required via an internal link.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHigh Output Intelligible Loudspeaker\u003c\/strong\u003e\u003cbr\u003e\r\n  What’s the point of an intercom unit if the onboard speaker is so cheap that you can’t understand what is being said to you? We tried hundreds of different drive units before settling on the one used in the Beatrice R16. We chose it because it had a much cleaner sound and better frequency response for vocals than any other speaker on the market that would fit in a 1RU subrack.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMains or PoE Powered\u003c\/strong\u003e\u003cbr\u003e\r\n  An inbuilt wide range switch mode mains power supply is fitted for powering the Beatrice R16. It is terminated with a standard IEC plug, making it easy to plug in wherever you are in the World.\u003c\/p\u003e\r\n\u003cp\u003eThe unit can also be powered via the Ethernet cable by standard PoE (Power over Ethernet) on either of the copper Ethernet ports. The PoE power can be supplied by an external PoE switch or a midspan power injector.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRedundant Twin Copper and Twin Fibre Ethernet Interface\u003c\/strong\u003e\u003cbr\u003e\r\n  When ultra reliable communications is needed for the utmost important jobs, glitch free redundant network circuits can be set up using the primary and secondary Dante network ports.\u003cbr\u003e\r\n  There are 2 copper Ethernet ports on RJ45s and also 2 fibre Ethernet ports presented as SFP slots (SFP modules not included). Redundant networks can be set up across any of these ports. These ports can also be set up as a network switch.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eGPIO\u003c\/strong\u003e\u003cbr\u003e\r\n  A solid state relay output is provided and is triggered when any speak key is on (useful for dimming external loudspeakers or red light controls).\u003cbr\u003e\r\n  In total there are 12 loop closure inputs. 10 of these control the first 8 talk keys and talk to group and talk to all.\u003cbr\u003e\r\nThe other 2 loop closure inputs provide internal and external LS cuts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIFB\/ AUX Sources\u003c\/strong\u003e\u003cbr\u003e\r\n  Four different IFB\/ Aux audio sources are received from the Dante network. Each of the four sources is associated with four outgoing talkback channels. If audio is routed to the(se) IFB\/ Aux sources in the network then they are mixed in with their associated outgoing talkback channel circuit.\u003cbr\u003e\r\n  If a talkback key is on then the associated IFB\/ Aux source is ducked by a user definable amount.  If the talkback is not on then the IFB\/ Aux source is routed to the channels' output with unity gain.\u003cbr\u003e\r\nIFB\/ Aux sources are very useful for distributing programme audio around an intercom setup whilst the ducking facility allows talkback to be heard over it.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMicrophone Level Meter\u003c\/strong\u003e\u003cbr\u003e\r\nAn eight LED front panel multipurpose indicator is used to indicate the outgoing microphone level.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eChannel Input and Output Gain Controls\u003c\/strong\u003e\u003cbr\u003e\r\nFor maximum flexibility, gain can be applied to incoming audio signals and outgoing signals separately. A row of LEDs indicate the current gain setting when a channels input or output is being adjusted.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMonitor\u003c\/strong\u003e\u003cbr\u003e\r\nAll incomming talkback channels are mixed together to the headphones\/ loudspeakers.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePresence Indication\u003c\/strong\u003e\u003cbr\u003e\r\nFront panel LEDs located next to the talk switches are used to indicate the presence of incoming audio on that channel. When audio is detected on the channel the LED is illuminated.  The LED then stays on for a short period after the incoming audio stops to help the operator identify who has been talking to them.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4-Wire Connectivity\u003c\/strong\u003e\u003cbr\u003e\r\nTwo traditional analogue 4-wire circuits can be connected to two of the R16's intercom channels by utilising the versatile analogue inputs and outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpeak To All and Speak To Group\u003c\/strong\u003e\u003cbr\u003e\r\nTwo useful front panel controls are fitted. When pressed, the ‘Speak To All’ button will enable the operator to talk to all the outputs simultaneously and the ‘Speak To Group’ button allows the operator to talk to an easily assignable set of outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpeaker Output\u003c\/strong\u003e\u003cbr\u003e\r\nAs well as the front panel internal loudspeaker a balanced analogue output is provided for connecting to an external powered loudspeaker.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLocal Input and Output Circuits\u003c\/strong\u003e\u003cbr\u003e\r\n  For increased versatility there are 2 local balanced analogue audio inputs and 2 local balanced analogue outputs.\u003cbr\u003e\r\n  The inputs are routed directly to two output channels on the Dante\/ AES67 network.\u003cbr\u003e\r\n  The outputs are fed directly from two input channels from the Dante\/ AES67 network.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMixer Matrix For Partyline\u003c\/strong\u003e\u003cbr\u003e\r\n  For setting up simple groups and partyline circuits that could not be achieved via Dante controller or your AES67 router, an inbuilt fixed ratio mixer is supplied. It has 11 audio inputs direct from the network and 11 mix outputs to the network.\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":32351304908860,"sku":"1711161","price":2927.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_671efd6a-52bd-45e2-91d3-d79125b4d83f.jpg?v=1763544087"},{"product_id":"radio-active-designs-uv-1g-vhf-wireless-intercom-base-station-6-beltpack-xlr4m","title":"Radio Active Designs UV-1G VHF Wireless Intercom Base Station (6 Beltpack \/ XLR4M)","description":"\u003cp\u003eRadio Active Designs has introduced the production community's first ever Enhanced Narrow Band™ wireless intercom system.\u003cbr\u003e\r\n\u003cbr\u003e\r\nEnhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e\r\n\u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e\r\n\u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e\r\n\u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e\r\n\u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e\r\n\u003cli\u003eInternal belt pack antennas\u003c\/li\u003e\r\n\u003cli\u003eFeed hundreds of belt packs from on antenna\u003c\/li\u003e\r\n\u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32398193688636,"sku":"1626708","price":14695.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_44cb58c4-ad93-4b71-8034-d4921d693061.jpg?v=1761239364"},{"product_id":"radio-active-designs-uv-1g-vhf-wireless-intercom-base-station-6-beltpack-xlr4f","title":"Radio Active Designs UV-1G VHF Wireless Intercom Base Station (6 Beltpack \/ XLR4F)","description":"\u003cp\u003eRadio Active Designs has introduced the production community's first ever Enhanced Narrow Band™ wireless intercom system.\u003cbr\u003e\r\n\u003cbr\u003e\r\nEnhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e\r\n\u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e\r\n\u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e\r\n\u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e\r\n\u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e\r\n\u003cli\u003eInternal belt pack antennas\u003c\/li\u003e\r\n\u003cli\u003eFeed hundreds of belt packs from on antenna\u003c\/li\u003e\r\n\u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32398193721404,"sku":"1626709","price":14695.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_154cbc82-56ee-4cdb-85bc-fd6464ce0047.jpg?v=1761232763"},{"product_id":"radio-active-designs-uv-1g-vhf-wireless-intercom-base-station-6-beltpack-xlr5m","title":"Radio Active Designs UV-1G VHF Wireless Intercom Base Station (6 Beltpack \/ XLR5M)","description":"\u003cp\u003eRadio Active Designs has introduced the production community's first ever Enhanced Narrow Band™ wireless intercom system.\u003cbr\u003e\r\n\u003cbr\u003e\r\nEnhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e\r\n\u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e\r\n\u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e\r\n\u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e\r\n\u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e\r\n\u003cli\u003eInternal belt pack antennas\u003c\/li\u003e\r\n\u003cli\u003eFeed hundreds of belt packs from on antenna\u003c\/li\u003e\r\n\u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32398193754172,"sku":"1626710","price":14695.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_ca5510d9-539c-4bc1-912b-200a7f88fef8.jpg?v=1761239364"},{"product_id":"radio-active-designs-uv-1g-vhf-wireless-intercom-base-station-4-beltpack-xlr4m","title":"Radio Active Designs UV-1G VHF Wireless Intercom Base Station (4 Beltpack \/ XLR4M)","description":"\u003cp\u003eRadio Active Designs has introduced the production community's first ever Enhanced Narrow Band™ wireless intercom system.\u003cbr\u003e\r\n\u003cbr\u003e\r\nEnhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e\r\n\u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e\r\n\u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e\r\n\u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e\r\n\u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e\r\n\u003cli\u003eInternal belt pack antennas\u003c\/li\u003e\r\n\u003cli\u003eFeed hundreds of belt packs from on antenna\u003c\/li\u003e\r\n\u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32398193786940,"sku":"1626711","price":13015.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_9920de9f-4272-4962-8585-09b2a3dfd991.jpg?v=1761226324"},{"product_id":"radio-active-designs-uv-1g-vhf-wireless-intercom-base-station-4-beltpack-xlr4f","title":"Radio Active Designs UV-1G VHF Wireless Intercom Base Station (4 Beltpack \/ XLR4F)","description":"\u003cp\u003eRadio Active Designs has introduced the production community's first ever Enhanced Narrow Band™ wireless intercom system.\u003cbr\u003e\r\n  \u003cbr\u003e\r\n  Enhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e\r\n  \u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e\r\n  \u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e\r\n  \u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e\r\n  \u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e\r\n  \u003cli\u003eInternal belt pack antennas\u003c\/li\u003e\r\n  \u003cli\u003eFeed hundreds of belt packs from on antenna\u003c\/li\u003e\r\n  \u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32398193819708,"sku":"1626712","price":13015.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_cfbb8776-20e4-46ba-8232-68883141ae24.jpg?v=1761226325"},{"product_id":"radio-active-designs-uv-1g-vhf-wireless-intercom-base-station-4-beltpack-xlr5m","title":"Radio Active Designs UV-1G VHF Wireless Intercom Base Station (4 Beltpack \/ XLR5M)","description":"\u003cp\u003eRadio Active Designs has introduced the production community's first ever Enhanced Narrow Band™ wireless intercom system.\u003cbr\u003e\r\n\u003cbr\u003e\r\nEnhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e\r\n\u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e\r\n\u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e\r\n\u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e\r\n\u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e\r\n\u003cli\u003eInternal belt pack antennas\u003c\/li\u003e\r\n\u003cli\u003eFeed hundreds of belt packs from on antenna\u003c\/li\u003e\r\n\u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32398193852476,"sku":"1626713","price":13015.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b0daf829-2bc4-4a81-be65-1598a19f7967.jpg?v=1761239365"},{"product_id":"radio-active-designs-uv-1g-4-channel-intercom-base-station-a4m-bnc-connectors-b-stock","title":"Radio Active Designs UV-1G 4-Channel Intercom Base Station (A4M\/BNC Connectors) - B-Stock","description":"\u003cp\u003eRadio Active Designs has introduced the production community’s first ever Enhanced Narrow Band™ wireless intercom system. Enhanced Narrow Band™ offers RF channels possessing an occupied bandwidth of a mere 25 kHz with the audio characteristics one would expect from a traditional FM system. The UV-1G also utilizes the relatively unused VHF range for all belt pack portable devices. This leaves more room for operation of other wireless devices, such as In-Ear Monitors and Wireless Microphones.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSystem Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEach channel has an occupied bandwidth of 25kHz\u003c\/li\u003e \u003cli\u003ePacks operate in the VHF Range which clears up valuable UHF spectrum for microphones and IEMs\u003c\/li\u003e \u003cli\u003eOperate 30 base stations with up to 180 belt packs in the same UHF footprint as a 1 base station 4 beltpack system that uses traditional FM technology\u003c\/li\u003e \u003cli\u003eUHF base to pack frequencies operate below allowed range of portable TVBDs\u003c\/li\u003e \u003cli\u003eUp to 6 belt packs to one base station\u003c\/li\u003e \u003cli\u003eInternal belt pack antennas\u003c\/li\u003e \u003cli\u003eAudio quality of traditional FM intercom systems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Radio Active Designs","offers":[{"title":"Default Title","offer_id":32438648078396,"sku":"1783865","price":4500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_eea7c86b-2849-42e6-89fa-da2f2150175a.jpg?v=1769941347"},{"product_id":"studio-technologies-model-5422a-01-dante-intercom-audio-engine","title":"Studio Technologies Model 5422A-01 Dante Intercom Audio Engine","description":"\u003cp\u003eThe Model 5422A Dante Intercom Audio Engine is a high-performance, cost-effective, and flexible solution for creating party-line (PL) intercom circuits when used with Dante-compatible products. These include the Studio Technologies range of 1-, 2- and 4-channel intercom beltpacks. The Model 5422A will also prove valuable in a variety of other general audio and broadcast-related mixing, IFB (talent cueing), and interfacing applications. The unit is suitable for use in fixed and mobile broadcast facilities, post-production studios, commercial and educational theater environments, and entertainment applications. Only power and Ethernet network connections are required for the Model 5422A to provide a powerful resource in a variety of Dante applications. The Model 5422A is available in two versions- one with 32 input and output channels and the other with 64 input and output channels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDante audio-over-IP technology with AES67 and DDM support\u003c\/li\u003e\n\u003cli\u003eCreates multiple virtual party-line (PL) intercom circuits\u003c\/li\u003e\n\u003cli\u003eSpecial audio functions including summing, IFB, and audio switching\u003c\/li\u003e\n\u003cli\u003eAuto Mix for enhanced audio performance\u003c\/li\u003e\n\u003cli\u003ePerfect for REMI\/At-Home production applications\u003c\/li\u003e\n\u003cli\u003eTwo versions available: one or two 32-channel audio engines\u003c\/li\u003e\n\u003cli\u003eThree Gigabit Ethernet interfaces support independent redundant Dante and management networks\u003c\/li\u003e\n\u003cli\u003eWebpage management and USB flash drive software updating\u003c\/li\u003e\n\u003cli\u003eAC mains and 12 volts DC powering\u003c\/li\u003e\n\u003cli\u003eLightweight enclosure, single rack-space (1U) mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003eThe Model 5422A provides three Gigabit Ethernet (\"GigE\") network interfaces, two which can support redundant Dante operation and a third for accessing the management menu system. To meet the latest interoperability standard the unit's Dante implementation meets the requirements of AES67. Support for the Dante Domain Manager™ (DDM) software application is also provided. An integral web server allows fast and flexible configuration of the unit's audio, networking, and Dante performance. Front-panel indicators, a graphics display, and pushbutton switches provide personnel with direct access to key operating parameters. The Model 5422A can be powered by 100-240 V, 50\/60 Hz mains or a source of 12 volts DC. The lightweight enclosure mounts in one space (1U) of a standard 19-inch rack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003cbr\u003eThe Model 5422A is compatible with many Dante-compliant devices including the extensive range of intercom beltpacks from Studio Technologies. These include the single-channel\/dual-listen Model 372A and Model 373A, the 2-channel Model 370A and Model 371A, and the 4-channel Model 374A. The Model 5422A will also function directly with other Dante-supporting devices such as the Model 348 Intercom Station and Model 391 Dante Alerting Unit. In addition, the Model 5422A can function with matrix intercom systems, audio consoles, and wireless intercom base stations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePro Audio Quality and Auto Mix\u003cbr\u003e\u003c\/strong\u003eThe Model 5422A supports 24-bit, 48 kHz sampling rate digital audio signals that interface using Dante. The unit's audio circuitry was designed to meet the demands of professional audio applications, far exceeding the sonic quality of \"typical\" intercom products. All audio processing is performed using high-speed 32-bit programmable logic. This ensures that the audio performance is excellent, providing the expected benefits of minimal distortion, low noise, high headroom, flat frequency response, and extremely low latency.\u003c\/p\u003e\u003cp\u003eThe Model 5422A's Auto Mix function utilizes a sophisticated FPGA-based algorithm to provide enhanced audio intelligibility. This feature is unique to party-line (PL) intercom applications and offers user's the opportunity to obtain the absolutely finest audio performance. Studio Technologies' is confident that the Model 5422A's Auto Mix capability will meet or exceed the automatic mixer performance of virtually all other hardware- or software-based devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo Versions\u003cbr\u003e\u003c\/strong\u003eTwo versions of the Model 5422A are available. The Model 5422A-01 provides one 32-channel audio engine. The Model 5422A-02 provides two 32-channel audio engines for a total of 64 input and output channels. The size and scope of a specific application will dictate which Model 5422A version is applicable. The term \"audio engine\" was selected to describe a set of audio input, processing, routing, and output resources that can be configured to support specific intercom, talent-cueing, and audio routing and control functions. Unlike general-purpose digital matrix devices, the Model 5422A is optimized to allow direct support for these special broadcast and general intercom applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGroup Configuration\u003cbr\u003e\u003c\/strong\u003eConfiguration choices select how each 32-channel audio engine is segmented, named, and optimized for how the associated audio signals are processed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGroup Size\u003cbr\u003e\u003c\/strong\u003eThe ability to segment a 32-channel audio engine into multiple groups allows efficient use of the Model 5422A's Dante channels. As all Dante intercom beltpacks are essentially 4-wire devices (having independent receiver (input) and transmitter (output) channels) \"virtual\" (simulated) party-line functionality must be created within the Model 5422A's audio engines. This requires that the maximum number of participants (users) on any one \"party-line\" be defined.\u003c\/p\u003e\u003cp\u003eThe 32 channels offered by an audio engine can be configured into what are called groups. Simple configuration choices in the Model 5422A's menu pages allow the number of groups and their sizes to be selected. Groups can range in size from 32 channels (a complete audio engine being used for a single group) to having just four channels. The size of a group will dictate how many devices and associated users can be part of any one party-line or how many channels will be impacted by a processing setting for a specific group. Ten choices allow a wide range of group configurations to be selected. The default setting for each audio engine is to have four 8-channel groups. This leads to the Model 5422A-01 having four 8-channel groups and the Model 5422A-02 having eight 8-channel groups. Refer to the Specifications section for a detailed list of the group sizes that are available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGroup Names\u003cbr\u003e\u003c\/strong\u003eEach group can be assigned a unique name. These names would typically reflect how the specific groups are going to be utilized. Names such as Camera PL, Lighting, Pyro, or Engineering would be typically used in broadcast-or live-event-oriented intercom applications. The configured names are automatically used by the Model 5422A's Dante Interface, providing clarity when routing Dante channels using applications such as Dante Controller. Each group name can be a combination of up to 13 alpha or numeric characters. Channel numbers are automatically appended to the entered names to provide identification of the specific channels within the Dante environment. A name of up to 13 additional characters can also be added to each specific channel, providing further details about an application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGroup Operating Modes\u003cbr\u003e\u003c\/strong\u003eWhile the primary application for the Model 5422A is to create party-line (PL) intercom circuits, each group can be independently configured from among seven operating modes: Party-Line w\/Auto Mix, Party-Line, Summing Bus w\/Auto Mix, Summing Bus, IFB, Audio Switching, and Pass-Thru.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eParty-Line\u003cbr\u003e\u003c\/strong\u003eWhen a group is set for party-line operation the Model 5422A's audio processing circuitry creates a series of independent \"mix-minus\" outputs, one for each channel in the group. These specialized outputs allow each intercom user assigned to that specific group (a \"party-line\") to hear all members of that group except for themselves. (This is the origin of the term mix-minus and indicates a mix of all sources but themselves.) By each user receiving a mix-minus signal precise control of each user's sidetone audio level and overall audio quality can be maintained. The Auto Mix function can be enabled for use with the Party-Line mode and will offer Model 5422A users with a level of audio performance that is unique among intercom applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSumming Bus\u003cbr\u003e\u003c\/strong\u003eWhen a group is configured for summing bus operation audio sources assigned to the group's input channels are mixed (summed or combined). The resulting mix is routed to all the output channels associated with that group. While essentially providing a \"unity gain\" mixer function, using the Model 5422A's web menu pages allows the level of each input and output channel can be adjusted over a ±20 dB range. The summing bus mode can be useful for general-purpose audio mixing applications where multiple Dante channels need to be combined. The Auto Mix function can also be enabled for use with the summing bus mode. This will allow a Model 5422A to be useful in applications well beyond broadcast intercom. This may prove especially useful in audio applications that need require combining many voice sources. Press conferences, sports interview configurations, and government meeting situations may all benefit from this capability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIFB\u003cbr\u003e\u003c\/strong\u003eThe IFB mode is specifically included for productions that utilize the Remote Integration (REMI) or At-Home model where production personnel are located physically apart from on-air talent. \"Interruptible foldback\" (IFB) talent cue signals, each typically created from a program audio source and a voice-only interrupt source, are critical for supporting the needs of on-air personnel. Creating these in a REMI environment can be challenging. However, by utilizing the Model 5422A's IFB capability this can become a simple matter. Each IFB function uses two Dante input channels (program audio and interrupt audio) and two Dante output channels (program with interrupt and program-only). Configuration choices allow the presence of interrupt audio to be recognized by voice-detect (VOX) or tone-detect (TOX) algorithms. Each will allow creation of excellent talent cueing \"feeds.\" However, TOX provides a unique operating scenario where an 18 kHz (nominal) tone, combined with interrupt audio, can reliably activate and deactivate an IFB function. In this way an IFB-active signal provided by way of a proprietary data link isn't required for fully \"pro\" IFB signals to be created. During interrupt activity the program audio can be attenuated (or fully muted) following a configurable parameter. A Model 5422A can have as few as two independent IFB functions by selecting a 4-channel group. Selecting a 32-channel group can provide 16 independent IFB functions. As such, using a Model 5422A-02 allows the creation of up to 32 independent IFB functions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAudio Switching\u003cbr\u003e\u003c\/strong\u003eWhen a group is configured for Audio Switching operation where an audio input source is routed will be controlled by way of a high-frequency tone. The control tone is connected to a separate Dante input, allowing full isolation between the input audio source and the control tone signal. An audio source is connected to a Dante receiver (input) channel and then routed to a designated Dante transmitter (output) channel when a control signal is not present. This is the \"normally active\" input-to-output path. When the Audio Switching function's tone-detect (TOX) resource recognizes the presence of a high-frequency control tone the audio input source is muted on the normally-active output and routed to the normally-inactive output. When the high-frequency control tone is no longer present the switching action is reversed.\u003c\/p\u003e\u003cp\u003eThe Audio Switching function that could be described as logically implementing a \"form-C\" relay or SPDT switch contact action. (Although the audio signal will only flow from the one input to the two outputs.) The switching action is always performed with no clicks, \"pops,\" or other audio artifacts added; full audio fidelity is preserved. The Audio Switching function can be useful for a wide range of applications. A single channel of audio can be controlled for broadcast applications with the audio source and control tone originating at separate locations. Devices such as the Studio Technologies' Model 348 Intercom Station can generate compatible audio control tones. Multiple Audio Switching functions can be easily configured to allow support for multi-channel applications. For example, a single control tone could be used to control audio signals passing through to a 16-, 24-, or 32-channel loudspeaker playback system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePass-Thru\u003cbr\u003e\u003c\/strong\u003eEach group can be independently selected to run in a special mode called Pass-Thru. This implements an audio function that routes each Dante input (receiver) channel directly to an associated Dante output (transmitter) channel. This simple but sophisticated function will allow any Dante signal to utilize the Model 5422A's capability to support up to 32 Dante flows. This can be useful as a \"flow expander\" when used in an application that includes Dante-compatible products that utilize Audinate's Ultimo™ integrated circuit. (Many products from Studio Technologies use Ultimo.) While an excellent cost-effective means of implementing Dante, using Ultimo has several limitations. The first is its ability to support only two transmitter and two receiver flows. Routing Dante signals through Model 5422A pass-thru channels can facilitate integration with applications that require additional flows.\u003c\/p\u003e\u003cp\u003ePass-thru can also be used as a simple means of adjusting the level of one or more Dante signals. Using the Model 5422A's web menu pages, the level of each input and output channel can be independently adjusted over a ±20 dB range. And with the unit's ability to support AES67 and the Dante Domain Manager (DDM) application, many specialized interfacing tasks can be accomplished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChannel Level Adjustment and Naming\u003cbr\u003e\u003c\/strong\u003eThe nominal level of each Dante input (receiver) channel and Dante output (transmitter) channel can be individually adjusted. This would apply to the 32 channels associated with the Model 5422A-01 and the 64 channels with the Model 5422A-02. The adjustment range is ±20 dB in 1-dB steps. This capability can be useful when using a Model 5422A to interface various pieces of equipment that may have different internal operating levels.\u003c\/p\u003e\u003cp\u003eThe Model 5422A includes extensive capabilities to allow the naming of Dante audio channels. This can help ensure that the specific configuration selected for a Model 5422A can be understood by other technical personnel. In this way changes to channel names won't require the use of the Dante Controller application although the naming convention are, of course, fully compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexible Networking Capability\u003cbr\u003e\u003c\/strong\u003eUsing the Dante Controller application program, the Model 5422A's three Gigabit Ethernet ports can be selected to operate in one of four modes: Switched, Redundant, Switched+Mgmt, and Redundant+Mgmt. This should allow virtually any desired networking implementation to be easily achieved.\u003c\/p\u003e\u003cp\u003eIn the Switched mode a single Ethernet connection to either of the Model 5422A's two Dante Ethernet ports will provide connectivity to the associated Dante network. The remaining Dante Ethernet port will provide Dante network \"loop-through\" capability and can be used to interface with another piece of Ethernet-connected equipment. The management Ethernet port will be used to access the Model 5422A's monitoring and configuration webpages.\u003c\/p\u003e\u003cp\u003eIn the Redundant mode two independent Ethernet connections are made to the Model 5422A's two Dante Ethernet ports, enabling Dante's redundant networking capability. Again, the management Ethernet port will be used to access the Model 5422A's monitoring and configuration webpages. Using either of these network modes allows separate network connections to be maintained for Dante audio and management purposes.\u003c\/p\u003e\u003cp\u003eIn the Switched+Mgmt mode a single Ethernet connection is used for both Dante audio functionality as well as providing access to the Model 5422A's management webpages. The remaining Dante Ethernet port will provide network \"loop-through\" capability and can be used to interface with another piece of Ethernet-connected equipment.\u003c\/p\u003e\u003cp\u003eIn the Redundant+Mgmt mode two Ethernet connections can be made to the Model 5422A's two Dante Ethernet ports. This will allow independent audio networking capability for redundant Dante applications. Access to the Model 5422A's management webpages will be made by way of the Ethernet connection made to the primary Dante Ethernet port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOperating Power\u003cbr\u003e\u003c\/strong\u003eThe Model 5422A allows an AC mains source of 100-240 V, 50\/60 Hz to be directly connected. It can also be powered using a 10-18 volts DC source that is connected via a broadcast-standard 4-pin XLR connector. If both AC and DC power sources are connected to a Model 5422A, the unit will be powered by the AC mains supply. Only if the AC mains source fails will a load be placed on the DC source. This allows a source of DC, typically a battery pack, to serve in a backup capacity. With this arrangement normal operation can continue even if AC mains power is lost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpdating \u0026amp; Future Capabilities\u003cbr\u003e\u003c\/strong\u003eThe Model 5422A was designed so that its capabilities can be enhanced in the future. A USB connector, located on the unit's back panel, allows the application and FPGA firmware (embedded software) to be updated using a USB flash drive. The Model 5422A uses Audinate's Brooklyn II interface module to implement Dante. The firmware in this module can easily be updated using the Dante Updater application that is included with the Dante Controller application. All software files and configuration parameters are stored in non-volatile memory.\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":37958852935864,"sku":"1843694","price":2395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_0604afea-cb7e-4488-902f-3606bd5fae94.jpg?v=1761233296"}],"url":"https:\/\/daleproaudio.com\/collections\/base-stations.oembed?page=6","provider":"Dale Pro Audio","version":"1.0","type":"link"}