Contact Our Expert Sales Team:

888-462-7828 Live Chat

Crown DCi 4|600DA DriveCore Install Power Amplifier with Dante

 
  • Dale #:

    CROW-DCI4600DA
  • Availability:

    In Stock
  • Available for immediate shipment or pick-up from our Jamaica, NY warehouse. In-store pick-up is available Monday through Friday 8:30 am to 5:30 pm.

Description

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi D... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

Features:

  • Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
  • Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
  • Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
  • Digital Signal Processing – DSP capabilities include the following:
    • LevelMAX Limiters
    • Input/Output EQ
    • Crossover
    • Delay
    • Matrix Router
    • Speaker Line Monitoring

More +

Product Specs

Channels 4
Power Output Rating 2Ω: 300W
4Ω: 600W
8Ω: 600W
70Vrms: 600W
100Vrms: 600W
Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB
Dante Input Signal to Noise Ratio (ref. rated power, 8ohm, 20Hz-20kHz) >108dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
Voltage Gain (at Maximum Level Setting) 34dB
Damping Factor (20Hz to100Hz) >1000
Input Impedance (nominal balanced, unbalanced) 10kΩ, 5kΩ
Maximum Input Level (Low Gain Mode) before Compression +20dBu
Load Impedance Stereo/Dual Mode 2Ω - 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M) 45
Required AC Mains (±10%) 100Vrms - 240Vrms ~50/60Hz
Power Connector 15A IEC
Width 19 in. (48.3 cm)
Height 3.5 in. (8.9 cm)
Depth 14.25 in. (35.63 cm)
Weight 20.1 lbs (9.12 kg)

More +

Shipping Rate Calculator

 

Also Popular