Contact Our Expert Sales Team:

888-462-7828 Live Chat

RDL TX-MX2R Installation Audio Mixer / Distribution Amplifier

 
  • Dale #:

    RDL-TXMX2R
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Please Note: requires PS-24AS Power Supply (sold separately)

Description

The TX-MX2R is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed either one or two unbalanced destinations.The input circuits are high-impedance, line-level (-10 dBV) and are each isolated from each other. Therefore the modu... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The TX-MX2R is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed either one or two unbalanced destinations.

The input circuits are high-impedance, line-level (-10 dBV) and are each isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. Each output from the TX-MX2R is a mono mix of the stereo signal. Normally, the gain trimmers are set to unity gain. If either channel is low, the gain of that channel may be adjusted up to 6 dB.The TX-MX2R may also be used to mix two separate sources into a single output. The mixing circuit in the module is an active summing amplifier.
    Features:
  • Mix 2 unbalanced mono signals
  • Combine stereo into mono
  • Gain trim for each input
  • Two active isolated outputs from the input signal (s)
  • Isolation between inputs
  • High-Quality unbalanced audio

The output driver provides two separate, identical output signals from the input signal or signals. This output distribution amplifier therefore allows the TX-MX2R to be used as a two-output audio distribution amplifier. If it is desired to distribute a single source to two destinations, one of the inputs may be left unused without any loss of performance.

More +

Product Specs

Inputs (2): -10 dBV
Input Impedance: 10 k
Noise: < -75 dB (referenced to -10 dBV)
THD+N: < 0.05% (0.01% typical)
Frequency Response: 25 Hz to 45 kHz (+/- 0.5 dB)
15 Hz to 70 kHz (+/- 1 dB)
Gain (per channel): Unity to +6 dB nominal (adjustable)
IMD: 0.01% typical
Outputs (2): 100 unbalanced, -10 dBV to drive low or high impedance unbalanced lines
Headroom: > 27 dB (24 Vdc supply)
> 18 dB (12 Vdc supply)
Power Requirement: GROUND-REFERENCED, 12 to 33 Vdc @ 10 mA
Ambient Operating Environment:0 degrees C to 55 degrees C

More +

Shipping Rate Calculator

 

Also Popular