Millennia TD1 Class "A" Microphone Preamp - Parametric EQ + Reamp Outs - B-Stock

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:MILL-TD1BSTK
Condition: B-Stock
This item was used in our demo room and is in excellent “A-Stock” condition.
Manual, handle, feet, and power cable are included. Ships in the original box.

Availability: In Stock

Available for immediate shipment and pick-up from our Jamaica, New York location. In-store pick-up is available Monday through Friday from 8:30 am to 5:30 pm
Free Shipping (Continental US)
  • Multiple Paths, One Goal: Total Sonic Realism

    Four distinct inputs can be optimized for any source, Instruments – Twin Topology DI channel; dual-triode 12AT7 vacuum tube or discrete FET solid state, Microphones – discrete solid state HV-3 microphone preamplifier, DAW or tape outputs – Discrete solid state line level amplifier, Guitar power amp outputs – Speaker Soak technology, Powerful yet musical tonal shading, Two bands of mastering-grade NSEQ-2 parametric Eq; 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q, Optimized DI input for any instrument with variable 470 k / 2 M / 10 M impedance, Nine outputs for unlimited functionality, Patented Re-Amp outputs with custom-designed magnetics emulate Les Paul and Strat pickups, Audiophile headphone output, Balanced and unbalanced monolithic outputs, Balanced and unbalanced discrete FET outputs, Microphone level output with large-geometry DIT-01 transformer: -3 dB 3 Hz – 300 kHz, Effortlessly musical performance at all dynamic levels, Input headroom >100 V, output headroom > 30 V, 100% effective hum removal with numerous ground lifts & isolations, Built for critical professional applications, Ultra-clean toroid power supply: internal sub-chassis, Gold connectors, OFC audio wiring, silver Teflon power wiring.
  • Preamplifiers and General
    Instrument / DI Input Amplifier Twin Topology®TUBE: Selected twin triode vacuum tube amplifier (200 V), SOLID STATE: Selected all discrete J-FET amplifier (50 V)
    THD + Noise
    20 Hz - 30 kHz (35 dB Gain)0.0005% typical mic / line, 0.03% typical vacuum tube
    Intermodulation Distortion0.0009% typical mic / line, 0.03% typical vacuum tube
    Frequency Response @ -3 dB points3 Hz to 300 kHz, typical. Varies with routing & topology
    Maximum Balanced Line Input Level +23 dBu (+43 dBu with Pad engaged or >110 Volts rms)
    Maximum DI Input Level (Both Tube & SS)+18 dBu (+26 dBu with Pad engaged or >15 Volts rms)
    Maximum Output Level+32 dBu active balanced outputs, +26 dBu unbal outputs
    Maximum System Gain45 dB standard (65 dB with optional HV-3 mic preamp)
    Input Impedance (DI)Switchable: 470 kilohms / 2 megohms / 10 megohms
    Noise (Mic) (60 dB gain)-128 dB EIN, 150 ohm source, -130 dB EIN common, source
    Noise (Line) (10 dB gain)-105 dBu
    Noise (DI) (10 dB gain)-90 dBu (solid state)
    Phase Error (EQ out)Less than +/- 5 degrees 50 Hz to 20 kHz
    Parametric Equalizer
    Maximum Boost and Cut +/– 15 dB (21 step detent
    “Q” RangeQ+ 0.4 to 4.0 sweepable
    Low Freq sweep
    Switch InPure Class-A Discrete J-FETs
    Hi Freq sweep
    Switch OutPure Class-A Triode Tubes
    Power Consumption35 watts maximum
    Power Requirements
    Selectable100-120, 200-240 V ac, 50/60 Hz
    Dimensions/Shipping Weight8.5” W x 3.5” H x 13.0” D, 20 lbs.
  • Shipping rates calculator