{"title":"Microphone Stands","description":"\u003ch2\u003eHelping You Put Microphones Wherever You Need Them.\u003c\/h2\u003e\n\u003cp\u003eDale Pro Audio's vast selection of microphone stands will help you get your mics wherever you need them. You will find all kinds of stands for the floor, for desk or table tops, boom arms for broadcast, and even boom poles for location sound.\u003c\/p\u003e\n\u003cp\u003eWe carry reliable and trustworthy brands such as K+M, Triad-Orbit, Yellowtec, K-Tek, Ultimate Support, AtlasIED, and more.\u003c\/p\u003e","products":[{"product_id":"yellowtec-yt3201-m-ka-microphone-arm-m-aluminum-open-cable-ends","title":"Yellowtec YT3201 - m!ka Microphone Arm M (Aluminum \/ Open Cable Ends)","description":"\u003cp\u003eMade of durable silk-mat anodized aluminum, the m!ka Microphone Arm M aluminum is designed to hold microphones with a weight up to 2kg (4.5lbs). As the golden ratio out of Yellowtec's range of m!ka Mic Arms, the M-size Microphone Arm is the perfect allrounder in terms of microphone arrangements. The arm is a good choice to shape working desks or interviewing areas where the distance between arm and speaker is not higher than 31\" (78.7cm).\u003c\/p\u003e\u003cp\u003eBy adjusting only a few knurled screws you can make sure Yellowtec's m!ka Microphone Arm securely fastens your mic according to its weight, in any position you pull it to.\u003c\/p\u003e\u003cp\u003eBe it a switch in seats or a recording setup which is used by different persons, the m!ka Mic Arm allows you to customize your mic's position within seconds. Fully compatible with the whole m!ka system, you can take full advantage of the given variety of mounting options to tailor your setup to your individual needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupports microphones weighing up to 2kg (4.5lbs)\u003c\/li\u003e\n\u003cli\u003e5\/8\" thread to attach your microphone\u003c\/li\u003e\n\u003cli\u003eAdjustable friction joints\u003c\/li\u003e\n\u003cli\u003eWiring concealed by tubes and joints\u003c\/li\u003e\n\u003cli\u003eOpen-end cable tails (without XLRs)\u003c\/li\u003e\n\u003cli\u003eXLR-3 mounting connector can be ordered separately\u003c\/li\u003e\n\u003cli\u003eSturdy tube construction\u003c\/li\u003e\n\u003cli\u003eMade of durable, silk-mat anodized aluminum\u003c\/li\u003e\n\u003cli\u003eFully compatible with the whole m!ka Mounting System range\u003c\/li\u003e\n\u003cli\u003eVarious mounting options: Table \/ wall \/ pole mounting\u003c\/li\u003e\n\u003cli\u003eRenowned German craftsmanship\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yellowtec","offers":[{"title":"Default Title","offer_id":37748457297,"sku":"635529","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b7c02ee9-11f9-4b8c-84bc-be606c7c1854.jpg?v=1767787632"},{"product_id":"yellowtec-yt3211-m-ka-bushing-stainless-steel","title":"Yellowtec YT3211 - m!ka Bushing - Stainless Steel","description":"\u003cp\u003eThe Bushing is one of the plug-in options to mount m!ka arms. In combination with the MMS Sting it also serves as a fixation to mount m!ka Poles to desks. Use the stainless steel Bushing to fix your m!ka Mic Arm or m!ka MMS System Pole to your desk by drilling a hole and fastening its position with a nut underneath the desk.\u003c\/p\u003e\u003cp\u003eThe Bushing fits every table with a panel thickness up to 45mm. Due to the small visible part of the Bushing on top of the desk, it is the first choice m!ka mounting option for furniture integration. You can use numerous Bushings in different parts of your desk as variable mounting points to temporarily move your arms to and simply mount them via plug-in within seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug-in mount for m!ka arms and m!ka Poles\u003c\/li\u003e\n\u003cli\u003eTo mount m!ka Poles to desks\u003c\/li\u003e\n\u003cli\u003eTo mount m!ka arms to desks\u003c\/li\u003e\n\u003cli\u003eSuitable as variable mounting point\u003c\/li\u003e\n\u003cli\u003eSuitable for panel thickness up to max 45mm\u003c\/li\u003e\n\u003cli\u003eCompatible with m!ka Mic Arms\u003c\/li\u003e\n\u003cli\u003eCompatible with m!ka Studiolight\u003c\/li\u003e\n\u003cli\u003eCompatible with m!ka EasyLift Monitor Arms\u003c\/li\u003e\n\u003cli\u003eSturdy stainless-steel construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yellowtec","offers":[{"title":"Default Title","offer_id":37748462097,"sku":"635552","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_26145e9b-35fd-40c1-8fe3-305d075c8ffe.jpg?v=1767787632"},{"product_id":"yellowtec-yt3207-m-ka-microphone-arm-for-tv-aluminum-open-cable-ends","title":"Yellowtec YT3207 - m!ka Microphone Arm for TV (Aluminum \/ Open Cable Ends)","description":"\u003cp\u003eYellowtec's m!ka Microphone Arm TV is created for video application. It is developed to be used for TV, vlogs and radio stations who provide video streams of their studio environment. Thanks to the possibility to place the arm completely below the camera's field of view, faces will be fully visible for your audience and for your interview partner. This makes the m!ka Mic Arm TV the perfect choice for anyone who is involved in TV, video channels, and visual radio.\u003c\/p\u003e\u003cp\u003eBy adjusting only a few knurled screws you can make sure Yellowtec's m!ka Microphone Arm securely fastens your mic according to its weight, in any position you pull it to.\u003c\/p\u003e\u003cp\u003eBe it a switch in seats or a recording setup which is used by different persons, the m!ka Mic Arm allows you to customize your mic's position within seconds. Fully compatible with the whole m!ka Mounting System, you can take full advantage of the given variety of mounting options to tailor your setup to your individual needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupports microphones weighing up to 2kg (4.5lbs)\u003c\/li\u003e\n\u003cli\u003e5\/8\" thread to attach your microphone\u003c\/li\u003e\n\u003cli\u003eDeveloped to use microphones without any restrctions in sight\u003c\/li\u003e\n\u003cli\u003eAdjustable friction joints\u003c\/li\u003e\n\u003cli\u003eWiring concealed by tubes and joints\u003c\/li\u003e\n\u003cli\u003eOpen-end cable tails (without XLRs)\u003c\/li\u003e\n\u003cli\u003eXLR-3 mounting connector can be ordered separately\u003c\/li\u003e\n\u003cli\u003eSturdy tube construction\u003c\/li\u003e\n\u003cli\u003eMade of durable, silk-mat anodized aluminum\u003c\/li\u003e\n\u003cli\u003eFully compatible with the whole m!ka Mounting System range\u003c\/li\u003e\n\u003cli\u003eVarious mounting options\u003c\/li\u003e\n\u003cli\u003eRenowned German craftsmanship\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yellowtec","offers":[{"title":"Default Title","offer_id":37748485521,"sku":"864930","price":559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_ac4f3051-907c-4f22-b7f1-e46a62e68703.jpg?v=1767786684"},{"product_id":"yellowtec-yt3208-m-ka-on-air-microphone-arm-for-tv-black-open-cable-ends","title":"Yellowtec YT3208 - m!ka On-Air Microphone Arm for TV (Black \/ Open Cable Ends)","description":"\u003cp\u003eYellowtec's m!ka On Air Microphone Arm TV is created for video application. It is developed to be used for TV, vlogs and radio stations who provide video streams of their studio environment. Thanks to the possibility to place the arm completely below the camera's field of view, faces will be fully visible for your audience and for your interview partner. This makes the On Air Microphone Arm TV the perfect choice for anyone who is involved in TV, video channels, and visual radio.\u003c\/p\u003e\u003cp\u003eEquipped with a bright dual color LED On Air indicator, the black colored On Air Microphone Arm TV is not only adjustable to your microphone's weight and puts your mic into the perfect position. It also allows users to signalize multiple statuses.\u003c\/p\u003e\u003cp\u003eThe dual color on air indicator is characterized as a smaller version of Yellowtec's litt Signaling Device which is integrated into the corner hinge of the arm. Thus, it provides m!ka On Air Mic Arms with litt's incomparable and Red Dot Award-winning CleanVision® lighting characteristics. Using the indicator's respective colors red and white, you can signalize statuses such as On Air or Mic Ready. Just reverse the polarity of the drive voltage and toggle between red and white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupports microphones weighing up to 2kg (4.5lbs)\u003c\/li\u003e\n\u003cli\u003e5\/8\" thread to attach your microphone\u003c\/li\u003e\n\u003cli\u003eDeveloped to use microphones without any restrctions in sight\u003c\/li\u003e\n\u003cli\u003eDual Color litt CleanVision® On Air Indicator (red\/white)\u003c\/li\u003e\n\u003cli\u003eAdjustable friction joints\u003c\/li\u003e\n\u003cli\u003eWiring concealed by tubes and joints\u003c\/li\u003e\n\u003cli\u003eOpen-end cable tails (without XLRs)\u003c\/li\u003e\n\u003cli\u003eSturdy tube construction\u003c\/li\u003e\n\u003cli\u003eMade of durable, silk-mat anodized aluminum\u003c\/li\u003e\n\u003cli\u003eFully compatible with the whole m!ka Mounting System range\u003c\/li\u003e\n\u003cli\u003eVarious mounting options\u003c\/li\u003e\n\u003cli\u003eRenowned German craftsmanship\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yellowtec","offers":[{"title":"Default Title","offer_id":37748485649,"sku":"864931","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_5cdf34de-30a5-44d6-90fc-9fcfc1ef718c.jpg?v=1767777761"},{"product_id":"yellowtec-yt3601-m-ka-microphone-arm-black-open-cable-ends","title":"Yellowtec YT3601 - m!ka Microphone Arm (Black \/ Open Cable Ends)","description":"\u003cp\u003eMade of durable silk-mat anodized aluminum, the m!ka Microphone Arm M aluminum is designed to hold microphones with a weight up to 2kg (4.5lbs). As the golden ratio out of Yellowtec's range of m!ka Mic Arms, the M-size Microphone Arm is the perfect allrounder in terms of microphone arrangements. The arm is a good choice to shape working desks or interviewing areas where the distance between arm and speaker is not higher than 31\" (78.7cm).\u003c\/p\u003e\u003cp\u003eBy adjusting only a few knurled screws you can make sure Yellowtec's m!ka Microphone Arm securely fastens your mic according to its weight, in any position you pull it to.\u003c\/p\u003e\u003cp\u003eBe it a switch in seats or a recording setup which is used by different persons, the m!ka Mic Arm allows you to customize your mic's position within seconds. Fully compatible with the whole m!ka system, you can take full advantage of the given variety of mounting options to tailor your setup to your individual needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupports microphones weighing up to 2kg (4.5lbs)\u003c\/li\u003e\n\u003cli\u003e5\/8\" thread to attach your microphone\u003c\/li\u003e\n\u003cli\u003eAdjustable friction joints\u003c\/li\u003e\n\u003cli\u003eWiring concealed by tubes and joints\u003c\/li\u003e\n\u003cli\u003eOpen-end cable tails (without XLRs)\u003c\/li\u003e\n\u003cli\u003eXLR-3 mounting connector can be ordered separately\u003c\/li\u003e\n\u003cli\u003eSturdy tube construction\u003c\/li\u003e\n\u003cli\u003eMade of durable, silk-mat anodized aluminum\u003c\/li\u003e\n\u003cli\u003eFully compatible with the whole m!ka Mounting System range\u003c\/li\u003e\n\u003cli\u003eVarious mounting options: Table \/ wall \/ pole mounting\u003c\/li\u003e\n\u003cli\u003eRenowned German craftsmanship\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yellowtec","offers":[{"title":"Default Title","offer_id":37748497617,"sku":"1160833","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_65f75b65-54d5-487a-b259-55018f489b23.jpg?v=1767786685"},{"product_id":"ultimate-support-mc-05b-round-base-microphone-stand","title":"Ultimate Support MC-05B Round Base Microphone Stand","description":"\u003cp\u003eWeighted base mic stand.Reliable, heavy-duty stand with that extra touch. \u003c\/p\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eQuick-release clutch\u003c\/li\u003e\n\u003cli\u003eSmoothly raise or lower height withreliable clutch.\u003c\/li\u003e\n\u003cli\u003eWeighted base\u003c\/li\u003e\n\u003cli\u003eSleek, triangular, cast-iron base isvery stable and sturdy.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty finish\u003c\/li\u003e\n\u003cli\u003eEnamel coating resists rust and scratches.\u003c\/li\u003e\n\u003cli\u003eCable management\u003c\/li\u003e\n\u003cli\u003eSimply snap cables into place.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754129617,"sku":"36725","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_e69799db-6603-4d7e-b527-11787dd74d22.jpg?v=1766563695"},{"product_id":"ultimate-support-mc-125-professional-studio-boom-stand-with-casters","title":"Ultimate Support MC-125 Professional Studio Boom Stand with Casters","description":"\u003cp\u003eThe MC-125 professional studio boom stand's larger-diameter base and locking, rollerblade-style wheels provide a low center of gravity and extra stability. Smoothly raise or lower height from 52\" to 83\" with a reliable clutch. The long boom telescopes from 35\" to 61\" and features a friction-free clutch arm extension. Also includes a unique, easy-adjust 5.75-lb. counterweight for a stable microphone placement. And the threaded shaft and boom sections provide quick set up and tear down for easy transport and storage.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eHeavy Cast Base with Rollerblade-style Wheels\u003c\/li\u003e\r\n  \u003cli\u003eAdjustable Counter Weight\u003c\/li\u003e\r\n  \u003cli\u003eHeight and Length Adjustable\u003c\/li\u003e\r\n  \u003cli\u003e100% Field Serviceable Parts\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754129745,"sku":"36726","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_d3a87506-2da0-4e17-80bc-e9f984981191.jpg?v=1764590012"},{"product_id":"ultimate-support-jamstands-js-fb100-fixed-length-microphone-boom","title":"Ultimate Support JamStands JS-FB100 Fixed Length Microphone Boom","description":"\u003cp\u003eInstantly turn any mic stand into a boom stand with the JS-FB100 Fixed-length Microphone Boom Arm! The all-metal housing is powder coated for scratch resistance and the fixed boom arm will stand up to day-in\/day-out use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e32.5\" fixed-length, adjustable microphone boom arm\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8\" threading\u003c\/li\u003e\n\u003cli\u003eComfortable adjustment dial and knob\u003c\/li\u003e\n\u003cli\u003eCable management clip included\u003c\/li\u003e\n\u003cli\u003eMetal telescoping housing for superior durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754164305,"sku":"106673","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_02cb7c83-456b-4d1a-a3d3-da10b66d25e7.jpg?v=1764590006"},{"product_id":"ultimate-support-jamstands-js-mc100-tripod-straight-microphone-stand","title":"Ultimate Support JamStands JS-MC100 Tripod Straight Microphone Stand","description":"\u003cp\u003eOn stage or in the studio, you need a mic stand you can rely on. The Tripod Mic Stand resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand to perfect height with the traditional turn clutch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable to fit various needs\u003c\/li\u003e\n\u003cli\u003eStrong, tip-resistant tripod base\u003c\/li\u003e\n\u003cli\u003eScratch-resistant, poweder-coated black finish\u003c\/li\u003e\n\u003cli\u003eDie-cast leg housing for dependable base support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165009,"sku":"106677","price":27.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_696ed3d0-5614-4ede-a3b0-fa8110669d96.jpg?v=1764590009"},{"product_id":"ultimate-support-jamstands-js-mcfb100-tripod-microphone-stand-with-fixed-30-boom-arm","title":"Ultimate Support JamStands JS-MCFB100 Tripod Microphone Stand with Fixed 30\" Boom Arm","description":"\u003cp\u003eThe JS-MCFB100 Tripod Mic Stand with Fixed-Length Boom resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand with Fixed-Length Boom to perfect height with the traditional turn clutch. Also available in a 6-pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty mic stand\u003c\/li\u003e\n\u003cli\u003eDie-cast leg housing for strong support\u003c\/li\u003e\n\u003cli\u003eScratch-resistant powder-coated finish\u003c\/li\u003e\n\u003cli\u003eEasily adjust height with traditional turn clutch\u003c\/li\u003e\n\u003cli\u003eHeight adjustable from 39 - 66.5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165137,"sku":"106678","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b2a18e2d-6160-4f81-8d55-8f3d176bce53.jpg?v=1764590009"},{"product_id":"ultimate-support-jamstands-js-mcfb50-low-profile-boom-microphone-stand","title":"Ultimate Support JamStands JS-MCFB50 Low Profile Boom Microphone Stand","description":"\u003cp\u003eWhen it comes to miking sound sources that are close to the floor - such as kick drums or amplifiers - you need the right tool for the job! The JS-MCFB50 Short Mic Stand with Fixed-length Boom fits the bill perfectly, boasting a tripod base for stability and an adjustable height of 16\" to 23\". The 24\" fixed-length boom adds additional flexibility for making sure you're able to place your microphone exactly where you need it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e24\" Fixed-length boom arm\u003c\/li\u003e\n\u003cli\u003eMetal die-cast housing\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8\" threading\u003c\/li\u003e\n\u003cli\u003eShort height for hard-to-get-to spaces\u003c\/li\u003e\n\u003cli\u003eNon-slip rubber feet\u003c\/li\u003e\n\u003cli\u003eStrong, tip-resistant tripod base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165329,"sku":"106680","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_e82227fa-bd1e-4332-a5c4-6ece9d04c8c0.jpg?v=1766574398"},{"product_id":"ultimate-support-jamstands-js-mcrb100-round-base-microphone-stand-with-adjustable-height","title":"Ultimate Support JamStands JS-MCRB100 Round Base Microphone Stand with Adjustable Height","description":"\u003cp\u003eWhen you're performing onstage, you need a mic stand you can rely on. The JS-MCRB100 is a Round Base Mic Stand resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour schedules. Easily adjust the Round Base Mic Stand to perfect height with the traditional turn clutch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Name: JS-MCRB100\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mic stand\u003c\/li\u003e\n\u003cli\u003eTraditional round-base stand\u003c\/li\u003e\n\u003cli\u003eScratch-resistant powder-coated finish\u003c\/li\u003e\n\u003cli\u003eEasily adjust height with traditional turn clutch\u003c\/li\u003e\n\u003cli\u003eHeight adjustable from 33.9 - 61\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165393,"sku":"106681","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_89c181d4-2f7b-4fc0-954d-33246ff2e3b0.jpg?v=1766563710"},{"product_id":"ultimate-support-jamstands-js-mctb200-tripod-microphone-stand-with-telescoping-boom","title":"Ultimate Support JamStands JS-MCTB200 Tripod Microphone Stand with Telescoping Boom","description":"\u003cp\u003eOnstage or in the studio, you need a mic stand you can rely on. The JS-MCTB200 Tripod Mic Stand with Telescoping Boom resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand with Telescoping Boom to perfect height with the traditional turn clutch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty mic stand\u003c\/li\u003e\n\u003cli\u003eDie-cast leg housing for strong support\u003c\/li\u003e\n\u003cli\u003eScratch-resistant powder-coated finish\u003c\/li\u003e\n\u003cli\u003eEasily adjust height with traditional turn clutch\u003c\/li\u003e\n\u003cli\u003eHeight adjustable from 39.25 - 66.5\u003c\/li\u003e\n\u003cli\u003eTelescoping Boom adjustable from 20.75 - 35.75\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165457,"sku":"106682","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_4bf0618c-5b28-4ee8-b7f7-e010cab2e16b.jpg?v=1766574399"},{"product_id":"ultimate-support-jamstands-js-mctb50-short-telescoping-boom-mic-stand","title":"Ultimate Support JamStands JS-MCTB50 Short Telescoping Boom Mic Stand","description":"\u003cp\u003eWhen it comes to miking sound sources that are close to the floor - such as kick drums or amplifiers - you need the right tool for the job! The JS-MCTB50 Short Mic Stand with Telescoping Boom fits the bill perfectly, boasting a tripod base for stability and an adjustable height of 16\" to 23\". The telescoping boom adds additional flexibility for making sure you're able to place your microphone exactly where you need it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTelescoping boom arm adjusts from 16.5\" to 29\"\u003c\/li\u003e\n\u003cli\u003eMetal die-cast housing\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8\" threading\u003c\/li\u003e\n\u003cli\u003eShort height for hard-to-get-to spaces\u003c\/li\u003e\n\u003cli\u003eNon-slip rubber feet\u003c\/li\u003e\n\u003cli\u003eStrong, tip-resistant tripod base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165521,"sku":"106683","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_528316c9-9a04-4277-a954-bf5b02022cff.jpg?v=1766568158"},{"product_id":"ultimate-support-jamstands-js-tb100-telescoping-microphone-boom","title":"Ultimate Support JamStands JS-TB100 Telescoping Microphone Boom","description":"\u003cp\u003eInstantly turn any mic stand into a boom stand with the JS-TB100 Telescoping Microphone Boom Arm! The all-metal housing is powder coated for scratch resistance and the telescoping boom arm will stand up to day-in\/day-out use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e19.5\" to 34.5\" adjustable telescoping microphone boom arm\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8\" threading\u003c\/li\u003e\n\u003cli\u003eComfortable adjustment dial and knob\u003c\/li\u003e\n\u003cli\u003eCable management clip included\u003c\/li\u003e\n\u003cli\u003eMetal telescoping housing for superior durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754165841,"sku":"106687","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_74a380e6-90ac-4c6f-81a5-a5abcb9131f8.jpg?v=1764590013"},{"product_id":"ultimate-support-jamstands-js-dms50-desktop-microphone-stand","title":"Ultimate Support JamStands JS-DMS50 Desktop Microphone Stand","description":"\u003cp\u003eThe JS-DMS50 Desktop Microphone Stand is the perfect solution when need a great, affordable mic stand for panel discussions, podcasting, and desktop voice overs! It features a solid die-cast round base for stability and an adjustable height of 8\" to 12.25\" and a non-slip rubber ring on the bottom of the base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable from 8\" to 12.25\"\u003c\/li\u003e\n\u003cli\u003eScratch-resistant, powder coated black finish\u003c\/li\u003e\n\u003cli\u003eNon-slip rubber ring on bottom of base\u003c\/li\u003e\n\u003cli\u003eSolid die-cast round base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754172241,"sku":"203072","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_863a0175-fc70-4e75-b0c0-6104647749c7.jpg?v=1764590007"},{"product_id":"ultimate-support-jamstands-js-dms75-desktop-gooseneck-microphone-stand","title":"Ultimate Support JamStands JS-DMS75 Desktop Gooseneck Microphone Stand","description":"\u003cp\u003eThe JS-DMS75 Desktop Gooseneck Microphone Stand is the perfect solution when need a great, affordable mic stand for panel discussions, podcasting, and desktop voice overs! It features a solid die-cast round base for stability and a gooseneck shaft that adjusts quickly and quietly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjust microphone position quickly and easily with gooseneck shaft\u003c\/li\u003e\n\u003cli\u003eScratch-resistant, powder coated black finish\u003c\/li\u003e\n\u003cli\u003eNon-slip rubber ring on bottom of base\u003c\/li\u003e\n\u003cli\u003eSolid die-cast round base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754172305,"sku":"203073","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_eb2e024f-9ea4-42c6-9bfb-b361fe2f2088.jpg?v=1766578916"},{"product_id":"ultimate-support-jamstands-js-kd50-short-boom-microphone-stand","title":"Ultimate Support JamStands JS-KD50 Short Boom Microphone Stand","description":"\u003cp\u003eWhen it comes to miking sound sources that reside close to the floor (such as kick drums or amplifiers), you need the right tool for the job. The Kick Drum\/Amp Mic Stand fits the bill perfectly, boasting a solid base for stability and an adjustable height of up to 17\". The fixed boom arm adds additional flexibility. The powder-coated finish keeps the Kick Drum\/Amp Mic Stand looking good through years of use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow profile mic stand for kick drums and guitar amps\u003c\/li\u003e\n\u003cli\u003eHeavy-duty die-cast base\u003c\/li\u003e\n\u003cli\u003eFixed boom arm provides precise positioning\u003c\/li\u003e\n\u003cli\u003eScratch-resistant powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754172881,"sku":"203080","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_aecf0541-11ac-4a82-a8c3-f70bf3aefef9.jpg?v=1766576335"},{"product_id":"ultimate-support-jamstands-js-mms1-mini-desktop-tripod-microphone-stand","title":"Ultimate Support JamStands JS-MMS1 Mini Desktop Tripod Microphone Stand","description":"\u003cp\u003eWhen it comes to miking seated speakers, you need the right tool for the job. The Mini Tripod Table-top Mic Stand\/Clip fits the bill perfectly, boasting a solid base for stability and an adjustable height of up to 9.25. The powder-coated finish keeps the Mini Tripod Table-top Mic Stand\/Clip looking good through years of use. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmall low-profile tripod mic stand\u003c\/li\u003e\n\u003cli\u003eTripod base for stability\u003c\/li\u003e\n\u003cli\u003eScratch-resistant powder-coated finish\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754173585,"sku":"203098","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_61f85197-cd70-4e2f-a44e-3415c6213fca.jpg?v=1766569895"},{"product_id":"ultimate-support-live-st-weighted-base-microphone-stand-with-one-hand-pistol-grip-height-adjustment","title":"Ultimate Support LIVE-ST Weighted Base Microphone Stand with One-Hand Pistol Grip Height Adjustment","description":"\u003cp\u003eUltimate Support invented the one-hand height adjustable microphone stand nearly two decades ago. The Live Series mic stands are intended to make the life of the musician easier with a super ergonomic clutch that easily raises and lowers to a desired height with just one hand. Plus, Live Series mic stands are constructed from super strong, lightweight aluminum so they're able to take the demands of today's musicians but light enough to go anywhere. Available in three base options (tripod, weighted, and stackable), there's a Live Series microphone stand that's perfect for your needs!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLive-ST Product Breakdown:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eErgo Clutch - One-handed Height Adjustment \u003c\/li\u003e\n\u003cli\u003eDurable, Lightweight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eAvailable With Three Different Bases\u003c\/li\u003e\n\u003cli\u003ePatented Universal Mic Attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eErgo Clutch - One-handed Height Adjustment\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned as the perfect performance stand, the new Ergo one-hand clutch holds better than any other one-hand stand. New ergonomic handle feels great in your hand and is easy to use - just squeeze to easily raise or lower the microphone.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDurable, Lightweight Aluminum Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLive Series microphone stands are designed with the lead singer in mind. They're light enough to move from gig to gig, but robust enough to take whatever you can throw at them. Durable, anodized aluminum construction creates a strong, ultra-lightweight stand preferred by lead singers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailable With Three Different Bases\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe Live Series mic stand is available with one of three base configurations. The Live-T features a locking tripod mechanism that locks legs in place for stable performance and fold up and locks for compact transport (simply turn the locking ring on the base to unlock legs and open). The Live-ST features a sturdy, die-cast standard weighted base while the stackable Live-SB combines the stability of a weighted base with the ability to stack six of them in the same space as just one!\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePatented Universal Mic Attachment\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWhether you're performing in the States or over seas, a Live Series microphone stand is the only stand you'll need. The top threads fit both US- and metric-threaded mic clips and accessories for use all around the world.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754173969,"sku":"203123","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_011722d1-8fdb-4da3-8d83-615735ca26d5.jpg?v=1771538238"},{"product_id":"ultimate-support-live-t-tripod-base-microphone-stand-with-one-hand-pistol-grip-height-adjustment","title":"Ultimate Support LIVE-T Tripod Base Microphone Stand with One-Hand Pistol Grip Height Adjustment","description":"\u003cp\u003eUltimate Support invented the one-hand height adjustable microphone stand nearly two decades ago. The Live Series mic stands are intended to make the life of the musician easier with a super ergonomic clutch that easily raises and lowers to a desired height with just one hand. Plus, Live Series mic stands are constructed from super strong, lightweight aluminum so they're able to take the demands of today's musicians but light enough to go anywhere. Available in three base options (tripod, weighted, and stackable), there's a Live Series microphone stand that's perfect for your needs!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLive-T Product Breakdown:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eErgo Clutch - One-handed Height Adjustment\u003c\/li\u003e\n\u003cli\u003eDurable, Lightweight Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eAvailable With Three Different Bases\u003c\/li\u003e\n\u003cli\u003ePatented Universal Mic Attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eErgo Clutch - One-handed Height Adjustment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDesigned as the perfect performance stand, the new Ergo one-hand clutch holds better than any other one-hand stand. New ergonomic handle feels great in your hand and is easy to use - just squeeze to easily raise or lower the microphone.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDurable, Lightweight Aluminum Construction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLive Series microphone stands are designed with the lead singer in mind. They're light enough to move from gig to gig, but robust enough to take whatever you can throw at them. Durable, anodized aluminum construction creates a strong, ultra-lightweight stand preferred by lead singers.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailable With Three Different Bases:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe Live Series mic stand is available with one of three base configurations. The Live-T features a locking tripod mechanism that locks legs in place for stable performance and fold up and locks for compact transport (simply turn the locking ring on the base to unlock legs and open). The Live-ST features a sturdy, die-cast standard weighted base while the stackable Live-SB combines the stability of a weighted base with the ability to stack six of them in the same space as just one!\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePatented Universal Mic Attachment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWhether you're performing in the States or over seas, a Live Series microphone stand is the only stand you'll need. The top threads fit both US- and metric-threaded mic clips and accessories for use all around the world.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754174481,"sku":"203124","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_d80d657a-6f69-40be-a59f-dc0647ec51e2.jpg?v=1766571830"},{"product_id":"ultimate-support-ax-48pro-mic-boom","title":"Ultimate Support AX-48PRO Mic Boom","description":"\u003cp\u003eHave you ever wished your keyboard stand and microphone stand were the same stand? Tired of trying to figure out where to put your mic stand when playing keyboards? This extremely convenient boom adapter and boom arm is for use with the APEX AX-48 Pro keyboard stand. Simply detach the accessory compartment lid on the top of the APEX AX-48 Pro, snap this microphone boom adapter into place, tighten the two bolts (Allen wrench included), and attach the included Ulti-Boom boom arm and you're all set!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeyboard Stand and Mic Stand - The Same Stand!\u003c\/li\u003e\n\u003cli\u003eEasy to Install\u003c\/li\u003e\n\u003cli\u003eUlti-Boom Telescoping Boom Arm Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754187665,"sku":"355851","price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c39cd268-fbf4-41f1-8fd6-f30155330ffc.jpg?v=1764590008"},{"product_id":"ultimate-support-jamstands-jsmcfb6pk-set-of-6-boom-mic-stands-with-bag","title":"Ultimate Support JamStands JSMCFB6PK Set of 6 Boom Mic Stands with Bag","description":"\u003cp\u003eThe JS-MCFB6PK is the perfect addition to any school program, house of worship, and garage band! It includes six tripod microphone stands with non-detachable 31\" fixed-length boom arms. So, whether you have a choir, six singers, two singers and drums, three singers, one harmonica player, and two bag pipe pipers, or whatever arrangement you may have, with the JS-MCFB6PK you'll have plenty of mic stands to go around! What's more, we've included a FREE handy carrying bag to transport and store your six mic stands in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix (6) tripod microphone stands\u003c\/li\u003e\n\u003cli\u003eEach stand features a non-detachable 31\" boom arm\u003c\/li\u003e\n\u003cli\u003eHandy carrying bag included for FREE!\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8\" threading\u003c\/li\u003e\n\u003cli\u003eNon-slip rubber feet\u003c\/li\u003e\n\u003cli\u003eStrong, tip-resistant tripod base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754245521,"sku":"508596","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_1c3d4fa4-9809-4ff1-ad80-5533de88c74e.jpg?v=1764590005"},{"product_id":"ultimate-support-jamstands-jskd55-tiltable-short-boom-microphone-stand","title":"Ultimate Support JamStands JSKD55 Tiltable Short Boom Microphone Stand","description":"\u003cp\u003eThe JS-KD55 is a low-profile mic stand that fits just about anywhere your kick drum or guitar amp might end up. At 15.5\" to 21\", it's plenty short enough to blend in on stage or in your studio. Plus, the v-shaped base means you can even set it around corners or close to other stands and equipment without the base getting in the way. Not only is the JS-KD55 height adjustable, but it's also angle and depth adjustable as well! The stand is angle adjustable at the base and it includes a 16.5\" fixed boom arm for even greater flexibility. You can get your microphone exactly where you want it to be with the JS-KD55!\u003c\/p\u003e\u003cp\u003eYou'll find many uses for the heavy-duty JS-KD55. Of course you can use it to mic up your kick drum or guitar amp, but it's also a great desktop solution as well! Whether you need sound reinforcement for a press conference, want to record your next podcast, or are mic'ing up the band, this mic stand offers the flexibility your next project demands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow-profile mic stand for tight spaces\u003c\/li\u003e\n\u003cli\u003eHeavy-duty die-cast base\u003c\/li\u003e\n\u003cli\u003eAngle-adjustable base for precise positioning\u003c\/li\u003e\n\u003cli\u003eFixed boom arm provides even greater flexibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754245585,"sku":"508597","price":37.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_0d08201e-a14f-4301-b5d7-a9ab7a8b504e.jpg?v=1764590006"},{"product_id":"triad-orbit-t1-triad-short-articulating-microphone-stand","title":"Triad-Orbit T1 Triad Short Articulating Microphone Stand","description":"\u003cp\u003eThe TRIAD proprietary articulating base provides the weight and stability of large diameter cast iron bases and a fully adjustable attitude and footprint, thanks to its patent-pending ratcheting mechanism. Each leg of a TRIAD base has four ratcheted positions that provide up to 65 degrees of pitch to accommodate 'boom-less' front lines, uneven surfaces and stacking for storage.\u003c\/p\u003e \u003cp\u003eThe exclusive IO Quick-Change Coupler is standard equipment on all TRIAD Stands. IO effortlessly captures booms and mics with ease and assurance. 'On-the-fly' hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off.\u003c\/p\u003e \u003cp\u003eTRIAD Stands utilize professional-grade clutches in lieu of knobs and thumbscrews to adjust and secure shafts and bases. Knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754277905,"sku":"678101","price":260.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_ee94e794-57a5-42e1-bc16-f1bf62d6b34c.jpg?v=1771538619"},{"product_id":"triad-orbit-t2-triad-standard-articulating-microphone-stand","title":"Triad-Orbit T2 Triad Standard Articulating Microphone Stand","description":"\u003cp\u003eThe TRIAD proprietary articulating base provides the weight and stability of large diameter cast iron bases and a fully adjustable attitude and footprint, thanks to its patent-pending ratcheting mechanism. Each leg of a TRIAD base has four ratcheted positions that provide up to 65 degrees of pitch to accommodate 'boom-less' front lines, uneven surfaces and stacking for storage.\u003c\/p\u003e \u003cp\u003eThe exclusive IO Quick-Change Coupler is standard equipment on all TRIAD Stands. IO effortlessly captures booms and mics with ease and assurance. 'On-the-fly' hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off.\u003c\/p\u003e \u003cp\u003eTRIAD Stands utilize professional-grade clutches in lieu of knobs and thumbscrews to adjust and secure shafts and bases. Knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754277969,"sku":"678102","price":271.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_75a582b0-3262-4995-8f8d-a8383fd844b5.jpg?v=1771543244"},{"product_id":"triad-orbit-t3-triad-large-articulating-microphone-stand","title":"Triad-Orbit T3 Triad Large Articulating Microphone Stand","description":"\u003cp\u003eThe TRIAD proprietary articulating base provides the weight and stability of large diameter cast iron bases and a fully adjustable attitude and footprint, thanks to its patent-pending ratcheting mechanism. Each leg of a TRIAD base has four ratcheted positions that provide up to 65 degrees of pitch to accommodate 'boom-less' front lines, uneven surfaces and stacking for storage.\u003c\/p\u003e \u003cp\u003eThe exclusive IO Quick-Change Coupler is standard equipment on all TRIAD Stands. IO effortlessly captures booms and mics with ease and assurance. 'On-the-fly' hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off.\u003c\/p\u003e \u003cp\u003eTRIAD Stands utilize professional-grade clutches in lieu of knobs and thumbscrews to adjust and secure shafts and bases. Knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque.\u003c\/p\u003e \u003cp\u003eTRIAD T3 Tall Tripod Stands feature an air suspension system to protect expensive studio microphones against accidental impact damage.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754278097,"sku":"678103","price":328.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_f893d86b-9c6f-430d-acd3-805ac49b7b47.jpg?v=1771538621"},{"product_id":"triad-orbit-t-es-3-foot-shaft-extension-for-triad-mic-stands","title":"Triad-Orbit T-ES 3 Foot Shaft Extension (for Triad Mic Stands)","description":"\u003cp\u003eT-ES is a 3-ft. extension for TRIAD stands. Equipped with IO Quick-Change Couplers, the T-ES is designed to elevate microphones for choral and orchestral applications, ambient recording, wireless transmitter antennas, etc.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754278225,"sku":"678104","price":55.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_521c3c78-6c61-4100-94bd-c752f3cb61a2.jpg?v=1771541418"},{"product_id":"triad-orbit-o2-orbit-2-dual-arm-orbit-microphone-boom","title":"Triad-Orbit O2 Orbit 2 Dual Arm Orbit Microphone Boom","description":"\u003cp\u003eORBIT O2 Dual Orbital Booms feature a unique dual-arm design - each arm is equipped with the proprietary ORBIT ball swivel mechanism, making it the 'go-to' stand for stereo or dual miking assignments such as grand pianos, upright basses, snare drums (top and bottom), guitar and vocals, choirs, big bands, and orchestras. ORBIT 2 Booms do the work of two stands, freeing up resources when multiple mics are called for and space is limited.\u003c\/p\u003e \r\n\u003cp\u003ePlease Note: If you would like to utilize an ORBIT 2 Boom with your existing weighted studio-quality stand, you will need to purchase an IO-R Coupler.\u003c\/p\u003e\r\n\u003cbr\u003e\u003cp\u003eDual boom arms are only part of the ORBIT 2 story. Anchoring ORBIT 2 is a novel center swivel that provides an additional 145° of left-right motion to the boom arms. The COMPASS POINTball swivel housing provides each O2 boom arm with precise, stable positioning whenever the arms are engaged. And IO Quick-Change Couplers terminate the end of every O2 arm, offering twice the versatility of conventional booms in a fraction of the time it takes for normal setups.\u003c\/p\u003e \r\n\u003cp\u003eThe exclusive IO Quick-Change Coupler is standard equipment on all ORBIT 2 Booms. IO effortlessly captures booms and mics with ease and assurance. 'On-the-fly' hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off.\u003c\/p\u003e \r\n\u003cp\u003eTired of lost and sheared tensioning knob sidelining booms in your stand inventory? ORBIT 2 Booms utilize industrial-grade clutches in lieu of knobs and thumbscrews to secure all points of adjustment on the shafts. The knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque.\u003c\/p\u003e \r\n\u003cp\u003eThe IOQuick-Change Coupler is standard equipment on both ends of every ORBIT 2 Boom. IO effortlessly and securely couples ORBIT Booms to TRIAD Stands and standard mic clips\/mounts and MICRO Orbital Mic Adapters to ORBIT Boom Arms in seconds. IO offers twice the utility and functionality in a fraction of normal setup and striking time.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754278545,"sku":"678106","price":339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_7f8d4534-fd0e-40a9-a072-639e4def6c90.jpg?v=1771542605"},{"product_id":"triad-orbit-micro-2-m2-orbital-mic-adaptor","title":"Triad-Orbit Micro 2 M2 Orbital Mic Adaptor","description":"\u003cp\u003eThe MICRO M2 orbital mic adaptor features the exclusive Compass Point ball swivel housing that solidly secures mics in position for precise directionality. The short stem mounting arm is purpose-built to reduce setup time for those who need precision microphone placement. M2 adaptors are IO-equipped for quick-change compatibility with TRIAD microphone stands, ORBIT booms and IO-R couplers.\u003c\/p\u003e \u003cp\u003eThe MICRO M2 Orbital Mic Adaptor features a short stem mounting arm purpose-built for microphones of smaller stature ranging from small diaphragm condensers to hand-held dynamics. The exclusive COMPASS POINT ball swivel housing solidly secures mics in any mounting position. M2 Adaptors are IO-equipped for quick-change compatibility with TRIAD Microphone Stands and ORBIT Booms.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754278737,"sku":"678108","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_44f10e7e-b3c4-4288-a9b3-df20752ce441.jpg?v=1771538625"},{"product_id":"triad-orbit-m2-r-retrofit-orbital-mic-mount","title":"Triad-Orbit M2-R Retrofit Orbital Mic Mount","description":"\u003cp\u003eConventional mic stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO Retrofit Components. Retrofitting conventional mic stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. MICRO and IO Retrofit Components are equipped with traditional 5\/8-inch threads for universal compatibility.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754279633,"sku":"678112","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_3011121a-f74c-403c-aa0c-733cc38f84ed.jpg?v=1771542606"},{"product_id":"ultimate-support-ax-48ta-threaded-adaptor-for-apex-pro-stands","title":"Ultimate Support AX-48TA Threaded Adaptor for Apex Pro Stands","description":"\u003cp\u003eThe AX-48 Pro Threaded Adapter is an adapter that fits into the accessory space at the top of your APEX AX-48 Pro! Simple to install, simply snap the AX-48 Pro Threaded Adapter into place and tighten the two included bolts. Once installed, your APEX AX-48 Pro will have a 5\/8\" thread on top so you can add a microphone boom arm or any number of other devices! It's the perfect addition to your HyperPad, HyperStation QR, or HyperMount QR stands for adding iPads or laptops to the top of your AX-48 Pro!\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eFor use with APEX AX-48 Pro keyboard stand\u003c\/li\u003e \r\n  \u003cli\u003eEasy to install\u003c\/li\u003e \r\n  \u003cli\u003e5\/8\" thread adapter\u003c\/li\u003e \r\n  \u003cli\u003eAdd microphone boom, HyperPad, HyperStation QR, or HyperMount QR to your APEX AX-48 Pro keyboard stand!\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754289361,"sku":"749830","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_fa0b3407-608a-44ba-ab9b-7f6b6c30cba4.jpg?v=1764590011"},{"product_id":"triad-orbit-tm-mini-tripod-orbital-microphone-stand","title":"Triad-Orbit TM Mini Tripod Orbital Microphone Stand","description":"\u003cp\u003eTriad Mini Tripod - Perfect for kick drums, combo amps and where ultra-low-profile and small-footprint stands are needed.\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eMax. Footprint: 13.25 in.\u003c\/li\u003e \r\n  \u003cli\u003eMin. Height: 14.5 in.\u003c\/li\u003e \r\n  \u003cli\u003eMax. Height (legs in Position 4): 25.25 in.\u003c\/li\u003e \r\n  \u003cli\u003eMax. Height (legs in Position 1): 21.5 in.\u003c\/li\u003e \r\n  \u003cli\u003eCollapsed size: 16.25 in.\u003c\/li\u003e \r\n  \u003cli\u003eWeight: 8.15 lbs\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754290641,"sku":"764090","price":226.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_735e4fcb-550b-4f3b-8ef8-96120a709d4c.jpg?v=1771538694"},{"product_id":"triad-orbit-om-orbit-mini-boom-arm-for-orbital-mic-stands","title":"Triad-Orbit OM Orbit Mini Boom Arm for Orbital Mic Stands","description":"\u003cp\u003eThe ORBIT Mini - The little brother of Orbit 1 and the companion boom arm for the Triad Mini Stand. Awesome in tight spaces and backline applications. Also great for vocals and acoustic instruments where an extended boom is unneeded.\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eBoom Arm Range: 12.2 - 21.65 in.\u003c\/li\u003e \r\n  \u003cli\u003eRange of Motion: 360° x 190°\u003c\/li\u003e \r\n  \u003cli\u003eWeight: 4.25 lbs\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754290769,"sku":"764091","price":191.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_0549b4a1-dc14-4061-98ef-8f25acde99e3.jpg?v=1771538694"},{"product_id":"triad-orbit-oa-orbital-boom-with-quick-change-arm","title":"Triad-Orbit OA Orbital Boom with Quick Change Arm","description":"\u003cp\u003eThe Orbit OA is a freestanding version of a single Orbit 2 type orbital boom arm. Extend and maneuver heavy devices with exact placement only possible with this heavy duty ball joint. Use with IO-C and Synergy clamps to extend devices from Triad stands, or use with IO-W \u0026amp; IO-WSP to accurately position devices from walls or ceilings. Pairing with an IO-VM creates options for wall or floor mounting video monitors or televisions.\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eBoom Arm Range: 21.75 - 31 in.\u003c\/li\u003e \r\n  \u003cli\u003eRange of Motion: 360° x 230°\u003c\/li\u003e \r\n  \u003cli\u003eWeight: 1.4 lbs\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754290961,"sku":"764092","price":146.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_23968564-6e2b-49e7-99d1-765b5e171a53.jpg?v=1771541476"},{"product_id":"triad-orbit-o2x-dual-orbital-boom-system-with-long-and-short-arms","title":"Triad-Orbit O2x Dual Orbital Boom System (with Long And Short Arms)","description":"\u003cp\u003eOrbit 2X dual orbital boom system extends the utility of the original O2 dual orbital boom with the addition of detachable arms via IO Quick Change Couplers. Four IO A telescopic boom arms are included (2 short arms, 2 long arms), allowing users to custom-configure a dual boom to adapt to a multitude of tasks in seconds.\u003c\/p\u003e \u003cp\u003eThe exclusive IO Quick-Change Coupler is standard equipment on all ORBIT 2 Booms. IO effortlessly captures booms and mics with ease and assurance. 'On-the-fly' hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off.\u003c\/p\u003e \u003cp\u003eTired of lost and sheared tensioning knob sidelining booms in your stand inventory? ORBIT 2 Booms utilize industrial-grade clutches in lieu of knobs and thumbscrews to secure all points of adjustment on the shafts. The knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque.\u003c\/p\u003e \u003cp\u003eThe IO™ Quick-Change Coupler is standard equipment on both ends of every ORBIT 2 Boom. IO effortlessly and securely couples ORBIT Booms to TRIAD Stands and standard mic clips\/mounts and MICRO ™ Orbital Mic Adapters to ORBIT Boom Arms in seconds. IO offers twice the utility and functionality in a fraction of normal setup and striking time.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754291025,"sku":"764093","price":475.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_43c8b728-1aa3-482f-87c5-119c0971ec71.jpg?v=1771542678"},{"product_id":"triad-orbit-io-h1-5-8-brass-mounting-head-for-quick-change-couplers","title":"Triad-Orbit IO-H1 5\/8\" Brass Mounting Head for Quick Change Couplers","description":"\u003cp\u003e5\/8” Brass mounting head for IO \u0026amp; IO-R Quick-Change Couplers.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754291345,"sku":"764094","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c099289b-2d23-4ef8-a540-5eed2c349c46.jpg?v=1766571883"},{"product_id":"triad-orbit-io-h2-5-8-stainless-steel-mounting-head-for-quick-change-couplers","title":"Triad-Orbit IO-H2 5\/8\" Stainless Steel Mounting Head for Quick Change Couplers","description":"\u003cp\u003e5\/8\" Stainless Steel mounting head for IO \u0026amp; IO-R Quick-Change Couplers.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754291409,"sku":"764095","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_80793801-770e-4b08-a656-22cd0362389c.jpg?v=1771538696"},{"product_id":"triad-orbit-io-h3-3-8-brass-mounting-head-for-quick-change-couplers","title":"Triad-Orbit IO-H3 3\/8\" Brass Mounting Head for Quick Change Couplers","description":"\u003cp\u003e3\/8\" Brass mounting head for IO \u0026amp; IO-R Quick-Change Couplers.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754291537,"sku":"764096","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_35e93be5-89c9-4f36-adac-37218835e574.jpg?v=1771538697"},{"product_id":"triad-orbit-io-h5-lighting-stand-mounting-head-for-quick-change-couplers","title":"Triad-Orbit IO-H5 Lighting Stand Mounting Head for Quick Change Couplers","description":"\u003cp\u003eLighting Stand mounting head for IO \u0026amp; IO-R Quick-Change Couplers.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754291729,"sku":"764098","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_3f968de6-c90f-425d-83cc-e231b4e26a43.jpg?v=1771538698"},{"product_id":"ultimate-support-ulti-boompro-tb-telescoping-microphone-boom-arm","title":"Ultimate Support ULTI-BOOMPRO-TB Telescoping Microphone Boom Arm","description":"\u003cp\u003eUlti-Boom Series Microphone Boom Arm with Patented One-touch Adjustment, StableLock™ Telescoping Lever, and Die-Cast Counterweight - Telescoping\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \r\n\u003cul\u003e \r\n  \u003cli\u003eOne Knob To Rule Them All!\u003c\/li\u003e \r\n  \u003cli\u003ePatented StableLock Lever\u003c\/li\u003e \r\n  \u003cli\u003eHeavy-duty Counterweight\u003c\/li\u003e \r\n  \u003cli\u003eAluminum Tubing with Architectural Anodized Finish\u003c\/li\u003e \r\n\u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754307281,"sku":"839205","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_e4956bbc-a1d9-4f1e-a769-3c94ea0115eb.jpg?v=1766574394"},{"product_id":"ultimate-support-mc-40b-pro-tripod-boom-microphone-stand","title":"Ultimate Support MC-40B PRO Tripod Boom Microphone Stand","description":"\u003cp\u003eUltimate Support's Classic Series microphone stands deliver features such as a fast, quiet, and reliable clutch, built-in cable management clips, and a super stable base. Competitive features meet a competitive price in this modern classic which features a patented Four Degrees of Freedom boom arm. With just one touch, you can quickly angle and adjust your mic position with unparalleled control.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePatented one-touch adjustment controls tilt, pan, depth, and rotation!\u003c\/li\u003e \u003cli\u003eSuper quiet clutch that is reliable, and impressively easy to tighten and release!\u003c\/li\u003e \u003cli\u003eStable stand has a durable resin base with tripod legs that snap into place!\u003c\/li\u003e \u003cli\u003e31.75\" fixed-length boom for use on stage and in the studio.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Ultimate Support","offers":[{"title":"Default Title","offer_id":37754328081,"sku":"946842","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_7515702d-aafb-46b9-8559-01cdc43526b8.jpg?v=1766563781"},{"product_id":"triad-orbit-triad-t3c-tall-tripod-microphone-stand-with-casters","title":"Triad-Orbit Triad-T3C Tall Tripod Microphone Stand with Casters","description":"\u003cp\u003eAdding industrial-grade locking casters to Triad-Orbit's large 3-section tripod stand creates a surprisingly stable rolling support platform for music, A\/V, photography, lighting, computing, industrial and medical applications. TC casters are easy to install and remove for versatile utility.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWheel Diameter: 3 in.\u003c\/li\u003e \u003cli\u003eMax. Footprint: 24 in.\u003c\/li\u003e \u003cli\u003eMax. Height (legs in Position 1): 75.5 in.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cbr\u003e TRIAD Stands utilize professional-grade clutches in lieu of knobs and thumbscrews to adjust and secure shafts and bases. Knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque.\u003c\/p\u003e \u003cp\u003eEach leg of a TRIAD base has four ratcheted positions that provide a pitch of up to 65 degrees to accommodate 'boom-less' front lines, uneven surfaces and stacking. A foot-actuated latch on each leg provides hands-free adjustability.\u003c\/p\u003e \u003cp\u003eThe exclusive IO Quick-Change Coupler is standard equipment on all TRIAD Stands. IO effortlessly captures booms and mics with ease and assurance. 'On-the-fly' hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754336721,"sku":"1182639","price":407.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_fe66b9ee-0877-4ff9-bcfe-7787fc0b14e5.jpg?v=1771545033"},{"product_id":"triad-orbit-io-ra-retrofit-quick-coupler-for-triad-orbit-stands","title":"Triad-Orbit IO-RA Retrofit Quick Coupler (For Triad-Orbit Stands)","description":"\u003cp\u003eIO-RA is the aluminum version of Triad-Orbit’s groundbreaking IO-R quick-change coupler. IO-RA retrofit couplers are 50% lighter than the original steel IO-R—a major consideration for live sound\/production applications. IO-RA retrofit couplers also cost 50% less than IO-R, making them affordable to everyone. Every IO-RA is loaded with an IO-H1 hex mounting head.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754336913,"sku":"1182641","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_bed04eda-546e-4738-b5b0-0ca10f2197a0.jpg?v=1771541742"},{"product_id":"triad-orbit-io-r38-retrofit-quick-change-coupler-for-io-vector","title":"Triad-Orbit IO-R38 Retrofit Quick Change Coupler for IO-Vector","description":"\u003cp\u003eThe unique 3\/8\" mounting threads of the IO-R38 can be mounted in any of the IO-Vector's three female mounting points (front, back, top).\u003c\/p\u003e \n\u003cp\u003eTriad-Orbit's IO-Vector ™ takes the traditional stereo bar to a new dimension-literally. IO-Vector provides five points of connectivity for 3-D positioning of microphones, cameras, lights and other creative devices.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754337041,"sku":"1182642","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_51756ae5-912c-4f20-81cf-332030ecd7a1.jpg?v=1771539027"},{"product_id":"triad-orbit-io-rl-lighting-stud-quick-change-coupler","title":"Triad-Orbit IO-RL Lighting Stud Quick Change Coupler","description":"\u003cp\u003eIO?RL is the first full-size quick-change coupler designed specifically for photo, video, film and lighting support. IO?RL enables instant hardware swaps, replacing tedious threaded screw and hole connections. IO?RL provides a faster, more secure, hassle-free method of connecting lights, flashes and modifiers to C-Stands and booms with no spin out.\u003c\/p\u003e \u003cp\u003eIO-RL Lighting Stud Quick-Change Couplers are designed to connect professional lights to lighting stands and mounting hardware. IO?RL retrofits to conventional C-stands and lighting mounts and provides instant IO quick-change compatibility.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIO-RL is compatible with all Triad-Orbit quick-connection heads.\u003c\/strong\u003e\u003cbr\u003e Triad-Orbit offers two IO?H Hex Mounting Heads specifically for professional lighting applications: •IO?H5 IO standard lighting stud (5\/8\") with 1\/4\"?20 mounting thread. •IO?H6 IO 'Baby Pin' lighting stud with 5\/8\" diameter pin. * Both feature a flat side stud for 'no spin' mounting and notched stainless steel IO hex shaft for added weight handling capacity.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAdditional IO-H5's can be inserted into your lights and modifiers. Just set it and forget it!\u003c\/strong\u003e\u003cbr\u003e Equip all your lights and modifiers with Triad?Orbit IO?H5 hex mounting heads for instant quick-change mounting to IO?RL. IO?RL pays for itself with time saved during set changes.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754337105,"sku":"1182643","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_1860b6f8-58d7-4676-9457-9e2657264831.jpg?v=1771543308"},{"product_id":"triad-orbit-io-a1a-short-telescoping-boom-arm-for-triad-orbit-stands","title":"Triad-Orbit IO-A1A Short Telescoping Boom Arm (for Triad-Orbit Stands)","description":"\u003cp\u003eIO-A1A is an aluminum short IO telescopic boom arm. Range: 9.5\" to 12.7\".\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754337553,"sku":"1182647","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_c88dfba8-3e01-4b3e-bcfa-cf007fd78f83.jpg?v=1771545034"},{"product_id":"triad-orbit-io-a2a-long-telescoping-boom-arm-for-triad-orbit-stands","title":"Triad-Orbit IO-A2A Long Telescoping Boom Arm (for Triad-Orbit Stands)","description":"\u003cp\u003eIO-A2A is an aluminum Long telescopic IO boom arm. Range: 15.5\" to 24.8\"\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754337745,"sku":"1182648","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_b11cbc68-2028-452b-95dd-d80118ac1578.jpg?v=1771541744"},{"product_id":"triad-orbit-io-h6-lighting-stud-for-quick-change-couplers","title":"Triad-Orbit IO-H6 Lighting Stud (for Quick Change Couplers)","description":"\u003cp\u003eIO-H6™ is an aluminum IO lighting stud for the IO-RL quick-change coupler equipped with a notched stainless steel hex for added weight handling capacity. 1\/4\"-20 thread.\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754341009,"sku":"1182649","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_486152b8-0efb-4f46-b525-d3cb1e16b7fd.jpg?v=1771541744"},{"product_id":"triad-orbit-io-hmm-male-to-male-quick-change-coupler-adaptor","title":"Triad-Orbit IO-HMM Male to Male Quick Change Coupler Adaptor","description":"\u003cp\u003eIO-HMM is a male-to-male IO junction with dual H2 hex heads for connecting female-to-female IO components (i.e. Triad stands and Orbit booms to IO-C clamps, IO-W wallplates and T-ES shafts).\u003c\/p\u003e","brand":"Triad-Orbit","offers":[{"title":"Default Title","offer_id":37754341265,"sku":"1182650","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/files\/media_a39c0f7e-7b6b-4622-b77f-b4f68bff504a.jpg?v=1771539034"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1835\/6187\/collections\/MicrophoneStands.jpg?v=1552593206","url":"https:\/\/daleproaudio.com\/collections\/microphone-stands.oembed?page=9","provider":"Dale Pro Audio","version":"1.0","type":"link"}