Contact Our Expert Sales Team:

888-462-7828

DBX 286s Silver Mic Pre-Amp with Compressor, De-Esser, Expander/Gate and Enhancer

 
  • Dale #:

    DBX-286S
  • Availability:

    In Stock
  • Available for immediate shipment or pick-up from our Jamaica, NY warehouse. In-store pick-up is available Monday through Friday 8:30 am to 5:30 pm.

Description

The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic ... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy® compressor to transparently smooth out uneven acoustic tracks or deliver that classic in your face vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4 TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to loop out to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination.

The cost and hassle of patching together multiple processors for use on one track can be frustrating. The dbx 286s provides you with all the mic processing you need in one box, with the shortest, cleanest signal path to keep your music sounding its best!

Features:

  • Studio quality Mic Preamp/Channel Strip Processor
  • Classic dbx Compression puts great sound within easy reach
  • Frequency tunable De-Esser reduces sibilance and high frequency distortion
  • Enhancer increases the detail and definition of the high and low frequencies
  • Program adaptive Expander/Gate
  • Insert jack allows you to add an external processor
  • Full compliment of meters and status LEDs
  • +48V Phantom Power
  • Precision detented controls

More +

Product Specs

MIC INPUT
Connector XLR
Type Floating balanced, Pin 2 Hot
Impedance ~4.2kΩ
Max Level 0.25Vrms, Gain = 30dB
Gain Adjustment
Range
0dB to +60dB
Phantom Power +48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistors
CMRR >40dB, typically 55dB
EIN -125dBu, 22Hz-22kHz, 150Ω source impedance
LINE INPUT
Connector 1/4" TRS
Type Floating balanced, TIP Hot
Impedance 10kΩ unbalanced, 20kΩ balanced
Max Level >+21dBu, balanced or unbalanced
Gain Adjustment
Range
-15dB to +45 dB
CMRR >40dB, typically 55dB
INSERT
Connector 1/4" TRS
Type Normalled; tip is Send, ring is Return
Ring Impedance >5kΩ
Ring Max Level >+21dBu
Tip Impedance 100Ω
Tip Max Level >+21dBu, >+20dBm (600Ω load)
Noise <-89dBu, unweighted (20Hz-20kHz); LINE GAIN Control set to 0dB
Distortion <0.01% THD, 20Hz-20kHz, +10dBu
LINE OUTPUT
Connector 1/4" TRS Balance/Unbalanced
Type Impedance-balanaced/unbalanced, RF filtered
Impedance Balanced 100 ohm, unbalanced 200 ohm
Max Output Level >+21dBu, >+20dBm (600Ω load)
Gain Adjustment Range -30dB to +10dB
Noise <-80dBu unweighted (20Hz-20kHz); Both Gain Controls
set for 0dB, all processing controls OFF
Frequency Response 20Hz to 20kHz, +0.5/-0.5dB
Distortion <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFF
COMPRESSION
Threshold Range -40dBu to +20dBu
Threshold Characteristic OverEasy®
Compression Ratio >4:1 For input levels beyond 20dB above threshold
Maximum Compression 30dB
Attack Time Program-Dependent; >1s for small level increases,
down to 10ms for larage increases
Release Time Program-Dependen; adjustable between approximately 1dB/sec and 75dB/sec
Distortion Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0
SMPTE Intermodulation Distortion <0.05%; 60Hz/7kHz 4:1, 15dB G/R, +10dBu Output Level, DENSITY @ 0
EXPANDER/GATE
Threshold Range OFF to +15dBu
Expansion Ratio 1.5:1 to 10:1
Maximum Depth >50dB
Attack Time Program-Dependent, approximately 2mS 
(at maximum attenuation)
Release Time Program Dependent, approxiamtely 10mS/dB
Dynamic Range Typically 105dB
DE-ESSER
Characteristic Wideband Gain Reduction
Frequency Range 800Hz to 10kHz High Pass, 12dB/octave
Release Time Program Dependent approximately 1ms/dB
ENHANCER
HF Detail Characteristic Program-controlled shelving equalizer, approximately 15dB maximum HF boost
LF Detail Characteristic Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1
POWER SUPPLY
Operating Voltage 100VAC-240VAC 50/60Hz
Power consumption 15W
Mains Connection IEC receptacle
Operating Temperature 32°F to 113°F (0°C to 45°C)
PHYSICAL
Weight Net weight: 4.5 lbs. (2.04 kg) Shipping weight: 6.54 lbs. (2.97 kg)
Dimensions 1.75 x 5.75 x 19 (4.5 cm x 14.6 cm x 48.5 cm

More +

Shipping Rate Calculator

 

Also Popular