Dale #:
ASHL-FA1254Availability:
Not in Stock - Reserve YoursThis item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.
Description
The FA Series is designed for easy and flexible placement, going where other amps cannot: under conference tables, behind displays, inside kiosks... anywhere high-quality, reliable power is needed, but space is limited. The 1/2 RU FA-125.2 and FA-125.4 offer 125W of efficient Class D power per ch... Read MoreRetail Price: $874.00 Our Price: $699.00
Free Shipping (Continental US)
Suggested Accessories
Description
The FA Series is designed for easy and flexible placement, going where other amps cannot: under conference tables, behind displays, inside kiosks... anywhere high-quality, reliable power is needed, but space is limited.
The 1/2 RU FA-125.2 and FA-125.4 offer 125W of efficient Class D power per channel (x 2 on the 125.2 and x 4 on the 125.4). With selectable Low Z or Hi Z operation, they're capable of powering low-Z, full range speakers as well as 70V and 100V distributed speaker systems.
Where additional power is needed, the full 1 RU, 4 x 250W FA-250.4 (also designed for Hi/Low Z) delivers seriously high power-density in a 1U package.
The FA-125.2 and FA-125.4 can share power between channel pairs up to a total of 250W total per pair. So a system may be designed with a180W load on\ one channel and 70W on the other. Or if a single channel only is driven, 250W can be output to drive a heavier load such as subwoofer.
Features:
More +
Product Specs
Output Power | 2 Ohm: Not Recommended 4 Ohm: 125W 8 Ohm: 125W 16 Ohm: 125W 70V: 125W 100V: 125W |
Power Sharing | Yes x 2 (up to 250W) |
Frequency Response (±0.05dB) | 20HZ-20kHz |
S/N Ratio (20Hz-20kHZ, unweighted) | 102dB |
Input Sensitivity | –10dBV (0.316Vrms)/+4dBu (1.228Vrms), Selectable |
THD + Noise | <0.5% |
Damping Factor (8 Ohms < 1kHz) | >250 |
Power Consumption (1/8 full power, 1kHz sine-wave on all channels, in Watts) | Sleep: <0.5W Idle Lo-Z: 15W Idle Hi-Z: 25W 1/8 Power (4 Ohms): 104W 1/8 Power (8 Ohms): 96W 1/8 Power (70V): 101W 1/8 Power: (100V): 96W |
Thermal Dissipation (BTU/hour with typical input,all channels driven, 120VAC) | Sleep Mode: <1.7 BTU Idle Lo-Z (no signal): 52 BTU Idle Hi-Z (no signal): 85 BTU 1/8 max power, 4 Ohm: 144 BTU 1/8 max power, 8 ohms: 116 BTU 1/8 max power, 70V: 133 BTU 1/8 max power, 100V: 116 BTU |
Voltage Gain(per output mode and input sensitivity setting, in dB) | Low Z @ –10dBV: 43.1 Hi-Z 70V @–10dBV: 46.9 Hi-Z 100V @ –10dBV: 49.1 Low Z @ +4dBu: 31.3 Hi-Z 70V @ +4dBu: 35.1 Hi-Z 100V @ +4dBu: 37.3 |
HPF | Yes. 80Hz (in HiZ Mode, non-defeatable) |
Clip Limiter | Yes (at clip threshold +24dBu, non-defeatable) |
Connectors | Input: Removeable Euroblock/Balanced 6-pole (pr) Output: Removeable Euroblock/2-pole (per ch) GPIO: Removeable Euroblock/ 6-pole DC volume per channel pair, Standby, Fault Out USB: USB-C for Firmware update |
DIP Switches | 1 HiZ/LowZ Ch 1 2 HiZ/LowZ Ch 2 3 Not Used HiZ/LowZ Ch 3 4 Not Used HiZ/LowZ Ch 4 5 70/100V 6 Input Sensitvity (–10/+4dB) 7 Standby Polarity (NO/NC) 8 Front Panel Lockout |
Front LED (per channel) | Green: Signal Present, Yellow: Limit (+24dbu), Red: Mute/Protect |
Front LED (Main) | White-On, Blink (0.5Hz)-Standby, Dark-Off |
Pre-Sleep Mode | >15 minutes inactivity, all channels muted, wake-on-audio |
Sleep Mode | >29 minutes inactivity, power LED blinks every two seconds, wake-on-audio |
Standby Mode | Contact closure activated,power LED flashes evenly @1Hz |
Remote Control Options | WR-1, WR-1.1 DC level control |
Cooling | Adaptive Fan Cooling (side -to-rear venting) |
Amplifier Protection | Over-temperature, output DC, output over-power, AC mains voltage, mains fuse |
Standby Switch | Soft Switch w/ LED backlight |
Power Connector | IEC |
Attenuators | Recessed Front panel Input Level (per ch) |
Power Supply | 100-240VAC, 50-60Hz |
Minimum Startup Voltage | 85VAC@ 120V nominal, 170VAC@ 240V nominal |
Environmental | 32°F-104°F, (0°C-40°C) non-condensing |
Safety Compliance | ULg, CE, FCC Class B, RoHS |
Unit Weight | 5.36 lbs |
Unit Height | 1.72 in. |
Unit Width | 8.66 in. |
Unit Depth | 13.3 in. |
Shipping Weight | 7.14 lbs |
More +
Also Popular
Talk To Our Sales Professionals:
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Questions or concerns about your order?
Info
Resources
Payment Options
© 2024 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.