NanoAmps from ATI are a compact, convenient and rugged series of low cost mixers and utility amplifiers featuring professional XLR type connectors, high performance, low noise circuitry and quiet, UL and CE approved remote power modules. Use them free standing, stack them or rack mount one, two or three across in only 1-¾ inches.
Features:
OUTPUT LEVEL | +22dBm MAX, +4dBm Nominal into 600 ohm balanced or unbalanced lines Output is selectable +4dBm (Line) or -50dBm (Mic). |
FREQUENCY RESPONSE | +0/-.5dB 20Hz to 20kHz MX101 only: Switchable low cut filters -15dB @ 20 Hz, -3dB @ 125 Hz |
DISTORTION | .5% THD Maximum 20Hz to 20kHz at +20dBm |
NOISE | MIC Input: EIN = -124dBm, 54dB gain LINE Input: EIN = -88dBm, 14dB gain 20Hz to 20kHz measurement bandwidth. |
GAIN | MIC: 52, 72 & 92dB; LINE: 32 & 42dB Gain of each input is selectable. XP100: MIC: 40dB; LINE: 0dB |
HEADPHONE OUTPUT | 100mW to 600/150 Ohm Headphones, TRS Jack |
LIMITER | 5:1 SLOPE, Attack time 50ms, Recovery time 300ms for 10dB change |
PHANTOM POWER | +20VDC regulated @ 4ma through paralleled 3.32K Ohm resistors PH48-1 48VDC phantom power available as an option |
POWER | 22 to 30 VDC. 24VDC Nominal. MX @ 120 mA, XP @ 70 mA; See Power Supplies and other DC voltage options: See Accessories. |
DIMENSIONS | 1.75" H X 5.6" W X 5.75"D; 1.50 lbs. |
MOUNTING | 21075-501 Free standing or rack mountable; one, two or three units in 1-3/4" |
CONNECTORS | Standard XLR female inputs and XLR male outputs. |
CUE (DIRECTOR INPUT) | Unbalanced -10dBu, 2.5 mm TS jack. |