Attero Tech unD6IO Dante Wall Plate 4x2 Multi I/O Interface (UDP 3rd Party Control) - Black


Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:ATTE-90000190BU

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The unD6IO Dante Audio interface is 4x2 Dante multi-I/O wall plate interfaces designed for in-wall installation into 2 gang US junction boxes. Its form-factor and I/O density make it easy to put Dante connectivity close to audio sources used in professional AV installations - thereby eliminating costly and interference prone analog wiring, power supplies and giving a clean, finished look to an AV installation all while providing the superior audio system flexibility with Dante audio networking. The unD6IO features two balanced line-level inputs on XLR connectors. Each input features a software controlled mic preamp with software switchable 48V phantom power. The unD6IO also features two sets of stereo line-level audio connections for consumer audio device connectivity. The RCA inputs (IN 3/4 A) and 3.5mm stereo input (IN 3/4B) are software selectable to be used as two independent stereo inputs, or summed.

  • Audio Inputs


    Input Types

    Two Balanced and RF filtered inputs on XLR (Inputs 1/2)

    Stereo Unbalanced Inputs on RCA (Inputs 3/4 A)

    Stereo Unbalanced Inputs on 3.5mm TRS (Inputs 3/4 B)


    -18dB, -3dB, +25dB and +40dB, software selectable (Inputs 1/2)

    Input Impedance

    >1.8K Ohms at any gain (Inputs 1/2)

    >10k Ohms (Inputs 3/4 A & B)

    Maximum Input Levels

    +20dBu @ -18dB gain, +6dBu @ - 3 dB gain, -23dBu @ +25dB gain -38dBu @ +40dB gain (Inputs 1/2)

    +12 dBu ( Inputs 3/4 A & B)

    Phantom Power

    +48V, software selectable (Inputs 1/2 only)

    Audio Outputs


    Output Type

    Two balanced line level with automatic muting on loss of Dante signal on 6-pin Depluggable Phoenix (Outputs ½ B)

    Two unbalanced line level outputs on stereo 3.5mm TRS (Outputs ½ A)

    Attenuation Range

    Software controlled volume (0 to -60dB, 1dB increments)

    Output Impedance

    200 Ohms balanced, 100 Ohms unbalanced

    Maximum Output Levels

    +12 dBu at 0dB attenuation (Output 1/2 A)

    +20dBu at 0dB attenuation (Output 1/2 B)

    Dante Network  
    Physical Level Standard Ethernet
    Connector Single RJ-45
    Cable Quality CAT-5e or better
    Transmission Speed 100 Mbps
    Supported Sample Rates 44.1kHz 48kHz
    Minimum Dante Network Latency 1 ms









    0.6 lbs

  • Shipping rates calculator