|Frequency Response (All filters set for minimum action) ||DIGITAL-DIGITAL: 20Hz-9.75kHz +/-0.1dB |
ANALOGUE-ANALOGUE: 30Hz-9.75kHz +/-0.5dB
|Noise ||DIGITAL-DIGITAL (rms 20Hz-20kHz): <-110dBFS |
ANALOGUE-ANALOGUE: (rms 20Hz-20kHz): <-75dB ref: Limit point +8dBu
|Distortion ||DIGITAL-DIGITAL (6dB limiting): <-90dB / 0.003% THD |
ANALOGUE-ANALOGUE (6dB limiting): <-70dB / 0.03% THD
|Inputs ||ANALOGUE: Active balanced, 10k (bridging), standard operating level -6dBu to +14dBu (clip +22dBu) |
DIGITAL: AES-3 (XLR); 32, 44.1, 48, 88.2, 96kHz sample rate. 16, 20, or 24 bits
|Output ||ANALOGUE: Active true balanced, standard operating level -6dBu to +21dBu |
DIGITAL: AES-3 (XLR); full input rate / half rate
|Processing blocks ||High-Pass: 3dB Frequencies 3Hz [DC block], 20Hz, 30Hz, 45Hz, 75Hz, 90Hz, 135Hz, 150Hz, 180Hz. |
Phase Rotator: Cancels asymmetry in certain programme material
Gated AGC: Capture range 40dB (+/-20dB); maximum positive gain can be set.
Advanced AGC enables faster, programme-dependent operation.
Compressor: Nominal 2:1 slope
Presence Enhancer: Boosts selected frequencies for intelligibility and / or brightness.
Limiter: look-ahead limiters plus NCDCS anti-aliasing clipper.
Low-Pass Filter: Cut-off frequency 4.5kHz, 5kHz, 5.5kHz, 6kHz, 7.5kHz, or 10kHz NRSC compliant
HF Limiter: 50us or modified 75us (NRSC) emphasis curve
|Control ||Setup is via PC GUI only. Select a factory preset, modify it, set levels etc, save to Flash memory. |
USB on front panel, plus RS-232 on rear panel. ASCII Text based command format. Choice of ‘Easy’ mode (simplified, with Wizard), or Expert mode for GUI control.
|Power ||100 – 240V AC Nominal (acceptable range 88V to 264V AC) / 6 Watts |
|Dimensions & weight ||1-RU: 44 x 482 x 290mm deep / 1.75” x 19” x 11.25” deep. Weight: 1.8kg / 4lbs |
|Computer Control ||Every processing parameter, including all thresholds and time constants, can be accessed and modified under PC control (GUI included) |
|Warranty ||3 year return-to-base warranty |
|Approvals ||CE (EMC & LVD), RoHS |