Have a Question? Contact Us

888-462-7828 Live Chat

Audio-Technica AT4050ST Multi-Pattern Stereo MS Studio Condenser Microphone

 
  • Dale #:

    AUDI-AT4050ST
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock, but we can usually ship it within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

AT4050ST Stereo Condenser Microphone Offering the realism of a live sound field, the AT4050ST is a side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement. This innovative stereo condenser allows sound recordists the choice of selecting a left-right ... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

AT4050ST Stereo Condenser Microphone Offering the realism of a live sound field, the AT4050ST is a side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement. This innovative stereo condenser allows sound recordists the choice of selecting a left-right stereo output or choosing discrete Mid-Side signals for later manipulation, a remarkable flexibility. The microphone's dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range. Its transformerless circuitry virtually eliminates low-frequency distortion.

Features:
  • Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
  • Independent cardioid and figure-of-eight condenser elements
  • Switch selection of Mid-Side mode and two internally matrixed stereo modes
  • Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation

More +

Product Specs

ELEMENTExternally-polarized (DC bias) condenser
POLAR PATTERNCardioid and Figure-of-eight
FREQUENCY RESPONSE20-18,000 Hz
LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITYStereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa
Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa
Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa
Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
IMPEDANCE50 ohms
MAXIMUM INPUT SOUND LEVELMid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal)
NOISEStereo 90°: 25 dB SPL
Stereo 127°: 16 dB SPL
Mid: 15 dB SPL
Side: 17 dB SPL
DYNAMIC RANGE (typical)Mid: 134 dB, 1 kHz at Max SPL
Side: 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIOStereo 90°: 69 dB, 1 kHz at 1 Pa
Stereo 127°: 78 dB, 1 kHz at 1 Pa
Mid: 79 dB, 1 kHz at 1 Pa
Side: 77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS48V DC, 6.4 mA typical (both channels total)
SWITCHES90°, 127°, M-S;
Flat, roll-off;
10 dB pad (nominal)
WEIGHT517 g (18.2 oz)
DIMENSIONS193.0 mm (7.60) long,
53.4 mm (2.10) maximum body diameter
OUTPUT CONNECTORIntegral 5-pin XLRM-type
CABLE5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHEDAT8449 shock mount for 5/8-27 threaded stands; 5/8-27 to 3/8-16 threaded adapter; microphone dust cover; protective carrying case
AUDIO-TECHNICA CASE STYLER1

More +

Shipping Rate Calculator

 

Also Popular