Audio-Technica M3T Wireless In Ear Monitor Transmitter (M Band)

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:AUDI-M3TM

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • Audio-Technica’s advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica’s versatile Personal Mix Control, which allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

    Features

    • High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
    • 1321 selectable UHF channels with automatic frequency scanning
    • Up to 16 simultaneous systems per frequency band
    • Three receiver modes: Personal Mix, stereo, and mono
    • Personal Mix Control allows volume and mix control of two independent signals at the receiver
    • LCD information display offers step-through menus for setting preferences
    • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
    • Adjustable squelch eliminates annoying static
    • Pilot tone protects against RF interference when transmitter is turned off
    • Multi-level limiter (defeatable) helps protect hearing from sudden peaks
    • Portable system is quick to load and set up
    • Reduces on-stage audio clutter for better overall mix & less feedback
    • Use any number of Stereo Receivers (with individual mixes) on the same frequency
    • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
    • Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips
    • Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input
  • RF POWER OUTPUT10 mW/50 mW (switchable), 50 ohms
    Limited to 10 mW within 863 MHz to 865 MHz
    Following national regulations
    SPURIOUS EMISSIONSFollowing federal and national regulations
    INPUT CONNECTIONSXLRF-type/6.3 mm stereo (1/4") combination connector
    Pin 1 and Sleeve: Ground
    Pin 2 and Tip: Hot
    Pin 3 and Ring: Cold
    MAXIMUM INPUT LEVELXLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu
    6.3 mm (1/4") mono, unbalanced: +26 dBu
    LOOP OUTPUT CONNECTORXLRM-type connector
    Pin 1: Ground
    Pin 2: Hot
    Pin 3: Cold
    POWER REQUIREMENT12-18V DC, 600 mA
    HEADPHONE OUTPUT CONNECTOR6.3 mm (1/4") TRS stereo phone jack
    HEADPHONE OUTPUT POWER120 mW at 32 ohms
    ANTENNA CONNECTORBNC, 50 ohms
    DIMENSIONS210.0 mm (8.30") W x 132.0 mm (5.20") D x 44.0 mm (1.70") H
    NET WEIGHT930 g (32.8 oz), without accessories
    ACCESSORIES INCLUDEDAC adapter (country dependant); rack mount adapters; flexible antenna
  • Shipping rates calculator