Dale #:
BIAM-DESONOD4LPKITAvailability:
Not in Stock - Reserve YoursThis item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.
Description
D4LP is the D4 coaxial design in a low profile back can for use when clearances above the ceiling are minimal. The D4 has a wider dispersion than the larger models. The high performance D4 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequ... Read MoreOur Price: $420.00
Shipping Charges Apply
Suggested Accessories
Description
D4LP is the D4 coaxial design in a low profile back can for use when clearances above the ceiling are minimal. The D4 has a wider dispersion than the larger models. The high performance D4 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.
The D SERIES offers powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. Each D SERIES ceiling model includes everything needed for standard installations, and has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.
AMPLIFIED LOUDSPEAKER CONTROLLERS
Community ALC404D is recommended for this product. Higher power ALC models may be used safely as well.
Features:
Applications:
More +
Product Specs
Loudspeaker Type | Two-way, full-range, coaxial ceiling loudspeaker, 8 ohm or 70V/100V operation |
Operating Range | 90 Hz - 18.5 kHz |
Frequency Response | 120 Hz - 16 kHz (±5 dB) |
Max Input Ratings (8 ohm) | 60W continuous, 150W program 22 volts RMS, 49 volts momentary peak |
Transformer Taps—70V: 100V: | 30W, 15W, 7.5W, 3.75W and low impedance 30W, 15W, 7.5W |
Distortion—10% Full Power: 500 Hz 2 kHz 8 kHz 1% Full Power: 500 Hz 2 kHz 8 kHz | 2nd Harmonic 0.18% 1.21% 0.38% 2nd Harmonic 0.16% 0.38% 0.22% 3rd Harmonic 0.80% 0.39% 0.13% 3rd Harmonic 0.27% 0.28% 0.16% |
Sensitivity (1W/1m) | 92 dB SPL (160 Hz to 12.5 kHz 1/3 octave bands) 93 dB SPL (250 Hz to 4 kHz speech range) |
Maximum Output | 110 dB SPL / 116 dB SPL (peak 8 ohm) |
Nominal Impedance | 8 ohms |
Minimum Impedance | 7.6 ohms @ 330 Hz |
Nominal Coverage | 130º conical (1 kHz to 6 kHz) 140º conical (500 Hz to 6 kHz) |
Axial Q / DI | 4 / 6, 500 Hz to 6 kHz |
Crossover Frequency | 2 kHz |
Recommended Signal Processing | 90 Hz high pass filter |
Drivers | LF 1 x 4.5-inch HF 1 x ¾-inch exit compression driver |
Driver Protection | Self-resetting solid state circuit breaker |
Input Connection | 4-position Euroblock connector |
Controls | Front-face wattage / low impedance selector switch |
Enclosure | Corrosion-resistant zinc plated steel |
Mounting/Rigging Provisions | 3 steel mounting clamps with 2-inch grip range |
Grille | Powder coated steel with safety line, white finish, paintable |
Baffle | Reflex loaded UL 94V-0 rated ABS |
Safety Features | 3 x safety hang points |
Safety Agency Ratings | ETL listed to comply with UL1480, UL2043 and CSA60065. Suitable for use in air handling spaces per NFPA 70 and NFPA 90. |
Required Accessories | Electronic high pass filter |
Supplied Accessories | C-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template, flat screwdriver |
Optional Accessories | D45-CATR Can Adapter Ring / Trim Ring D45-NCB New Construction Bracket D-RAIL48-PR Pair of 48” Channel Rails |
Dimensions—Width | 9.768 inches (248.1 mm) bezel diameter |
Depth | 3.599 inches (91.4 mm) can depth |
Cutout Diameter | 8.75 inches (222 mm) |
Weight | 6.6 lbs (3 kg) |
More +
Also Popular
Got Questions?
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Company
Payment Options
Info
Resources
Payment Options
© 2023 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.