Have a Question? Contact Us

888-462-7828 Live Chat

Biamp ZONE4 - Four-Zone Mixer and Preamplifier

 
  • Dale #:

    BIAM-ZONE4
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock, but we can usually ship it within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect. There is also the possibility to assign 3 microphones to each zone where MIC1 can be a... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.

There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 / 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. These control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.

On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.

The unit is 19-inch format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.

More +

Product Specs

19" (483 mm wide) rack mounting yes
height- rack units (1U=44 mm) in U 1
depth (build in) in mm 196
depth (incl front) in mm 205
power supply 115 - 230 VAC
power consumption (max) in watts 25
zone outputs 4 stereo
output level balanced (dB) 0
output level unbalanced (dB) 0
S/PDIF output no
signal to noise level SNR (dB) >90
total harmonic distortion TBH (%) <0.02
crosstalk (dB) >75
music level control yes
source selection per zone yes
VCA level control no
MIC inputs unbalanced 0
MIC inputs balanced 3
Phantom power voltage in volts 18
inputs with Phantom power 2
selectable input dynamics no
noise gate on MIC no
selectable output dynamics no
line input balanced 0
S/PDIF input no
line input unbalanced 4 stereo
RS232 (serial communication port) yes
tone control yes
priority input contact yes
wall panel controls yes
chime no
maximum qty paging Mics 4
priority output contact no
emergency input yes
frequency response (in Hz) 20 - 30 k
priority levels 2
applicable low impedance yes
applicable in 100V yes
Net weight product (kg) 2.75

More +

Shipping Rate Calculator

 

Also Popular