Contact Our Expert Sales Team:
888-462-7828Dale #:
BOSE-3618131110Availability:
In StockAvailable for immediate shipment or pick-up from our Jamaica, NY warehouse. In-store pick-up is available Monday through Friday 8:30 am to 5:30 pm.
Description
The Bose® PowerMatch PM4500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an exp... Read MoreSuggested Accessories
Description
The Bose® PowerMatch PM4500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation-all in a reliable, proprietary design.
The PM4500N adds Ethernet connectivity for network control and monitoring of multiple "N" version amplifiers.
Features:
Applications:
More +
Product Specs
Power Rating | |
2 Ω | Mono Mode: 450 W V-Bridge Mode: 450 W I-Share Mode: 1000 W Quad Mode: 1000 W |
4 Ω | Mono Mode: 500 W V-Bridge Mode: 1000 W I-Share Mode: 500 W Quad Mode: 2000 W |
8 Ω | Mono Mode: 300 W V-Bridge Mode: 1000 W I-Share Mode: 300 W Quad Mode: 1000 W |
70 V | Mono Mode: N/A - Requires tapping V-Bridge Mode: 800 W I-Share Mode: Not available Quad Mode: 1600 W |
100 V | Mono Mode: N/A - Requires tapping V-Bridge Mode: 1000 W I-Share Mode: Not available Quad Mode: 2000 W |
THD for Power Rating |
2 Ω: < 0.1 % 4 Ω: < 0.1 % 8 Ω: < 0.1 % 70 V: 1 % 100 V: 1 % |
Maximum Rated Power | 2000 W (250 W x 8 channels at 4 ohms) |
Peak Output Voltage | 71 / 142 V (Mono / V-Bridge, I-Share, and Quad modes) |
Voltage Gain | 33 / 36 / 33 / 36 dB (Mono / V-Bridge / I-Share / Quad modes) |
Audio Performance Specifications | |
Frequency Response | 20 Hz - 20 kHz (at 1 W and +/- 0.5 dB) |
Signal-to-Noise Ratio, Analog Input | > 102 dB (1 dB below rated power, A-weighted) |
THD | < 0.4 % (at 1 W, 20 Hz to 20 kHz) |
Intermod Distortion - SMPTE | < 0.4 % (60 Hz, 7 kHz) |
Channel Separation (Crosstalk) | > 65 dB (adjacent channels, at 1 kHz) |
Damping Factor | > 1000 (10-1000 Hz, 4 ohms, at amplifier output) |
Integrated DSP | |
A/D and D/A Converters | 48 kHz / 24-bit |
Total Latency (Analog In - Amp Out) | < 0.95 ms |
Input to Output Signal Routing | 8 x 8 matrix |
Loudspeaker Presets | Bose Professional |
Input EQ | 5-band PEQ (+/- 20 dB), notch, shelving, high pass, low pass |
Bandpass Filters (Crossover) | Butterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octave |
Loudspeaker EQ | 9-band PEQ (+/- 20 dB), shelving, high pass, low pass, 2-band RoomMatch® array EQ |
Maximum Output Delay | 3 s |
Output Limiter | Peak and RMS voltage |
Audio Inputs | |
Input Channels | 8 balanced line level |
Input Impedance | > 100 kΩ |
Sensitivity | 0, +4, +12, +24 dBu, selectable |
Maximum Input Level | +24 dBu (at 24 dBu sensitivity setting) |
Connectors, Input | 3-pin Phoenix Contact® (green color; part # 1776168) |
Audio Outputs | Output Channels 2 to 8 (configurable) |
Connectors, Output | 8-pin Phoenix Contact® connectors (part # 1778120), supports 10-24 AWG wire |
Indicators and Controls | |
LED Status Indicators | Signal, limit, clip, fault |
User Interface Controls | Mute, input sensitivity, output configuration, output attenuation, EQ on/off, preset select. 240 x 64 LCD. Additional controls available w/ControlSpace® Designer™ software |
Electrical Specifications | |
Mains Voltage | 100-240 V (50/60 Hz) |
Mains Circuit Recommendation | 20A (120 V) or 16A (230 V) |
Mains Connector | IEC 60320-C20 (Inlet) |
Minimum AC Line Voltage | 80 V (reduced output power) |
Maximum Inrush Current | 15.4 A (230 VAC, 50 Hz) |
Maximum RMS Current Draw | 15 A |
Efficiency, 1/3 Rated Power | > 75 % (pink noise input signal) |
Output Stage Topology | Class-D |
Overload Protection | High temperature, DC, HF, short, voltage limiter, current limiter, inrush current, mains circuit breaker protection |
Physical | |
Dimensions | 3.5" H x 19" W x 20.7" D (88 mm x 483 mm x 525 mm) - 2 rack space |
Net Weight | 24.4 lb (11.1 kg) |
Shipping Weight | 30.0 lb (13.6 kg) |
Mounting Depth | 21" (533 mm) |
Operating Temperature | 32 °F - 104 °F (0 °C - 40 °C) |
Cooling System | Microprocessor-controlled, variable-speed fans, front to rear airflow |
More +
Also Popular
Talk To Our Sales Professionals:
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Questions or concerns about your order?
Info
Resources
Payment Options
© 2024 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.