Availability: Usually ships in 5 - 10 Days
The PS602P is a 2-channel portable amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output. Onboard configurable loudspeaker processing eliminates the need for an additional signal processor in many installations, while outstanding audio performance and reliability are assured with patented technologies inherited from the field-proven PowerMatch® line. This unique set of features and technologies makes PowerShare one of the most versatile high-performance amplifiers available.
Patented PowerShare technology allows the total 600 watts of power to be shared asymmetrically across all outputs, as each output is capable of delivering full power. Instead of selecting amplifier power based on the needs of the largest zone, installers now have the freedom to use total amplifier power in the application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
Each channel can be configured for low-impedance (4-8 ?) or high-impedance (70/100V) applications without bridging, use of jumpers, or software settings.
The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch® amplifier line, improves performance and reliability through continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion, while protecting loudspeakers.
Integrated Loudspeaker Processing with Optional PowerShare Editor Configuration
For applications requiring additional signal processing the PowerShare Editor Software offers real-time selection and control of Bose loudspeaker EQs, 9-band PEQs, mixing, crossover, limiters, delay, and mute/output polarity through a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker equalization and protection per output channel. These features eliminate the need for an external signal processor in many applications.
Designed to save power consumption when not in use. PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls
below a set threshold, then wake when audio returns.
|Amplifier Power||2 x 300 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)|
|Maximum Power per Channel||600 W @ 4-8 Ω, 70/100V|
|Gain (Low-Z mode)||44 dB, RCA (unbalanced) inputs; 32 dB, XLR/TRS (balanced) inputs|
|Gain (70V mode)||47 dB, RCA (unbalanced) inputs; 35 dB, XLR/TRS (balanced) inputs|
|Gain (100V mode)||50 dB, RCA (unbalanced) inputs; 38 dB, XLR/TRS (balanced) inputs|
|Frequency Response||4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W)
70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
|Channel Separation (Crosstalk)||>85 dB @ 1 kHz, > 65 dB @ 20 kHz|
|Signal to Noise Ratio||100 dB (at rated power, A-weighted)|
|Input Channels||2 unbalanced, 2 balanced|
|Connectors||Stereo RCA, XLR/TRS|
|Input Impedance||10 kΩ (RCA), 20 kΩ (XLR/TRS)|
|Maximum Input Level||20 dBu (at 12 dBu sensitivity setting)|
|Sensitivity||-10 / -2 dBV, RCA inputs; 4 / 12 dBu, XLR/TRS inputs (low / high sensitivity)|
|Connectors||NL4 & binding posts|
|A/D and D/A Converters||24-bit / 48 kHz|
|Processing Functions||Standard mixer, loudspeaker EQ, 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity inversion|
|Loudspeaker Presets||Flat, DS16, DS40, DS100, FS3B, 402, 802, MA12EX, RMU105 and RMU108|
|Audio Latency||1 ms (any input to speaker output)|
|Indicators and Controls|
|Power LED||Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault.|
|Input Signal LED||Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault.|
|Output Limit LED||Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.|
|Controls, Front Panel||Power On/Off, Output Level Control|
|Controls, Rear Panel||Amplifier mode DIP switches, loudspeaker EQ dials|
|Mains Voltage||100 VAC – 240 VAC (±10%, 50/60 Hz)|
|AC Power Consumption||120 VAC: 79 W (Standby), 124 W (Max) 230 VAC: 88 W (Standby), 184 W (Max)|
|Mains Connector||Standard IEC (C14)|
|Maximum Inrush Current||14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz)|
|Protections||High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage|
|Dimensions (H x W x D)||44 mm x 483 mm x 414 mm (1.7” x 19.0” x 16.3”)|
|Shipping Weight||6.9 kg (15.3 lb)|
|Net Weight||5.5 kg (12.2 lb)|
|Cooling System||Microprocessor controlled, variable speed fans, left to right air flow|
|Inputs (Control)||USB input for configuring the amplifier with PowerShare Editor software. Mute input control.|
Get over 100,000 free radio stations, shows, and podcasts, all for free. And you can tune in without turning on your computer: browse for stations, or type in specific call letters or a radio host you love. Sonos works seamlessly...View full product details
The ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments. The line-level output is capable of driving either high or low impedance, balanced or...View full product details