Availability: Usually ships in 5 - 10 Days
Our Price: $355.00
The Clear-Com SMQ-1 Quecom is an inexpensive single channel, full-duplex and lightweight wired intercom beltpack / headset combo, with a portability and functionality designed for quick setup.
The SMQ-1 Quecom consists of the SMQ-1 single-sided and noise-isolating headset, which is permanently wired to the accompanying belt-pack. The headset features a noise-cancelling dynamic microphone on an adjustable boom, with a frequency response tailored to optimize speech clarity. The all-metal belt-pack with microphone and headphone amps is equipped with an attached 5 foot XLR-F cable, on/off switch for the microphone, and a side-mounted volume control wheel.
For use with the Que-Com PK-5 Power Supply Unit (not included)
AUDIO QUALITY :Que-Com intercom systems provide clear, intelligible audio quality, allowing the users to give cues and direction, and be able to understand each other, even when the event is loud. The system's wide frequency response is specially contoured for voice, so that conversations are distinct and messages do not have to be repeated. Que-Com systems have low self-noise, so electronic hiss will not interfere with or mask the voices. And its high volume capability, combined with low distortion, allow system users to converse comfortably and intelligibly even when the facility is quite noisy.
INTERCOM ELECTRONICS :The intercom electronics include a microphone pre-amplifier and a headphone amplifier. These circuits are enclosed in a rugged die-cast metal beltpack, with a steel belt clip, providing excellent durability and longevity. A volume control allows the user to maintain a comfortable listening level in any setting. The microphone on/off switch gives users control over when they want to speak to others on the intercom line. The headset is permanently attached to the beltpack. A cable from the pack attaches the unit to the power supply and the other intercom beltpack/headsets in the system via standard mic cable.
THE POWER SUPPLY: The PK-5 (not included) power supply has the capacity to power up to 30 SMQ-1 or DMQ-2 headsets. It supplies 24 volts DC at .4 amp to the system. The fully regulated, current-limited unit also provides proper termination for the intercom system. The PK-5 (not included) features both short-circuit and reverse-polarity protection. The power supply is housed in a rugged metal chassis. Three separate 3-pin XLR connectors are provided for intercom audio and power output to the headset stations. Use Y-type line splitters on these connectors to attach additional headsets to the system. The PK-5 (not included) power supply is UL and CSA listed.
SIMPLE SETUP AND OPERATION :Simply plug the PK-5 (not included) into a standard AC power outlet, attach the headset stations to it using standard mic cable, and begin talking. Users adjust the volume levels of their headsets to their personal preferences.The ideal portable intercom unit, a person can rapidly set up for an event,and easily take it down when done. Que-Com is equally at home in more permanent settings.
|Amplifier Type||Solid state, IC amplifiers, current-limited with reverse-polarity and short-circuit protection|
|Signal-to-noise Ratio||65 dB|
|Distortion||<0.5% THD @ 1 kHz|
|MIC Pre-amp Frequency Response||200 Hz - 10 kHz, contoured for enhanced vocal intelligibility|
|Microphone Type||Dynamic, noise-rejecting|
|Headphone Frequency Response||200 Hz - 12 kHz|
|Sound Pressure Level||110 dB SPL max|
|Controls & Connector||Mic on/off switch and headphone volume control; cable terminates in female XLR 3-pin connector|
|Power Requirements||Talk: 10 mA average
Voltage Range: 12-32 VDC
|Headset Weight||8.5 oz (0.24 kg)|
|Beltpack Dimensions||1" H x 3.5" W x 1.5" D (25 x 89 x 38 mm)|