Have a Question? Contact Us

888-462-7828 Live Chat

Crest CC 2800 High Performance Power Amplifier - 1400W Per Ch @ 2 Ohms

 
  • Dale #:

    CRES-CC2800
  • Availability:

    Reserve Yours Now
  • This item usually ships within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

All CC Series amplifiers are built with tunnel-cooled heat sinks, variable-speed DC fans and extensive protection circuitry for superior efficiency into difficult loads and power conditions. In the Crest Audio tradition, these robust amps also boast more power devices (16 per channel) than any co... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

All CC Series amplifiers are built with tunnel-cooled heat sinks, variable-speed DC fans and extensive protection circuitry for superior efficiency into difficult loads and power conditions. In the Crest Audio tradition, these robust amps also boast more power devices (16 per channel) than any competitive amplifier, plus a switched-rail class H output stage and triple-compound design to provide low distortion and excellent thermal stability. Based on powerful Pro 200. Series technology and utilizing a linear power supply, Their three versatile CC Series amps deliver stable high power output for running main systems, monitors and subwoofers.

Features:

  • 8 Ohm Stereo - 595 W
  • 4 Ohm Stereo - 965 W
  • 2 Ohm Stereo - 1400 W
  • 4 Ohm Bridged - 2800 W
  • Toroidal power transformer
  • Magnetic circuit breaker on/off switch
  • Cooled by variable speed fan with back-to-front airflow
  • Mode selector switch for stereo, parallel and bridged-mono operation
  • Inputs: Balanced female XLR, 1/4" TRS combi jacks
  • Outputs: Speakon(r) and five-way binding posts
  • Recessed, stepped attenuators
  • 16-gauge steel chassis, cast aluminum front panel

More +

Product Specs

Rated power bridge mode 4 Ohms:2,800 Watts @ 1 kHz at <0.1% T.H.D.
Rated power bridge mode 8 Ohms2,000 Watts @ 1 kHz at <0.1% T.H.D
Rated power (2 x 2 Ohms)1,400 Watts per channel @ 1 kHz <0.1% T.H.D. both channels driven
Rated power (2 x 4 Ohms):965 Watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven
Rated power (2 x 8 Ohms):595 Watts per channel @ 1 kHz at <0.025% T.H.D. both channels driven
Rated power (1 x 2 Ohms):1,850 Watts @ 1 kHz at <0.1% T.H.D.
Rated power (1 x 4 Ohms):1,150 Watts @ 1 kHz at <0.05% T.H.D.
Rated Power (1 x 8 Ohms):665 Watts @ 1 kHz at <0.025% T.H.D.
Minimum load impedance:2 Ohms
Maximum RMS voltage swing:82 Volts
Frequency response:10 Hz - 100 kHz;+0,-2 dB at 1 Watt
Power bandwidth:10 Hz - 30 kHz; +0, -3 dB at rated 525 Watts 8 Ohm power
T.H.D. (2 x 2 Ohms):<0.15% @ 1,150 Watts per channel from 20 Hz to 20 kHz
T.H.D. (2 x 4 Ohms):<0.1% @ 880 Watts per channel from 20 Hz to 20 kHz
T.H.D. (2 x 8 Ohms):<0.1% @ 560 Watts per channel from 20 Hz to 20 kHz
Input CMRR:>-65 dB @ 1 kHz
Voltage gain:x 40 (32 dB) or x 20 (26 dB)
Crosstalk:>-65 dB @ 1 kHz at rated power @ 8 Ohms
Hum and noise:>-111 dB,“A” weighted referenced to rated power @ 8 Ohms
Slew rate>15V/us
Damping factor (8 Ohms):>500:1 @ 20 Hz - 1 kHz
Phase response:+5 to -15° from 20 Hz to 20 kHz
Input sensitivity:(x 40) 1.7 Volts ±3% for 4 Ohm rated power, 2 Volts ±3% for 1 kHz 2 Ohm rated power
Input sensitivity:(x 20) 1.36 Volts ±3% for 4 Ohm rated power, 4 Volts ±3% for 1 kHz 2 Ohm rated power
Input impedance:15 k Ohms balanced, 7.5 k Ohms unbalanced
Current Draw @ 1/8 power:1,250 Watts @ 2 Ohms; 880 Watts @ 4 Ohms
Current Draw @ 1/3 power:2,905 Watts @ 2 Ohms, 2,200 Watts @ 4 Ohms
Thermal Emissions @ 1/3 power3,579 @ 4 Ohms bridged
ClassSwitched rail, H
Country of manufactureChina
Cooling:Back to front via 2 variable speed fans
Controls:Twin recessed stepped attenuators, circuit breaker power switch, mode select, gain select
Indicator LEDs:2 ACL (clip limiting), 2 signal presence, 2 temp limit, 2 active
Protection:Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors:Combi 1/4” & XLR, Speakon and Binding Post speaker output, 120 Volt 15 amp mains, 240/230 Volt 20 amp IEC mains
Construction:16 ga. steel with cast front panel
Dimensions:89 mm x 482.6 mm x 377.8 mm + 31.8 mm for rear support ears and connectors (3.5” x 19” x 14.875” + 1.25”)
Net weight:18.05 kg. (39.8 lbs.)
Gross weight:19.23 kg. (42.4 lbs.)

More +

Shipping Rate Calculator

 

Also Popular