Have a Question? Contact Us

888-462-7828 Live Chat

Crest PRO 8200 Two-Channel Power Amplifier - 825W Per Ch @ 8 Ohms

 
  • Dale #:

    CRES-PRO8200
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock, but we can usually ship it within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

The Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing exceptionally high power ratings (6500 W bridged on the Pro 9200) in a compact, lightweight (under 25 lbs.) 2U package. The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect ... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing exceptionally high power ratings (6500 W bridged on the Pro 9200) in a compact, lightweight (under 25 lbs.) 2U package. The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect connected drivers; IGM Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled, high efficiency heat sinksl and veriable-speed DC fans to limit the operating temperature and extend amplifier life.

Features:

  • 8 Ohm Stereo - 825 W
  • 4 Ohm Stereo - 1450 W
  • 2 Ohm Stereo - 2250 W
  • 4 Ohm Bridged - 4500 W
  • Dramatically reduced net weight
  • Latest generation of high speed, wide-bandwidth output devices
  • Twin-tunnel cooling with back-to-front air flow
  • Dual, rear-mounted, continuous variable-speed fans
  • Balanced male and femal XLR inputs with switch-configurable XLR polarity and sensitivity selection
  • Speakon(r) and five-way binding post output connectors
  • Front panel circuit breaker switch
  • Modular construction
  • Domestic version has a permanent mount line cord and 30 amp connector

More +

Product Specs

Rated power bridge mode 4 Ohms4,500 Watts @ 1 kHz at <0.1% T.H.D.
Rated power bridge mode 8 Ohms2,900 Watts @ 1 kHz at <0.1% T.H.D.
Rated power (2 x 2 Ohms):2,250 Watts per channel @ 1 kHz <0.1% T.H.D. both channels driven
Rated power (2 x 4 Ohms)1,450 Watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven
Rated power (2 x 8 Ohms)825 Watts per channel @ 1 kHz at <0.025% T.H.D. both channels driven
Rated power (1 x 2 Ohms)2,800 Watts @ 1 kHz at <0.1% T.H.D.
Rated power (1 x 4 Ohms):1,600 Watts @ 1 kHz at <0.05% T.H.D.
Rated Power (1 x 8 Ohms):880 Watts @ 1 kHz at <0.025% T.H.D.
Minimum load impedance:2 Ohms
Maximum RMS voltage swing90 Volts
Frequency response:10 Hz - 100 kHz;+0,-3 dB at 1 Watt
Power bandwidth10 Hz - 50 kHz; +0, -3 dB at rated 1000 Watts 8 Ohm power
T.H.D. (2 x 2 Ohms)<0.2% @ 1,900 Watts per channel from 20 Hz to 20 kHz
T.H.D. (2 x 4 Ohms)<0.15% @ 1,300 Watts per channel from 20 Hz to 20 kHz
T.H.D. (2 x 8 Ohms)<0.15% @ 775 Watts per channel from 20 Hz to 20 kHz
Input CMRR>-85 dB @ 1 kHz
Voltage gain:x 40 (32 dB) or x 20 (26 dB)
Crosstalk:>-70 dB @ 1 kHz at rated power @ 8 Ohms
Hum and noise:>-110 dB,“A” weighted referenced to rated power @ 8 Ohms
Slew rate:>15V/us
Damping factor (8 Ohms)>300:1 @ 20 Hz - 1 kHz
Phase response+5 to -15° from 20 Hz to 20 kHz
Input sensitivity:(x 40) 1.87 Volts ±3% for 4 Ohm rated power, 2 Volts ±3% for 1 kHz 2 Ohm rated power
Input sensitivity:(x 20) 3.74 Volts ±3% for 4 Ohm rated power, 4 Volts ±3% for 1 kHz 2 Ohm rated power
Input impedance15 k Ohms, balanced
Current Draw @ 1/8 power1,875 Watts @ 2 Ohms; 1,250 Watts @ 4 Ohms
Current Draw @ 1/3 power4,350 Watts @ 2 Ohms, 3,050 Watts @ 4 Ohms
Thermal emissions @ 1/3 power14,843 @ 4 Ohms bridged
ClassH
Country of ranufactureUnited States
Cooling:Two temperature dependant variable speed 80 mm high output DC fans
Controls:Two front panel attenuators, rear panel mode switch and gain select switch
Indicator LEDs:2 ACL (clip limiting), 2 signal presence, 2 active status, 2 DC protect, 2 temperature limit
Protection:Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors:XLR, Speakon and Binding Post speaker output, 120 Volt 30 amp twist lock connector, 240/230 Volt 20 amp IEC mains
Construction:16 ga. steel with 5 mm aluminum front panel
Dimensions:89 mm x 483 mm x 311 mm + 38 mm for rear support ears and connectors (3.5” x 19” x 12.25” + 1.5”)
Net weight:10.9 kg. (24 lbs.),
Gross weight:13.2 kg. (29.1 lbs.)

More +

Shipping Rate Calculator

 

Also Popular