Crest PRO 9200 Two-Channel Power Amplifier - 1300W Per Ch @ 8 Ohms

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:CRES-PRO9200

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing exceptionally high power ratings (6500 W bridged on the Pro 9200) in a compact, lightweight (under 25 lbs.) 2U package. The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect connected drivers; IGM Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled, high efficiency heat sinksl and veriable-speed DC fans to limit the operating temperature and extend amplifier life.

    Features:

    • 8 Ohm Stereo - 1300 W
    • 4 Ohm Stereo - 2200 W
    • 2 Ohm Stereo - 3250 W
    • 4 Ohm Bridged - 6500 W
    • Dramatically reduced net weight
    • Latest generation of high speed, wide-bandwidth output devices
    • Twin-tunnel cooling with back-to-front air flow
    • Dual, rear-mounted, continuous variable-speed fans
    • Balanced male and femal XLR inputs with switch-configurable XLR polarity and sensitivity selection
    • Speakon(r) and five-way binding post output connectors
    • Front panel circuit breaker switch
    • Modular construction
  • Rated power bridge mode 4 Ohms6,500 Watts @ 1 kHz at <0.1% T.H.D.
    Rated power bridge mode 8 Ohms4,400 Watts @ 1 kHz at <0.1% T.H.D.
    Rated power (2 x 2 Ohms)3,250 Watts per channel @ 1 kHz <0.1% T.H.D. both channels driven
    Rated power (2 x 4 Ohms)2,200 Watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven
    Rated power (2 x 8 Ohms)1,300 Watts per channel @ 1 kHz at <0.025% T.H.D. both channels driven
    Rated power (1 x 2 Ohms)4,200 Watts @ 1 kHz at <0.1% T.H.D
    Rated power (1 x 4 Ohms)2,550 Watts @ 1 kHz at <0.05% T.H.D
    Rated Power (1 x 8 Ohms)1,450 Watts @ 1 kHz at <0.025% T.H.D
    Minimum load impedance2 Ohms
    Maximum RMS voltage swing113 Volts
    Frequency response:10 Hz - 100 kHz;+0,-3 dB at 1 Watt
    Power bandwidth:10 Hz - 30 kHz; +0, -3 dB at rated 1000 Watts 8 Ohm power
    T.H.D. (2 x 2 Ohms):<0.1% @ 2,350 Watts per channel from 20 Hz to 20 kHz
    T.H.D. (2 x 4 Ohms):<0.1% @ 1,950 Watts per channel from 20 Hz to 20 kHz
    T.H.D. (2 x 8 Ohms):<0.1% @ 1,200 Watts per channel from 20 Hz to 20 kHz
    Input CMRR:>-85 dB @ 1 kHz
    Voltage gain:x 40 (32 dB) or x 20 (26 dB)
    Crosstalk:>-70 dB @ 1 kHz at rated power @ 8 Ohms
    Hum and noise>-113 dB,“A” weighted referenced to rated power @ 8 Ohms
    Slew rate>10V/us
    Damping factor (8 Ohms)>300:1 @ 20 Hz - 1 kHz
    Phase response+5 to -15° from 20 Hz to 20 kHz
    Input sensitivity:(x 40) 2.35 Volts ±3% for 4 Ohm rated power, 2 Volts ±3% for 1 kHz 2 Ohm rated power
    Input sensitivity:(x 20) 4.7 Volts ±3% for 4 Ohm rated power, 4 Volts ±3% for 1 kHz 2 Ohm rated power
    Input impedance15 k Ohms, balanced
    Current Draw @ 1/8 power:3,350 Watts @ 2 Ohms; 2,200 Watts @ 4 Ohms
    Current Draw @ 1/3 power;7,300 Watts @ 2 Ohms, 5,000 Watts @ 4 Ohms
    Thermal emissions @ 1/3 power24,909 @ 4 Ohms bridged
    ClassH
    Country of ranufactureUnited States
    Cooling:Two temperature dependant variable speed 80 mm high output DC fans
    Controls:Two front panel attenuators, rear panel mode switch and gain select switch
    Indicator LEDs:2 ACL (clip limiting), 2 signal presence, 2 active status, 2 DC protect, 2 temperature limit
    Protection:Thermal, DC, turn-on bursts, subsonic, incorrect loads
    Connectors:XLR, Speakon and Binding Post speaker output, 120 Volt 30 amp twist lock connector, 240/230 Volt 20 amp IEC mains
    Construction:16 ga. steel with 5 mm aluminum front panel
    Dimensions:89 mm x 483 mm x 311 mm + 38 mm for rear support ears and connectors (3.5” x 19” x 12.25” + 1.5”)
    Net weight:10.9 kg. (24 lbs.),
    Gross weight:13.2 kg. (29.1 lbs.)
  • Shipping rates calculator