Have a Question? Contact Us

888-462-7828 Live Chat

Crown XTI1002 275W 2-Channel Power Amplifier - B-stock

  • Dale #:

    CROW-XTI1002BSTK
  • Availability:

    In Stock
  • Available for immediate shipment and pick-up from our Jamaica, New York location. In-store pick-up is available Monday through Friday from 8:30 am to 5:30 pm

Condition: B-Stock
This item was used in our demo room. There are visible scratches on front and top panels.
Power cable is included. Does not ship in the original box.

Description

There's no debate – when you choose Crown's XTi 1002, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night witho... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Description

There's no debate – when you choose Crown's XTi 1002, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility.

XTi 1002:

  • 2ohm Stereo (per ch.): 700W
  • 4ohm Stereo (per ch.): 500W
  • 8ohm Stereo (per ch.): 275W
  • 8ohm Bridge-Mono: 1000W
  • 4ohm Bridge-Mono: 1400W

Features:

  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager™ and System Architect™ control software
  • Increased number of presets to a total of 50; 49 of which are user definable

More +

Product Specs

INTEGRATED PROCESSING
Input EQ6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.
Crossover FiltersHighpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.
Output EQ8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.
DelayFor signal alignment of driver; 50 mS of total delay.
SubHarmonic SynthTakes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.
Peakx™ Plus LimiterUser defeatable limiter that allows users to control Threshold, Attack, and Release times.
Presets50 total presets, 49 of which are user-definable.
PERFORMANCE
Sensitivity (for full rated power at 4 ohms)1.4 Vrms
Frequency Response (at 1 watt, 20 Hz - 20 kHz)+0 dB, –1 dB
Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms)100 dB (A weighted)
Total Harmonic Distortion (THD)< 0.5%
Damping Factor 20 Hz to 1 kHz> 500
Crosstalk (below rated power)20 kHz - 1 kHz: > 70 db
Input Impedance (nominal)20k ohms balanced, 10k ohms unbalanced
Maximum Input Signal+22 dBu typical
AC Line Voltage and Frequency Configurations100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) 6.8A; no more than 38W at idle
CONTROLS
LevelTwo front-panel rotary level controls, one for each channel
Power SwitchOn/Off switch applies AC power to the amplifier
Sel/Prev/Next ButtonsThree buttons near the LCD screen that are used to access menu items and front panel lockout
LCD ScreenBacklit liquid crystal display that shows preset and processing status
INDICATORS
Signal IndicatorGreen LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
–10 IndicatorGreen LED flashes when output signal exceeds -10 dB below clip.
–20 IndicatorGreen LED flashes when output signal level exceeds -20 dB below clip.
Ready Indicator
 
Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip IndicatorRed LED, one per channel, turns on at the threshold of audible distortion
Temp IndicatorRed LED, one per channel, illuminates under excessive temperature conditions
Power IndicatorBlue LED illuminates when the amplifier has been turned on and has power
INPUT/OUTPUT CONNECTORS
Input ConnectorsXLR, one per channel
Link/Out ConnectorLoop-thru signal from input connector for linking another amplifier, one per channel.
Output ConnectorsTwo Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors).
HiQnet™ USB ConnectorType B, connects to HiQnet™ network.
CONSTRUCTION
ChassisSteel
Front PanelCast-aluminum
CoolingProportional speed fan with front-to-rear airflow.
Dimensions19" (W) x 3.5" (H) x 12.25" (D)
Net Weight18.5 lbs (8.4kg)
Shipping Weight21.5 lbs (9.8kg)

More +

Shipping Rate Calculator

 

Related Products