The D15 HP bi-amped active speaker is equipped with a DIGIPRO G2 amplifier delivering 1400W The D15 HP is a bi-amped active speaker features a 15” (voice coil 3”) woofer and a 1.4” (voice coil 3”) compression driver installed on a 60°x40° aluminium CD- horn. The speaker’s horizontal directivity is 60° by default factory setting. The speaker is made of 15mm birch ply wood, the 3 handles, the 6 flytracks, the 6 M10 threads and the 4 flypins located on the sides and the back of the speaker are enabling easy transport and installation. The speaker has been designed to be used also as stage monitor (45° angle). By rotating the horn you can maintain the same coverage angle also when the speaker is used as monitor. In the bottom of the box there is a standard pole mount cup (D36mm) made of aluminium.
The balanced inputs can be used to connect balanced or unbalanced microphones or audio sources at line level (0dB). The balanced connector is connected in and can be used to send the audio signal to other amplified speakers, recorders or supplementary amplifiers. Each active speaker features its own power cable. Connection is done by a Neutrik POWER CON (blue) model which permits easy and fast connection to the speaker as well as being an excellent locking system. The same connector serves as a switch to turn ON and OFF the active loudspeaker by turning the connector to the left (OFF) or right (ON). The active speaker must be connected to a power supply able to deliver the maximum required power. On the rear of the speaker, a Neutrik POWER CON connector (grey) offers linking the mains power supply. This socket links the power supply to another speaker, thereby reducing the direct connections to the mains. Maximum amplifier input power is shown on the amplifier panel. The maximum number of speakers connected together varies of max input power and of the maximum allowed current of the first power socket.