dBTechnologies DVX DM 12TH - 2 Way Active Stage Monitor with 12" Woofer

The DM12 TH active monitor is equipped with a DIGIPRO amplifier which delivering 750W (RMS) for the bass section and 375W (RMS) for the high frequency section. The active speaker DM12 TH is two-way monitor features a neodymium 12” (voice coil 4”) woofer and a neodymium 1.4” (voice coil 2,5”) compression driver installed on a 40x90 degree aluminium CD- horn. The speakers’ horizontal directivity is 40 degrees by default factory setting.

The 2-way, double amplifier stage monitors of the DVX DM TH series are equipped with a highefficiency DIGIPRO 1500S digital amplifier of the DIGIPRO G2 series, which can output 1500W RMS. The power supply circuits of the DIGIPRO G2 amplifier has been conceived to work in fullrange mode; thanks to the SMPS (Switched-Mode Power Supplies) technology with PFC (Power Factor Correction) the operation with supply voltages between 100 Vac and 240Vac is guaranteed by ensuring the same sound performances even with floating and non-stabilized power supply systems. This high-efficiency amplifier allows to get high output powers, while keeping weight and dimensions small. The high SPL and the accurate frequency response allow this series of stage monitors to be used on large stages, where very high performance is required. The selector located on the input panel allows to choose between 2 preset equalisations: EQ FLAT and TH EQ. The monitors DM12 TH and DM15 TH are equipped with an innovative PHASE PLUG, located in front of the woofer, to increase their sound pressure at medium frequencies (voice band). A unique feature of the DM TH series monitors is the possibility to rotate the front panel; this allows, in just a few simple steps, to configure the monitor with the horn on the right or on the left. The double logo on the panel allows to ensure that the horn position can always be seen from outside the front protection net. The horn can be rotated in its turn. The separation of the input-output connections makes wiring even more intuitive. As the inputs (PowerCon and XLR input) are located on one side and the links on the other (PowerCon e XLR output), multiple monitors can be used next to each other without any cable being visible. The boxes of the DM TH monitors are made of multi-layer birch wood, 15mm thick, and painted with black polyurea. This provides excellent durability and resistance during transport and installation. The two recessed side handles facilitate transport.