Denon DN-508MX Programmable 8-Zone Mixer

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:DENO-DN508MX

Availability: In Stock

Available for immediate shipment and pick-up from our Jamaica, New York location. In-store pick-up is available Monday through Friday from 8:30 am to 5:30 pm
Free Shipping (Continental US)
  • Recognizing a crucial, unfulfilled need in the professional market for products that can command and manage a wide variety of audio sources through a single unit, the DN-508MX Zone Mixers are refreshingly uncomplicated, high-performance solutions for controlling and routing up to eight audio sources in multi-room venues. Special attention has been paid to the design of the front panel interface to make them intuitive and easy to operate, which makes the “learning curve” on these products very short.

    Typical applications include restaurants, hotels, museums, nightclubs, sports bars and large corporate offices. These mixers have remote controllability via RS-232C and IP for the commercial installations. The DN-508MX also has several features dedicated for professional use such as a professional grade head-amp, MIC/LINE PAD, full BTL balanced outputs, 3-band EQ for inputs, 5-band EQ for outputs, Priority, Delay, Dynamics, system control application (Web remote), and scheduling function to operate automatically for optimum energy efficiency. A Web-based GUI makes it simple to control every function of the unit, from whatever device is most convenient for the user.

    Features:

    • 6 mic/line inputs
    • 4 ST inputs
    • 1 aux input on front and rear
    • 8 zone outputs
    • Professional-grade grounding and sound quality
    • Remote controllability using TCP/IP, RS-232, and RS-422
    • 3-band equalizer for all inputs
    • 5-band equalizer for all zone outputs
    • Delay and dynamics function for all zone outputs
  • Frequency Response 20 Hz – 20 kHz (+0.5 dB)
    Dynamic Range > 109 dB (A-weighted)
    Signal-to-Noise Ratio > 89 dB (A-weighted)
    Headroom > 20 dB
    Mic Input EIN < -127 dBu (Rs = 150 Ω, DIN)
    Mic Input CMRR > 80 dB
    Maximum Gain 88 dB (Mic Input to Master Output)
    Channel Separation < -100 dB
    THD+N Mic/Line Inputs: < 0.05%
    ST Inputs: < 0.01%
    Mic Inputs Maximum: -40 to -20 dBu (+4 dBu)
    Unity: -60 to -40 dBu (-16 dBu)
    Line Inputs Maximum: -20 to 0 dBu (+24 dBu)
    Unity: -40 to -20 dBu (+4 dBu)
    ST Inputs Maximum: +18 dBV
    Unity: 0 dBV
    Aux Inputs Maximum: +18 dBV
    Unity: 0 dBV
    Zone Outputs Maximum: +24 dBu
    Unity: +4 dBu
    Equalization (3-Band, Inputs) SHH 100 Hz – 20 kHz (+18 dB)
    PEQ 100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
    SHL 20 Hz – 20 kHz (+18 dB)
    Equalization (5-Band, Outputs) High PEQ 100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
    Mid-High PEQ 100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
    Mid PEQ 100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
    Mid-Low PEQ 100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
    Low PEQ 20 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
    Delay Attenuation 0–1000 ms
    Automatic Gain Control (AGC) Compensation 1–5
    Response Time 100–500 ms
    Noise Gate < -80 dBFS
    Priority Attenuation (1st & 2nd priorities) Threshold -74 to -20 dBFS
    Attenuation -∞ to 0 dB
    Attack Time 0–300 ms
    Hold Time 1–1960 ms
    Release Time 3–4270 ms
    Dynamics (Compressor/Limiter) Threshold -92 to -20 dBFS
    Ratio 1.0:1 – 20.0:1, ∞:1
    Attack Time 0–120 ms
    Release Time 3–4270 ms
    Gain 0 to +20 dB
    Knee Hard, 1–5
    Auto Fade Out/In for Source Selector Attenuation -30 dB
    Attack Time 100 ms
    Hold Time & Mixing 100 ms
    Release Time 100 ms
    RS-232C Connectors: 9-pin D-Sub female connector (Remote input), 9- pin D-Sub male connector (Remote Extend output)
    Speed: 9600/38400 bps
    Power: +5 V via D-Sub connection
    RS-422 Connector: RJ-45
    Speed: 38400 bps
    Terminal: 110 Ω on/off
    Power: +5 V via RJ-45 connection
    Ethernet Connector: LAN port
    Standards: Ethernet 10/100 Base
    Level Indicators Mic/Line: 1 LED (green-amber-red) per mic/line input
    Source: 1 LED (green-amber-red) per ST input
    Output: 1 LED (green-amber-red) per zone
    Peak Indication: -1 dB to 0 dB
    Connections (6) 3-pin Euroblock inputs (1 hot, 1 cold, 1 ground)
    (1) stereo RCA auxiliary input
    (1) stereo 1/8” (3.5 mm) auxiliary input
    (4) stereo RCA ST inputs
    (4) 5-pin Euroblock outputs (2 hot, 2 cold, 1 ground)
    (1) LAN port
    (1) RJ11/RJ14 port, RS-422
    (1) 9-pin D-Sub female connector, RS-232C
    (1) 9-pin D-Sub male connector, RS-232C
    (1) IEC power input
    Operation Conditions Temperature: 41–95ËšF / 5–35ËšC
    Humidity: 25–85%, non-condensing
    Power Connection: IEC
    Requirement: 100–240V AC, 50/60 Hz
    Consumption: 30 W
    Dimensions (width x depth x height, with rack ears) 19.0” x 13.5” x 1.8”
    482 mm x 344 mm x 46.3 mm
    Weight 8.55 lbs.
    3.88 kg
    Package Contents DN-508MX
    Power Adapter
    Euroblock Connectors
    Quick Start Guide
    Safety and Warranty Manual
  • Shipping rates calculator