MADI analysis and monitoring kit, Peli case (DOAPA0041) including 1x ANNA-LISA (DOATM0915), 1x MADI.MONI (DOATM1070) with 1x SFP Transceiver LC optical Multi Mode (DOICT0129) and LC optical Single Mode (DOICT0130) and 1x LC/SC patch cable optical Multi Mode (DOCAA0396) and Single Mode (DOCAA0408).
ANNA-LISA is a compact, handheld MADI analysis tool and signal generator for MADI.
Battery powered, it is an essential tool for engineers in broadcast facilities, OB vehicles, touring PA systems working with MADI. results are displayed via LEDs on the front of the device allowing engineers to rapidly confirm the integrity of MADI signals of all types, and to identify any problems occurring as a result of MADI transmission.
Remote software delivers access to extended analysis and configuration of test signals, broadening the application to systems engineering and product development labs.
A single button is used to step through a sequence of parameter checks. The results are displayed using a "traffic light" system: a red (fail), yellow (OK, but marginal) or green (good) LED illuminates to provide a clear and immediate indication of the selected signal parameter.
- AES10 conformity
- Sample rate
- MADI format (channel, frame)
- Signal amplitude
- Signal level and Jitter combined
For even more detailed analysis and configuration options, the device may be connected via Bluetooth® to a mobile device running ANNA-LISA Remote.
ANNA-LISA Remote (ANDROID™) offers access to more features:
- Level metering
- AES3 channel status read out
- Channel based routing
- Channel based gain control
- Extended control of signal generator
Standard MADI streams can be configured on the device itself. Four presets store detailed settings for signal sources (white/pink noise, sine wave, musical test tone, input signal), gains and MADI settings.
Multiple connection options
ANNA-LISA provides a coaxial BNC and an SFP MADI port. The latter can be equipped with a variety of SFP modules depending on the application. The MADI outputs are independently configurable and can pass through either input. A USB port allows for battery charging and firmware updates. A Bluetooth® module enables connection to mobile devices running the remote software (ANDROID™).
MADI.MONI is a compact, handheld MADI tester with comprehensive monitoring capabilities.
Designed for engineers in the field, the device offers a straightforward, uncluttered interface to confirm the integrity of the physical link, the format and settings of the MADI transmission as well as the audio signal itself.
Battery powered and equipped with a 3.5mm headphone jack, MADI.MONI is an essential tool for engineers and technicians working on MADI-based systems such as OB vans, touring PA setups, concert halls and many more.
Four push buttons are all that is required to operate MADI.MONI:
- VOL/CH toggles between volume level and channel selection
- MENU opens the device settings
- The two SET buttons increase/decrease channel selection or volume control or alter a device setting
- The VOL/CH/MENU LEDs indicate the parameter selection. The alphanumeric display monitors the value of the selected parameter
Finally, there are 12 LEDs pertaining to format (sample rate, frame mode, channel format) and signal quality (amplitude, jitter) that use a "traffic light" system (red/yellow/green) to offer a constant, at-a-glance overview of the state of the MADI signal. Even the optical level can be measured with supported SFP modules.
The brightness of the user interface is adjustable to ensure a readable display on outside jobs on sunny days as well as in dimly lit theater backstages.
A mono or stereo channel (pair) can be selected from the active MADI input to monitor the audio signal via the built-in headphone jack. MADI.MONI supports all sample rates from 32 up to 192 kHz with S/MUX and 96k frame format.
MULTIPLE CONNECTION OPTIONS
MADI.MONI provides a coaxial BNC and a SFP MADI port. The latter can be equipped with a variety of SFP modules depending on the application. The MADI outputs are independently configurable and can pass through either input. A USB port allows for battery charging and firmware updates.