Made in the Focal Workshops in St. Etienne France, Clear is a reference high-fidelity headphone, taking inspiration from Focal's best technologies found in Utopia and innovations that defined Elear. Clear's full-range speakers and open back design reveal the tiniest musical details. This is important because it is the widely held impression that headphones reduce the listening space, thus impeding the realism of the sound reproduction. Clear was designed to bet the pinnacle of openness, when you're wearing Clear you will forget you are even wearing headphones. Closing your eyes, it is as if you are seated in the middle of a custom listening room with the best high-fidelity speakers available placed in front of you. This is because of the inverted aluminum/magnesium alloy M-profile dome which preserves breath and dynamics worthy of our finest high-fidelity speakers. While the micro-perforated ear cushions, specially designed yoke, and luxury headband make Clear both light and comfortable. What you will hear is unparalleled uniformity, and what you will feel is a transcendent understand of music. Welcome to absolute sound.
- Remarkable tonal balance over the entire spectrum
- Bass articulation, down to the very lowest frequencies
- Great detail in the high frequencies
- A listening experience very close to a pair of monitor speakers • Comfort and ergonomics
- Design and materials used
- Excellent performance connected to a laptop computer
- 2 cables provided, for each type of use
- Rigid carrying case provided
PRECISION IS IN THE DETAIL
Clear Professional uses a new generation of Focal 40mm fullrange speaker. A 24.5mm diameter, 5.5mm long unsup ported copper coil has been developed. This major innovation weighs just 100mg. The material chosen, copper, has the effect of achieving an extremely high magnetic field in the coil. With this, the moving parts are always under control, even at maximum capacity, providing bass articulation worthy of the best subwoofers. Its 55 Ohm impedance makes Clear Professional easy to drive, even in mobile configuration, directly connected to the headphone output of a laptop.
The proprietary 75 micron suspension combines very low mass with high elongation. It contributes to exceptional impulse response with breakup raised to 24kHz. Thus, high frequencies are extremely linear and transients totally respected. Clear Professional is capable of precisely revealing the tiniest details of the recording, providing extremely precise control.
35 YEARS’ KNOWHOW IN THE SERVICE OF THE ACOUSTIC ABSOLUTE
One of the reasons why work on headphones is significantly different from that on a pair of monitor speakers is the waveform generated by the loudspeaker and the listening distance. Whether an inverted dome or a positive dome is used, a listening distance measured in centimetres requires a total rethink of the form of the dome to obtain a plane wave in an extremely close field. The French manufacturer’s 35 years of experience have resulted in a new generation of domes, launched on Elear and Utopia headphones: the Mprofile dome. Formed of an Aluminum/Magnesium alloy, it offers an ideal ratio, combining low mass, high rigidity and excellent damping. It is when you listen that you understand the full meaning of 'M' geometry: breadth and dynamics worthy of the best monitors are truly on offer. Focal made the most of this decisive advantage when it designed some of the most open headphones ever, thanks to very particular work on the ear cushions.
MAKING THE HEADPHONES DISAPPEAR, TO THE BENEFIT OF THE SOUND
One overwhelming factor governing one’s ability to work with headphones is their acoustic impedance. What this means is that, in addition to their weight, users identify wearing headphones, even open models, as a change of space resulting in the sensation of leaving the room and going into a lower volume room. The design of Clear Professional solves this problem, thanks to their new microfibre ear cushions. The ear pads are to the headphones what the room is to acoustic speakers. Their onemillimetre diameter microperforations on the outside edge give a level of openness that is unequalled at this price range. The sensation of listening in the room, and not through headphones, is intensified. The second benefit to this design is its extreme tolerance to ear cushion positioning, regardless of head profile and size. This degree of openness also provides the benefit of excellent readability of upper bass and low midrange registers, typically where headphones usually nd their limits in comparison with monitors.
At the same time, the ear cushions are also designed to define a 'listening room' acoustic. Here, special care was taken to the ratio between absorption and diffusion, in order to o er a control room with ideal acoustics. This resulted in a very specific design of the inside of the ear cushion. A very open acoustic fabric over 50% of the height of the cushion generates absorption, while the perforated micro bre on the remaining 50% controls acoustic diffusion. On the design side, the finish of the ear cushions is reprised under the headband, giving black leather to the top and burgundy perforated microfibre below, in a gentle hommage by the French manufacturer to its SM6 range of monitor speakers.
A UNIQUE DESIGN COMBINING COMFORT AND NOBLE MATERIALS
Focal has developed a constant curvature headband design, regardless of listener head size. The weight of the headphones is evenly distributed over the head, support being concentrated into one or two points. The solid Aluminum yoke is coated with structured black paint offering not only sleek design by also resistance to impacts and scratches. The yoke is also free from the traditional vertical rotation mechanism, which has been transferred to the headband for even greater comfort. The asymmetry of the yoke’s attachment points to the ear pads provides optimal clamping force distribution, thus ensuring excellent fit, especially under the ears, to avoid any sound leakage translating as significant losses in the bass. The high resilience memory foam used in the ear cushions ensures a perfect fit to the face. This guarantees tonal stability and extra comfort for all.
CLEAR PROFESSIONAL, ALWAYS BY YOUR SIDE
Clear Professional comes with two cables so that users have the best solution for their device of choice. These OFC copper 24AWG cables offer very low resistance, and therefore high acoustic transparency. The first cable, a 5m spiral, for use in the studio, connected to a mixing console, for example. The second, 1.2m in length, is tted with a 3.5mm stereo jack connector. This will be the cable of choice for people on the move, ensuring very highquality reproduction connected to a compact audio interface using the 3.5mm to 6.35mm jack adapter. It can also be directly connected to a computer headphone output, where its low 55 Ohm impedance gives it a decisive advantage.
The headset itself is equipped with two locking 3.5mm mono jack sockets to secure the connection cable. The final Clear Professional accessory is a rigid carrying case. Its thermoformed shell in the shape of the headphones protects them from impacts and the hazards associated with transport. It also has capacity to store one cable and an iLok® key (not provided), all within its compact dimensions.
FOCAL: TOTAL CONTROL OF THE MANUFACTURING CYCLE IN THE SERVICE OF ACOUSTIC PERFORMANCE
The innovation implemented in the speakers in Elear and Utopia headphones is further strengthened with the arrival of Clear Professional. The very low mass of the moving parts of these three products has led to the design of a dedicated production line on Focal’s site in SaintÉtienne (France), ensuring exceptional levels of precision to be achieved. When the five manufacturing stages of the speaker are complete, every transducer is tested and measured, after which they are paired. In this way, every pair of headphones has guaranteed speakers with a frequency response curve of +/ 0.5dB!