Focusrite Pro RedNet 4 - 8-Channel Mic/Line to Dante Audio Network Interface

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:FOPR-REDNET4

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

    Features:

    • Eight high-quality Focusrite mic preamps 
    • Selectable line and DI inputs for input flexibility 
    • Dynamic range: 119dB 
    • THD+Noise: <0.001% 
    • Mic input Level up to +16dBu 
    • Max mic input gain: 63dB 
    • JetPLL™ jitter-reduction technology

    What is RedNet
    RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network audio interfaces for the recording studio – or any application that requires moving high quality audio around with ultra-low latency.

  • Microphone Inputs

    Gain range

    0 dB; 8 to 63 dB in 1 dB steps

    Type

    Electronically balanced, Zin = 2.4 kohms

    Max. input level

    +16 ±0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, pad out

    Min. input level

    -47 ±0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, pad out

    Frequency response

    20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz); Rs = 150 ohms

    THD+N

    < 0.0007% @ -1 dBFS; +15 dBu input, Rs = 150 ohms, 20 Hz – 22 kHz

    Noise

    EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz – 22 kHz

    Phantom power

    48 V, independently switchable per-channel

    Signal-to-noise ratio

    119 dB ‘A’-weighted; Rs = 150 ohms

    Line Inputs

    Gain range

    -12 to 42 dB in 1 dB steps

    Max. input level

    +24 ±0.5 dB; min. gain for 0 dBFS

    Min. input level

    -30 ±0.5 dB; max. gain for 0 dBFS

    Frequency response

    20 Hz – 20 kHz ±0.1 dB

    THD+N

    ﹤ 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz – 22 kHz

    Signal-to-noise ratio

    117 dB ‘A’-weighted

    Instrument Inputs (Inputs 1 & 2 only)

    Gain range

    +14 to 68 dB in 1 dB steps

    Max. input level

    +10 ±0.5 dB; min. gain for 0 dBFS

    Min. input level

    -44 ±0.5 dB; max. gain for 0 dBFS, pad out

    Frequency response

    20 Hz – 20 kHz ±0.1 dB

    THD+N

    ﹤ 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz – 22 kHz

    Signal-to-noise ratio

    112 dB ‘A’-weighted

    Analogue High-Pass Filters

    Selection

    Independently switchable per-channel

    Frequency/slope

    -6 dB @ 65 ±3 Hz, 12 dB/octave

    Crosstalk

    Input to input

    ﹤-80 dB (all other channels at 0 dBFS)

    Digital Performance

    Supported sample rates

    44.1 / 48 / 88.2 / 96 / 192 kHz

    Clock sources

    Internal or from network master device

    Power

    PSU

    Internal, Universal type, consumption 30 VA

    Front Panel Indicators

    Power

    Green

    Network connected

    Green

    Sync lock

    Green

    Sample rate

    Yellow x 5

    Channel 1/2 source

    Yellow x 3 (mic/line/inst)

    Signal level

    Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)

    Channel select buttons

    8

    Channel function controls

    Input source, HPF, phantom power, Gain encoder

    Channel display

    Colour OLED; channel number, input source, gain

  • Shipping rates calculator