Galaxy Audio DHXR4N Four Channel Wireless Receiver (N Band/518-535 MHz)

Dale #:
GALA-DHXR4N
Availability:
Not in Stock - Reserve Yours
This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Retail Price: $1,304.99 Our Price: $869.99

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828

The DHXR4 offers 4 independent receivers, each with Auto Scan, IR Sync, and 120 selectable channels. The receivers have also been improved with Tone-key squelch for improved rejection of outside interference. The DHXR4 has a built in antenna combiner and power distributor. The DHXR4 has 4 independent XLR outputs (one for each channel) as well as mixed output, allowing the user to submix the microphones on the DHXR4 and come out of one XLR or 1/4" output. The DHXR4 can be used with any 65 or 77 Series Handheld or Body Pack transmitter, in addition to the wireless shock mount base, the SM-W77.

Features:

300' Range
120 Selectable Channels
UHF Frequency
Auto Scan
Detachable BNC Antennas
Rack Mount Kit Included

More +

DHXR4 SYSTEM SPECS
Available Frequencies	120
Frequency Ranges	CODE D 584~607MHz CODE L 655~679MHz CODE N 518~535MHz
Transmitter Output Level	20 mW
Band	UHF
Operating Range	Under Typical Conditions 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response	(+/-3dB) 60Hz - 16Hz
Total Harmonic Distortion	(+/-30kHz deviation, 1kHz tone): <1%
Dynamic Range	>90dB A-weighted
Operating Temperature Range	14° F to 122° (-10° C to 50° C), battery characteristics may limit this range
DHXR4 RECEIVER
Audio Output Level (+/-30 kHz deviation 1 kHz tone)	XLR Connector (into 600 Ohms load) 6dBV 1/4" Connector (into Ohms 3k load) 0dBV
Output Connections	Four Male XLR Balanced 1 Mixed XLR Balanced 1 Mix 1/4" Unbalanced
Output Impedance	XLR connector 200 ohms 1/4" connector 1k Ohms
XLR Output	Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio + Pin 3: No Audio -
Sensitivity	-93dBm for 30dB
Image Rejection	>90dB
Casing	Metal Chassis EIA STANDARD 1/2 U
Dimensions	1.7" x 16.1" x 11" (45 x 410 x 280 mm)(HxWxD)
Weight	117 oz (3,300 g)
Power Requirements	12-18 V DC at 1000 mA, supplied by external power supply

More +

Shipping Rate Calculator

Country

Zip/Postal Code