|Frequency Range (-10 dB)
||55 Hz – 20 kHz
|Frequency Response (±3 dB)
||80 Hz – 20 kHz
||90° x 90°
|Directivity Factor (Q)
||10.1 (1 k – 16 kHz)
|Directivity Index (DI)
||9.5 dB (1k – 16 kHz)
|Long-Term System Power Rating (IEC)
||400 W (1600 W peak), 2 hrs.
250 W (1000 W peak), 100 hrs
|Sensitivity (2.83V @ 1m)
||96 dB (Ave. 80 Hz – 20 kHz)
||Direct 8Ω: 122 dB (peaks of 128 dB)
200 W Tap: 119 dB
||1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order
low-pass to LF
||70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
|Low Frequency Driver
||Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.
|High Frequency Driver
||25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
|HF Driver Protection
||Minimum audibility SonicGuard™ HF overload protection
||ABS with Glass enclosure, heavily braced
||Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
||Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing.
||CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
||IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
||402 x 402 x 445mm (15.8 x 15.8 x 17.5 in), cabinet
470 mm (18.5 in) depth with gland nut
542 mm (21.4 in) including bracket extending to back
||Available in gray (similar to Pantone 420C) and black (-BK)
||15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracket
||23.4 kg (51.5 lbs)
||U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.