|Frequency Range (-10 dB)
||70 Hz – 18 kHz
|Frequency Response (±3 dB)
||100 Hz – 16 kHz
||110º x 110º
||7.2 (1 k – 16 kHz)
|Directivity Index (DI)
||7.9 dB (1 k – 16 kHz)
|Long-Term System Power Rating (IEC)
||175 W 2 hrs.
120 W 100 hrs
|Sensitivity (2.83V @ 1m)
||92 dB (Ave. 100 Hz – 18 kHz)
||Direct 8Ω: 114 dB (peaks of 120 dB)
120 W Tap: 112 dB
||1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF
||70V: 120W, 60W, 30W, 15W
100V: 120W, 60W, 30W
|Low Frequency Driver
||Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil.
|High Frequency Driver
||25 mm (1 in) diaphragm and voice coil diameter
|HF Driver Protection
||Minimum audibility SonicGuard™ HF overload protection
||ABS with Glass enclosure
||Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
||Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
||CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16”) and 9.0 mm (0.36”).
||IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
||259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet
288 mm (11.4 in) including gland nut
309 mm (12.2 in) including bracket extending to back
||Available in gray (similar to Pantone 420C) and black (-BK)
||6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket
||8.8 kg (19.5 lb)
||U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel.