|Frequency Range (-10 dB)
||80 Hz – 20 kHz
|Frequency Response (±3 dB)
||100 Hz – 20 kHz
||120° x 120°
|Directivity Factor (Q)
||8.1 (1 k – 16 kHz)
|Directivity Index (DI)
||8.4 dB (1 k – 16 kHz)
|Long-Term System Power Rating (IEC)
||250 W 2 hrs.
200 W 100 hrs
|Sensitivity (2.83V @ 1m)
||94 dB (Ave. 100 Hz – 20 kHz)
||Direct 8Ω: 118 dB (peaks of 124 dB)
200 W Tap: 117 dB
||1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order
low-pass to LF
||70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
|Low Frequency Driver
||Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
|High Frequency Driver
||25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
|HF Driver Protection
||Minimum audibility SonicGuard™ HF overload protection
||ABS with Glass enclosure, heavily braced
||Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
||Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
||CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
||IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
||300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland nut
359 mm (14.2 in) including bracket extending to back
||Available in gray (similar to Pantone 420C) and black (-BK)
||9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
||14.1 kg (31.0 lb)
||U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.