Have a Question? Contact Us

888-462-7828 Live Chat

Lectrosonics M2T Duet Series IEM/IFB Transmitter (with Dante Connectivity)

 
  • Dale #:

    LECT-M2T
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Description

The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors arefull size XLR/TRS combo types... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors arefull size XLR/TRS combo types for balanced line level analog signals while the input preamp circuits use aspecial balanced amplifier with very high common mode rejection to minimize hum and noise. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware. 

Features:

  • IEM (Wireless Monitor) with digital RF transmission
  • 24-bit digital audio
  • 2 independent stereo audio transmissions per 1/2 RV enclosure
  • USB port for firmware updates
  • IR (infrared) port for fast setup
  • Up to 50 mW per Rf carrier
  • All metal housing
  • Compatible with Wireless Designer™ Software

More +

Product Specs

RF Power Output 2 RF carriers, 25 mW, 50 mW; adjustable.
Antenna Output 2 x BNC sockets
Operating Frequencies 470.1 – 607.975 MHz
Frequency Selection Steps 25 kHz
Frequency Stability ± 0.002%
Modulation 8 PSK
Emission Designator 200KG7E
Spurious Radiation >90 dB below carrier
Equivalent input Noise –128 dBV
Audio Frequency Response 20 HZ - 15 KHZ, -3 dB
Audio Input -10 dBv or +4 dBu settings w/ ±5 dB trim
Audio Input Jack 4 x combo XLR/TRS connectors
Dante Connection (M2T-D Only) 2 x RJ45. Internally routable with Ultimo 4x4 module
Ethernet Connection RJ45
USB Connection Micro USB on front panel for firmware updates
IRDA IR transceiver for sync of receivers
Input impedance Line: 2k Ohm
Headphone jack ¼ inch stereo jack
Power Requirements 9-18V DC
Power Consumption 5 Watts
Dimensions Height: 1.750 in. / 44.45 mm
Width: 8.375 in. / 212.7 mm
Depth: 7.750 in. / 196.8 m

More +

Shipping Rate Calculator

 

Also Popular