Have a Question? Contact Us

888-462-7828 Live Chat

Lectrosonics SPN 812 Digital Matrix Audio Processor

 
  • Dale #:

    LECT-SPN812
  • Availability:

    Reserve Yours Now
  • This item usually ships within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

From small installations all the way up to sophisticated, multi-layered systems, these ASPEN mixers are the perfect compliment to your audio integration. Unlimited input expansion and 48 mix buses give you phenomenal scalibility. The Proportional Gain Algorithm provides seamless auto-mixing and i... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

From small installations all the way up to sophisticated, multi-layered systems, these ASPEN mixers are the perfect compliment to your audio integration. Unlimited input expansion and 48 mix buses give you phenomenal scalibility. The Proportional Gain Algorithm provides seamless auto-mixing and integrates easily with with echo cancellation, analog mixing consoles, or any other type of audio system. And with TCP/IP addressibility for control through Ethernet, ASPEN is now part of your network.

Any way you look at it, the ASPEN line from Lectrosonics is your new choice in professional DSP audio processing systems.

  • Ultra low noise input preamps
  • Full crosspoint matrix with 48 outputs
  • Unlimited input expansion
  • TCP/IP Ethernet addressable
  • Seamless auto-mixing with PGA™ at the matrix crosspoints
  • Simultaneous multi-point 3rd party and native control
  • Ultra-low latency
  • Automatic Master/Slave detection
  • Single CAT6 interconnection carries data, audio and control signals

More +

Product Specs

Audio inputs
Max. input level20 dBu
Gain0 dB to 56 dB, programmable in 8 dB steps(the analog gain is automatically selected by selecting the input gain)
Input impedance8 kΩ differential mode, 2 kΩ common mode
Phantom voltage48 V
Dynamic range102 dB
EIN-127 dBu (20Hz – 20kHz, unweighted)
THD + noise0.01%
Audio outputs
Nominal level0 dBu, channels 1-8
0 dBu, -20 dBu, -40 dBu, channels 9-12
Headroom20 dB
Output impedance< 50 Ω, all outputs, at all attenuator settings
Dynamic range105 dB
THD + noise0.01%
Latency
Single-board64 audio samples = 1.333 ms
System64 + 6 * (total number or boards – 1) audio samples
1.333 + 0.125 * (total number or boards – 1) ms
Monitor output (1/4” headphone jack)
Signalany of the 48 final mixes
Output power50 mW (<50 ohm impedance recommended)
Filters
Noise reduction filtersAdjustable 6 to 35 dB on every input
Tone control stages4 per input channel
Parametric EQ stages8 per output channel
ADFE8 per input channel Configurable as Static or Dynami
Filter types
Low Pass:Butterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Linkwitz-Riley (12, 24 dB/octave)
Additional parameters: frequency [Hz]
High PassButterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Linkwitz-Riley (12, 24 dB/octave)
Additional parameters: frequency [Hz]
Low ShelvingButterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Additional parameters
frequency [Hz]
boost/cut [dB]
High ShelvingButterworth (6, 12, 18, 24 dB/octave)
Bessel (6, 12, 18, 24 dB/octave)
Additional parameters
frequency [Hz]
boost/cut [dB]
Peaking EQ (parametric)Parameters
frequency [Hz]
bandwidth [octave]
boost/cut [dB]
Internal Signal Generator
Swept sineModes:single sweep, continuous sweep
Waveforms:sawtooth (up or down), triangle
Sweep rate: linear, logarithmic
Parameters:start freq, stop freq, level [dBu], sweep time [sec]
White noiseParameter: level [dBu]
Pink noiseParameter: level [dBu]
Tone (sine wave)Parameters: level [dBu], frequency
Power Requirements100-240 VAC, 50/60 Hz
Power Consumption
1RU models15 Watts
2RU models30 Watts
Dimensions
1RU models1.75 x 19.00 x 7.70 inches
2RU models3.50 x 19.00 x 7.70 inches
Weight
1RU models3.64 lbs., 1651 grams
2RU models5.73 lbs., 2600 grams

More +

Shipping Rate Calculator

 

Also Popular