Have a Question? Contact Us

888-462-7828 Live Chat

Lectrosonics SRC-B1 Dual Ch. Slot-Mnt Receiver, 3, Block Tuning, IR Sync

  • Dale #:

    LECT-SRCB1
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock, but we can usually ship it within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

The SRc5P and SRc consists of two separate receivers built into a single, ultra compact housing with adapters for video camera receiver slots and for stand-alone use. Digital Hybrid Wireless® technology provides superb, compandor-free audio quality and compatibility with other wireless systems. T... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The SRc5P and SRc consists of two separate receivers built into a single, ultra compact housing with adapters for video camera receiver slots and for stand-alone use. Digital Hybrid Wireless® technology provides superb, compandor-free audio quality and compatibility with other wireless systems. The RF performance is extremely stable over a very wide temperature range, making the receiver perfectly suited to the rough environmental conditions found in field production.

Features:

  • Fits camera "slots," Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
  • Tunes over a 75 MHz range* (3 blocks)
  • Dual receiver design for two channels with phase switched diversity or single channel with ratio diversity operation
  • Digital Hybrid Wireless® with compatibility modes for use with other transmitters
  • Tracking front-end filters for high performance in tough RF environments
  • LCD with RF spectrum scanning
  • SmartSquelchTM DSP-controlled, noise based filtering and squelch
  • DSP-based pilot tone for squelch control
  • IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
  • SmartTune operation for quick and confident frequency selection

DSP compatibility modes allow the receiver to be used with a variety of Lectrosonics systems, other brands of wireless systems and with Lectrosonics IFB transmitters.

Included Accessories:

  • 1 - Adjustment Tool (Part# 35679)
  • 2 - Antennas (Part #AMJ-XX)
  • 1 - Quickstart Guide

Ikegami
All current Ikegami camcorders with Uni-Slot receiver mounts are dual-channel capable in the slot with a simple switch activation on the UI board, including models:

  • HDS-V10
  • HDN-X10
  • DNS-33W

Contact engineering at Ikegami for details:
website: http://www.ikegami.co.jp/global/
e-mail: engineering@ikegami.com
phone: (201) 368-9171

Panasonic
SR Compatibility with Panasonic Professional Camcorders:

Cameras currently shipping with the two-channel* audio operation within the receiver slot (Unislot) with the SR/SRa Receivers. If you have an older version of these cameras,
you may need a firmware upgrade available from Panasonic.

  • AG-HPX300
  • AJ-HPX2000
  • AJ-HPX2100
  • AJ-HPX2700
  • AJ-HPX3000
  • AJ-HPX3700

*Note: SRc, Src5P, SRb, SRb5p, SR, SRa, SR5P and SRa5P Receivers all operate in diversity mode in either single or dual-channel modes.

Cameras requiring SRa5P Receiver and external audio inputs for two channel operation.

  • AG-HPX500
  • AG-HDX900
  • AJ-SPX900/800
  • AJ-SPC700
Information Provided By Panasonic Japan

More +

Product Specs

Operating FrequenciesBand A1: 470.100 - 537.575 MHz
Band B1: 537.600 - 614.375 MHz
Band B2: 563.200 - 639.975 MHz
Block 606: 606.000 - 631.500 MHz
Band C1: 614.400 - 691.175 MHz
Band C2: 640.000 - 713.900 MHz/716.775 MHz selectable
Frequency selection stepsSelectable; 100 kHz or 25 kHz
Receiver TypeDual conversion, superheterodyne
IF FrequenciesCh.1: 248.450 MHz and 350.000 kHz
Ch. 2: 243.950 MHz and 250.000 kHz
Frequency Stability±0.001 %
Front end bandwidth20 MHz @ -3 dB
Sensitivity20 dB SINAD: 1.0 uV (-107 dBm), A weighted
60 dB Quieting: 2.2 uV (-100 dBm), A weighted
Squelch quietingGreater than 100 dB typical
AM rejectionGreater than 60 dB, 4 uV to 1 Volt
Modulation acceptance85 kHz
Image and spurious rejection85 dB Third order intercept: 0 dBm
Diversity methodSmartDiversityTM phased antenna combining or Ratio Diversity using both receivers for a single audio channel
FM DetectorDigital Pulse Counting Detector operating at 250 and 350 kHz
RF spectrum analyzerCoarse and fine scanning modes for RF spectrum site survey
Antenna inputs50 Ohm; SMA female connectors
Audio output connectorsInterchangeable D connector adapters for camera slot interfaces
Dual TA3 male (mini XLR) balanced output adapter
Balanced output adapter with fixed cables
Front panel audio output (5P model)Control panel TA5M with two balanced outputs
Audio output levelAdjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower
Audio channel crosstalk-80 dB or better
Front Panel Controls and IndicatorsSealed panel with membrane switches
LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level
Audio test tone1 kHz, -50 dBu to +5 dBu output (bal); 1% THD
Transmitter battery type Selection9V alkaline, 9V lithium, AA alkaline, AA lithium, NiMH
Phase invertAudio output phase normal or inverted
Compatibility modesNA HYBR     North American Digital Hybrid Wireless®
MODE 3        Other manufacturer*
200 SER         200 Series transmitters
100 SER         100 Series transmitters
MODE E        Other manufacturer*
EU HYBR       European Digital Hybrid Wireless®
300 SER         300 Series transmitters (European)
MODE 7        Other manufacturer*
MODE 6        Other manufacturer*
IFB SER         IFB transmitters in IFB mode
*Contact the factory for details on other manufacturers
SmartNR (noise reduction)OFF, NORMAL, FULL modes (available in Digital Hybrid mode only)
Audio Performance (overall system)
     Frequency Response32 Hz to 20 kHz (+/- 1dB)
     THD0.15% (system) typical in Digital Hybrid mode
System Dynamic Range
SmartNRno limitingw/limiting
OFF103.5108.0
NORMAL107.0111.5
FULL108.5113.0
(Note: The dual envelope "soft" limiter provides exceptionally good handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for dynamic range with no limiting by 4.5 dB.
Rear Panel Controls and featuresAudio output connectors
External DC input
Powering and current consumptionMin. 7 V to max. 18 Volts DC; 2.6 W
     145 mA at 18 VDC
     290 mA at 7 VDC
Runtime with SRBATTSLED adapter7.2 V, 2200 mAH "L" style battery will typically provide over 7 hours of operation
Transmitter battery level trackingLCD display with battery icon or timer readout
Operating temperature-20°C to +50°C
Weight225 grams (7.9 ozs.) with SREXT adapter
Overall dimensions
(with SREXT adapter)
2.92" wide x 1.22" high x 4.93" deep
(74 mm x 31 mm x 125 mm)

Specifications subject to change without notice

More +

Shipping Rate Calculator

 

Also Popular