Have a Question? Contact Us

888-462-7828 Live Chat

Lectrosonics WM/VT500Water-19 Transmitter, Water Tight, 2Aa, With Mic, Block 19

 
  • Dale #:

    LECT-WMVT500WATER19
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock, but we can usually ship it within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

Digital Hybrid Wireless® Belt-Pack Transmitter. Designed for wet or dusty environments, the WM transmitter features O-ring sealed battery compartments and input jack, a compression sealed antenna port and gasket sealed control panel and back cover. Dual AA batteries provide twice the operating ti... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

Digital Hybrid Wireless® Belt-Pack Transmitter. Designed for wet or dusty environments, the WM transmitter features O-ring sealed battery compartments and input jack, a compression sealed antenna port and gasket sealed control panel and back cover. Dual AA batteries provide twice the operating time of earlier watertight transmitter designs. Larger membrane switches and control panel and a highly visible, backlit LCD enhance the user interface.

Features:

  • Selectable output power to maximize battery life or operating range (50, 100 or 250 mW)
  • Machined aluminum, corrosion resistant housing
  • Water resistant seals for use in wet environments
  • LCD interface with lockout option
  • Programmable compatibility modes for use with a wide variety
  • of different receivers
  • Servo Bias input circuitry with selectable voltage

The WM is offered with M152WP Lav Microphone or as an upgrade, with the Voice Technologies VT500 Water Lav Microphone

Included Accessories:

  • 2 - Dual Lithium AA Batteries
  • 1 - Microphone (Part #M152/WP)
  • 1 - Belt Clip (Part #WMBCSL)
  • 1 - O-ring Kit (Part #ORINGKIT/WM)
  • 1 - Quickstart Guide

More +

Product Specs

Operating frequenciesBlock 470: 470.100 - 495.600
Block 19: 486.400 - 511.900
Block 20: 512.000 - 537.500
Block 21: 537.600 - 563.100
Block 22: 563.200 - 588.700
Block 23: 588.800 - 607.900 / 614.100 - 614.300
Block 24: 614.400 - 639.900
Block 25: 640.000 - 665.500
Block 26: 665.600 - 691.100
Channel Spacing100 kHz
Frequency selectionControl panel mounted membrane switches
RF Power outputSwitchable; 50, 100 or 250 mW
Compatibility Modes (6)Digital Hybrid Wireless® (400 Series), 200 Series, 100 Series, Mode 3, Mode 6, IFB
Pilot tone25 to 32 kHz; 5 kHz deviation (in 400 Series Hybrid Mode)
Frequency stability± 0.002%
Deviation± 75 kHz max. (in 400 Series Mode)
Spurious radiation60 dB below carrier
Equivalent input noise-125 dBV, A-weighted
Input level
     Dynamic mic0.5 mV to 50 mV before limiting. Greater than 1 V with limiting.
     Electret lavaliere mic1.7 uA to 170 uA before limiting. Greater than 5000 uA (5 mA) with limiting.
     Line level input17 mV to 1.7 V before limiting. Greater than 5 V with limiting.
Input impedance
     Dynamic mic300 Ohms
     Electret lavaliereInput is virtual ground with servo adjusted constant current bias
     Line level> 2.7 k Ohms
Input limiterSoft limiter, 30 dB range
Bias voltagesSelectable; 2V, 4V and Off
Gain control range44 dB; panel mounted membrane switches
Modulation indicatorsDual bicolor LEDs indicate modulation of -20, -10, 0, +10 dB referenced to full modulation
ControlsControl panel with LCD and four membrane switches
Low frequency roll-offAdjustable from 35 to 150 Hz
Audio Frequency Response35 Hz to 20 kHz, +/-1 dB
Signal to Noise Ratio (dB): (overall system, 400 Series mode)
     SNR at receiver output (dB)
SmartNRno limitingw/limiting
OFF103.5108.0
NORMAL107.0111.5
FULL108.5113.0
Note: the dual envelope "soft" limiter provides exceptionally good handling of transients using variable attack and release time constants. The gradual onset of limiting in the design begins below full modulation, which reduces the measured figure for SNR without limiting by 4.5 dB
Total Harmonic Distortion0.2% typical (400 Series mode)
Audio Input Jack2.5 mm locking micro; threaded for stainless sleeve on WP connector
AntennaFlexible, unbreakable steel cable.
Batteries1.5 Volt AA lithium
50 mW (2 AA): 13:00
100 mW (2 AA): 10:45
250 mW (2 AA): 5:45
Weight5.33 oz. (151 grams) with lithium batteries
Housing Dimensions2.98 x 2.55 x 0.77 inches
75.7 x 64.8 x 19.6 mm
(including battery caps)
Emission Designator180KF3E

Specifications subject to change without notice

More +

Shipping Rate Calculator

 

Also Popular