Have a Question? Contact Us

888-462-7828 Live Chat

Mackie PPM608 8 Channel 1000 Watt Powered Mixer (with FX)

  • Dale #:

    MACK-PPM608
  • Availability:

    Reserve Yours Now
  • This item usually ships within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

Ultra-light and completely self-contained, the Mackie PPM608 Professional Powered Mixer features two ridiculously robust power amps for mains and/or monitors (500W + 500W). With 1000 watts of system power, this mixer provides more raw power than the competition. Things can get pretty intense out ... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

Ultra-light and completely self-contained, the Mackie PPM608 Professional Powered Mixer features two ridiculously robust power amps for mains and/or monitors (500W + 500W). With 1000 watts of system power, this mixer provides more raw power than the competition. Things can get pretty intense out there and your gear needs to be able keep up the pace. Manufacturer custom designed the PPM608 with Class-D amps, which run cool and boast maximum efficiency to keep your sound pumping until they start kicking people out. We had to include Mackie’s proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. The PPM608 is fully armored inside a solid steel chassis, helping to protect the electronics from any potential environmental hazard (Think beer.) Extremely durable polycarbonate ABS end caps will protect the PPM608 from years of abuse caused by tossing it in and out of the truck or falling off the stool at rehearsal. Each PPM608 features rounded front with recessed controls, so if it rolls on its face in the van or gets kicked over at the show, you can be sure that it will emerge damage-free. Two metal side handles allow you to easily pick it up and get going.

Features

  • Full-featured 8-channel, 1000W, ultra-light Professional Powered Mixer with onboard 32-bit digital RMFX+™ processor
  • 500W + 500W Mackie designed Class-D, Fast Recovery™ power amplifiers
  • 32-bit RMFX+™ processor featuring 24 “Gig Ready” reverbs, choruses, and tap delay for live applications
  • 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
  • New Dedicated In-line Compression provides increased presence and punch for vocals and instruments
  • 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
  • Mackie's 3-band active channel EQ (80hz, 2.5kHz, 12kHz)
  • 2 built-in DI boxes for direct instrument connections
  • Separate Monitor and FX auxiliary sends
  • Dual 7-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
  • 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
  • Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
  • Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig.
  • Built like a tank and armored in poly carbonate ABS, the PPM608 features classic Mackie rounded front chassis design. So if the PPM rolls on its face during transport the controls are recessed and protected
  • Ultra-Lightweight and portable (24.8lbs / 11.2kg)
     

More +

Product Specs

Noise Characteristics
Equivalent Input Noise(EIN), mic input, 150O source Impedance, 20Hz to 20kHz -128dBu
(1kHz, 30kHz bandwidth)
Main mix level down, all channel levels down-95dBu
Main mix level 0dB, all channel levels down-86dBu
Main mix level 0dB, all channel levels 0down-77dBu
Gain
Mic mono input25dB/45dB
Line mono inputs0dB/20dB
Line stereo inputs0dB
Frequency Response
Mic mono input(+0/-3dB)<10Hz to 8kHz
Line mono inputs(+0/-3dB)<10Hz to 40kHz
Line Stereo inputs(+0/-3dB)<0Hz to 75kHz
Distortion(THD+N)
(1kHz, 30kHz bandwidth)
Mic Mono<0.005%/<0.007%
Line mono<0.005%
Line stereo<0.003% at main out
Maximun Input Levels
Mic mono input-5dBu/-25dBu
Line mmono inputs+21dBu/+1dBu
Line stereo inouts+21dBu
Maximum Output Levels
Preamp main and monitor outputs+21dBu
Loud Speaker Output
(Both channels loaded and driven at 1kHz)
Peak Output Power @ 4Ω2×500W peak
RMS output power @ 4Ω2×250W rms,1% THD
2×300W rms,3% THD
RMS output power @ 8Ω2×150W rms,1% THD
2×180W rms,3% THD
Recommended load impedance4-8Ω per channel
Equilization
High Shelving±15dB @ 12kHz
Mid Peaking±15dB @ 2.5kHz
Low Shelving±15dB @ 80Hz
7-Band Graphic EQ Main and Monitor1±15dB @ 63,125,250,500,1k, 2k, 4k, 8k,and 16kHz
Digital Effects
Processor32-bit
I/OMono input/Stereo output
Number of presets24
Impedances
Mic mono input3.6kΩ balanced
Line mono input20kΩ balanced
Line mono input, ch 5, 6 Hi-Z500kΩ balanced
Line stereo inputs20kΩ balanced
Main and monitor outputs240kΩ balanced
120kΩ balanced
AC Power Requirements
US100-120 VAC, 50-60Hz, 160W
EU200-240 VAC, 50-60Hz,160W
AC Connector3-pin IEC 250 VAC
Operating Temperature0º-40ºC
32º-104ºF
Physical Properties(packaged product)
Height15.2in/386mm
Width22.1in/581mm
Depth15.2in/386mm
Shipping Weight30.6lb/13.9kg
Physical Properties(product)
Height12.3in/314mm
Width19.3in/490mm
Depth11.4in/290mm
Net Weight24.8lb/11.2kg
Options
Mixer BagP/N 093-011-00
Odering InformationPPM608 8-Channel Professional Powered Mixer, US P/N 0026939-00
PPM608 8-Channel Professional Powered Mixer, EU P/N 0026939-01

More +

Shipping Rate Calculator

 

Also Popular