Neumann BCM-104 Large Diaphragm Condenser Broadcast Microphone

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:NEUM-BCM104

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • Broadcast microphone with a condenser capsule and a functionally optimized design, featuring integrated pop protection, suppression of structure-borne noise and a cardioid directional characteristic.

    Emotion conveyed with technical perfection. This is the ideal which the Neumann microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the requirements of professional broadcast studios and the individual, functionally optimized design* ensure that these are microphones of character.

    With its large-diaphragm condenser capsule and cardioid directional characteristic, the BCM 104 is ideal for the faithful reproduction of speech and music. This is due, for instance, to the frequency response that is flat up to 3 kHz and then gradually boosted in the higher frequencies. If required, internal switches can be used to compensate for the proximity effect and to reduce the sensitivity by 14 dB. The versatility of the BCM 104 can be seen in its wide range of applications, from news, to round-table discussions, to radio plays, to musical recordings.

    Features:

    • Large-diaphragm condenser capsule
    • Cardioid directional characteristic
    • Characteristic, functionally optimized design
    • Integrated, neutral pop protection
    • Integrated elastic suspension
    • Individual headgrilles for different users
    • Colored rings to identify the replacement headgrilles
    • Easy removal and cleaning of microphone headgrille (with bayonet mount)
    • Mechanical compatibility with standard studio boom arms
    • Internal switches: high-pass and pre-attenuation

    Mechanical Features
    The microphone headgrille twists off easily for quick cleaning. Neumann offers optional color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her individual headgrille. In front of the capsule, mounted on a frame holder, a fine gauze serves as a built-in popscreen.

    The microphones of the Broadcast Line have an elastic mount against structure-borne noise, that is compatible with standard broadcast-segment microphone arms.

    Acoustic features
    The microphone headgrille houses the K 04 large-diaphragm capsule, which has a flat frequency response up to 3 kHz. Higher frequencies have an increased presence up to 2 dB.

    Since the above-mentioned microphone characteristics are obtained without the use of resonance effects, the microphone features excellent transient response and transmits all transient phenomena of music and speech without any coloration.

    The integrated Pop Screen
    A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.

    Electrical features
    Instead of a transformer to couple the microphone output to the supply voltage, the BCM 104 has an electronic circuit which, like a transformer, provides for good common mode rejection.

    Interference induced in the balanced modulation line is thus suppressed effectively.

    With a very low self-noise of 7 dB(A), and an overload capability extending to 138 dB SPL, the BCM 104 has a dynamic range of 131 dB (A-weighted).

    Filter and Preattenuation
    The BCM 104 amplifier has a linear operation down to 20 Hz. An active filter efficiently suppresses signals below this frequency. In order to compensate for the proximity effect, an electronic high-pass filter, activated by a switch, is built into the microphone. This filter reduces frequencies below 100 Hz by 12 dB/octave.

    A 14-dB preattenuation switch is provided in order to adjust the sensitivity, if necessary, to circuits designed for dynamic microphones. But this will increase the self noise accordingly.

    Both switches are located inside the microphone housing, since they will normally be operated only once, when the broadcasting facility is set up.

    Mounting
    The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio boom arm.

    A thread adapter to fit different connector threads is included. In order to provide protection from structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.

    The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.

  • Acoustical operating principlePressure gradient transducer
    Directional patternCardioid
    Frequency range20 Hz ... 20 kHz
    Sensitivity at 1 kHz into 1 kohm22 mV/Pa
    -14 dB attenuation4.4 mV/Pa
    Rated impedance50 Ohms
    Rated load impedance1000 Ohms
    Equivalent SPL CCIR 468-318 dB
    Equivalent SPL DIN/IEC 6517 dB-A
    Maximum SPL for THD 0.5%138 dB
    Maximum SPL for THD 0.5% with preattenuation152 dB
    S/N ratio CCIR 468-376 dB
    S/N ratio DIN/IEC 65187 dB
    Maximum output voltage10 dBu
    Dyn. range of the mic. amplifier DIN/IEC 651131 dB
    Supply voltage48 V ± 4 V
    Current consumption3.2 mA
    Matching connectorXLR 3F
    Weight500 g
    Diameter64 mm
    Length85 mm
  • Shipping rates calculator