Have a Question? Contact Us

888-462-7828 Live Chat

Neutrik NA2-IO-DPRO - 2-Input 2-Output Analog to Dante Interface

 
  • Dale #:

    NEUT-NA2IODPRO
  • Availability:

    In Stock
  • Available for immediate shipment or pick-up from our Jamaica, NY warehouse. In-store pick-up is available Monday through Friday 8:30 am to 5:30 pm.

Description

The NA2-IO-DPRO is a 2IN, 2OUT breakout box designed to connect legacy audio equipment with the Dante® network. It features high-quality microphone preamps and 2 Dante® ports for either redundant setup or daisy chaining. Audio parameters are adjusted either by Neutrik's DPRO controller or a numbe... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The NA2-IO-DPRO is a 2IN, 2OUT breakout box designed to connect legacy audio equipment with the Dante® network. It features high-quality microphone preamps and 2 Dante® ports for either redundant setup or daisy chaining. Audio parameters are adjusted either by Neutrik's DPRO controller or a number of common control software.

All connectors are lockable and, together with the removable rubber protection, offer a reliable solution for tough stage conditions. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, racks or on a truss.

Features:

  • Lockable audio and network connections
  • Connect up to two analog line or mic signals to a Dante® network
  • Connect AES/EBU signals to a Dante® network and provide an AES/EBU signal from the Dante® network
  • Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
  • Primary and Secondary Dante® ports
  • Setting of all audio parameters via the DPRO controller software. Yamaha CL/QL mixer, QSYS plug in and Crestron module
  • Different mounting options (rack, truss, floorbox, table mounting)
  • Requires a Power over Ethernet switch or a PoE injector (802.3 af/at/bt)

More +

Product Specs

Dante specifications
Channels 2 INPUTS (Line Level / Mic / AES / EBU)
2 OUTPUTS (Line Level / Mic / AES / EBU)
Supported sampling rates 44.1 / 48 / 88.2 / 96 kHz
Bit depth 16, 24 and 32 Bit
Latency based on user selection 0,25 ms (Dante)
Ethernet connection 1.000 BASE-T (supporting PoE)
Electrical specifications
Power consumption 6 watts (IEEE 802.3 af/at/bt - class 2 or higher)
Power supply 44 - 57 V DC (according to IEEE 802.3 af/at/bt)
Power source PoE Injector / PoE Switch passive / active
Analog audio input
Equivalent input noise -128 dBu (67 dB Gain); A-weighted
Gain hub (3 dB Steps) 0 – 67 dB
Max. input level +24 dBu (PAD enabled)
+8 dBu (PAD disabled)
Input impedance 7.5 kOhm, balanced
Frequency response 20 Hz to 20 kHz (± 0.5 dB)
Dynamic range 112 dB, BW 22.4 kHz, A-weighted (input gain = min.)
Signal-to-noise ratio 112 dB, BW 22.4 kHz, A-weighted
THD + noise 0.005 % (20 Hz to 20 kHz, +4 dBu)
Crosstalk -100 dB, adjacent INPUT/OUTPUT channels (input gain = min.)
Analog audio output
Output impedance 150 Ohm, balanced
Max. output level +24 dBu
Residual output noise -88 dBu, A-weighted
Frequency response 20 Hz to 20 kHz (± 0.5 dB)
Dynamic range 112 dB, BW 22.4kHz, A-weighted
Signal-to-noise ratio 112 dB, BW 22.4kHz, A-weighted
THD + noise 0.005% (20 Hz to 20 kHz, +4 dBu)
Crosstalk -100dB, adjacent INPUT/OUTPUT channels (input gain = min.)
Mechanical specifications
Weight 0.53 kg / 1.17 lbs
Dimensions (with rubber protection) L = 164 mm (6.4 inches)
B = 82 mm (3.2 inches)
H = 51 mm (2.0 inches)
Dimensions (without rubber protection) L = 151 mm (5.9 inches)
B = 66 mm (2.6 inches)
H = 41 mm (1.6 inches)
Operating environment Indoor
Operating temperature 0 °C to +50 °C
Storage temperature –40 °C to +70 °C
App Requirements
RAM min. 2 GB
Display resolution min. 1280 x 1024 px
Operating System Windows 7 or later
MAC OS X 10.12 or higher

More +

Shipping Rate Calculator

 

Also Popular