Availability: Usually ships in 5 - 10 Days
Our Price: $695.00
The Minilyzer ML1 is a powerful, complete audio analyzer in a palm-sized format. Its comprehensive set of easy to access measurement functions simplify the process of system verification, diagnostics and repairs of even very complex audio installations. The smart user interface aids operators of all skill levels by setting all ranges automatically and providing complete results on a single screen.
Continuously measures absolute input levels either in volts, dBu or dBV and the signal frequency. Relative measurements are also supported. Connecting MiniSPL further supports basic SPL and LEQ measurements (SPL/LEQ).
Supports Total Harmonic Distortion plus Noise (THD+N) and 2nd to 5th selective harmonic distortion as dB value or in %. Input level and frequency measurement runs in parallel and balance indicator finds defective cables.
ML1 automatically triggers to a sweep sequence with any step width and records the frequency response. The Minirator MR2 or MR-PRO may be used as signal source. After capture all sweep data is available.
Finding wrongly connected speakers is as simple as moving ML1 into the sound field of the speaker under test and its polarity will be displayed. The same measurement through the XLR input is ideal for cable tests.
Intermittent faults are often hard to find. The time sweep records the RMS level, frequency and the THD+N value simultaneously, helping to monitor the audio signal during a long period of time for later analysis.
Provides a quick and robust look at the waveform of the balanced audio signal, quickly finding clipping amplifiers etc. The auto-scale and auto-trigger functionality are normally only found in expensive stand alone scopes.
Analyze and improve sound systems using the 1/3rd Octave analyzer. With Pink Noise as a stimulus the frequency response of every sound system is directly visible on the Minilyzer screen. The peak frequency display supports you in feedback improvements.
Do you have to supply your mix to a broadcast van? By using the vu&ppm meter with free adjustable reference levels you can provide a perfect leveled signal. The vu meter enables you to adjust your outboard equipment for a perfect compression of your sound material.
Induction Loop Measurements AFILS
The Minilyzer together with the optional MiniLINK USB interface measures induction loops AFILS according standard IEC60118. A complete measurement menu following the standard can be enabled including calibration to customer field sensors.
|Measurements||Level-RMS, Level-SPL, Level-LEQ, Level-Relative, THD+N, vu+PPM, Polarity Test, Signal Balance Error, Frequency Sweep, Time Sweep, 1/3rd Octave Spectrum, ScopeFrequency, AFILS measurements (with MiniLINK)|
|vu + PPM||vu-Indicator and Peak Program Meter|
According to IEC 60268 and DIN 45406, PPM Type I, IIa and Nordic.
Both meters with adjustable reference and with analog & numerical peak-hold readout.
|Polarity Test||Positive / Negative detection through internal microphone or XLR/RCA connector. Checks polarity of tweeters, midrange-speakers, woofers, sub-woofers and cables. Down to 10 dB S/N ratio of input signal. MR2 or MR-PRO provides the test signal.|
|Balance Error||Indication range 0.0 % to 100 %|
Deviation from perfect balance in % or *1
|Sweep||Frequency Sweep: Level as function of frequency.|
Time Sweep: Measurement of level, THD+N and frequency as function of time.
|1/3rdOctave||Spectrum acc. IEC 1260, class II and ANSI S1.11-1976, class II from 50 Hz to 20 kHz, Bargraph for LevelRMS 20 Hz to 20 kHz|
|Scope||Auto triggering, auto ranging, auto scaling|
|Filters||Linear, A-weighting, C-weigting, C-message, Highpass 22 Hz / 60 Hz / 400 Hz, X-Curve-1, Voice bandpass|
|Input Connectors||XLR balanced, RCA unbalanced|
|Impedance||40 kOhm balanced, 20 kOhm unbalanced|
|Max. AC Input||balanced +20 dBu (7.75 VRMS), unbalanced +14 dBu (3.8 VRMS)|
for input levels > 20 dBu (balanced) the Adapter -20 dB is available as accessory
|Max. DC Input||± 50 VDC|
|Residual Noise||< 12 µV, XLR-input shorted|
|Internal Mic||Omni directional (for polarity and delay measurement only)|
|Monitor Output||Jack 3.5 mm (1/8“), suitable for all common headsets|
|Display||Graphic LCD 64 x 100 pixel, with backlight|
|Batteries||3x AA batteries (alkaline)|
Typical battery lifetime > 16
|Dimensions||163 x 86 x 42 mm (6.4“ x 3.38“ x 1.63“)|
|Weight||300 g (10.5 oz) incl. batteries|
|Temperature||0° to +45° C (32° to 113° F)|
|Humidity||90 % R.H., non condensing|
NTI Acoustic Set Pro contains the instruments and accessories for acoustical testing as a complete kit packed in the protective Minstruments Case.The Acoustic Set Pro includes: Minirator MR-PRO Acoustilyzer AL1 MiniSPL MiniLink USB for AL1 Adapter -20dB for AL1 Cable...View full product details
The Digilyzer DL1 is a powerful but easy to use digital audio analyzer. Testing, monitoring and troubleshooting digital audio interfaces is fast and straight forward using this compact tool. Virtually all digital audio formats including ADAT and sampling frequencies up...View full product details
The Digital Analyzer Set contains the instruments and accessories for digital line testing as a complete kit packed in the protective Minstruments Case.The Digital Analyzer Set includes: Digilyzer DL1 with MiniLINK AES3id 110 ohm Transformer for DL1 Minstruments Case The...View full product details
This set includes theXL2 Audio and Acoustic Analyzer with M4260 Measurement Microphone, Class 2. The XL2 analyzer forms the unique combination of a state-of-the-art Sound Level Meter, a comprehensive Acoustical Analyzer as well as a powerful Audio Analyzer. The wide...View full product details
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST