Powersoft DIGAM K20 18,000 Watts at 2 Ohms 2 Channel High Efficiency Power Amplifier

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:POWS-K20

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Shipping Charges Apply
  • Powersoft DIGAM K20 18,000 Watts @ 2 Ohms 2 Channel Power AmplifierDIGAM K Series has become the flagship of Powersoft's technologies, ranking in the Top Class amplification of the global pro audio market. It represents a new milestone of switch mode amplification providing incredible power in 1 rack unit with the lowest weight and highest efficiency. It's sonic performances set a new target for professional audio market.

    Features

    • Advanced switch-mode worldwide operating power supply technology for high performance and compact sizee
    • Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
    • Variable speed fan for low noisee
    • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
    • XLR female / 6.3mm Jack Neutrik style input connectors with link capability
    • Built-in defeatable Clip limiters for each channel
    • LCD matrix interactive displayy
    • Digital gain-attenuator control
    • User selectable maximum output power for each channel
    • User selectable maximum mains current draw
    • Comprehensive-user friendly front panel display menu
    • Fully protected circuitry design including DC, infrasonic, high frequency, thermal overload and short circuit

    Protections circuitry

    DC protection: protects against infrasonic signals
    VHF protection: protects the loudspeakers against strong very high frequency non-musical signals above the audible range.
    Thermal protection: prevents the amplifier from being overheated. The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated.
    AC protection: shuts down the power supply if the line voltage is outside the operating voltage.
    Clip limiter: prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining full peak power.

    Additional Features:

    • Temperature forecast with LCD traced historical behaviour
    • Downloadable log file of functional fault events with time related trace
    • Load impedance measurement / display for each channel
    • Output power measurements / display for each channel
    • Mains voltage and current measurements / display
    • Defeatable gate selection for each channel
    • Gain/sensitivity user selection capability
    • Hardware monitor available for fast local diagnostic
    • Fixed frequency switchmode output stage for high grade sound accuracy
    • Compact size - all models only 1 RU for reduced rack cost and spacee
    • Light weight - all models only 12 kg (26 pounds) for easier racking and shipping
    • Built in Remote Control ( RS 485 interface ) for full diagnostic, operational setting and system monitoring
    • Smart Card settings , parameters and upgrades functionality
    • Lockable set-up by user selectable access key code
    • DSP option capability
    • Ethernet option capability
  • Power Output2 Ohm dual4 Ohm dual8 Ohm dual4 Ohm bridged 8 Ohm bridged 16 Ohm bridged
    9000 W5200 W2700 W18,000 W10400 W5400 W
    Power requirementsAC:95 - 265V (50/60Hz)
    Power factor cos(fi)More than 0.95 from 200 W to full power
    Operating temperatureO°C / + 45° C
    Weight12 Kg
    External dimensionsStandard rack 19, 1 unit ( H ), 475 mm ( D )
    Consumption average2300 VA ( K10 @ 1/8 maximum output power)
    Bandwith ( 1 W, 8 ohm )5Hz – 30KHz
    Damping factor ( 8 ohm )>5000 (20Hz-200Hz)
    Slew rate ( 8 ohm )50V /uS ( input filter bypassed )
    S/ N ratio A-Weighted 20Hz-20KHz> 112dB (K20), >110dB (K10), >109dB (K8), >108dB (K6),
    DistortionTHD : Max < 0.5% From 0.1W to full power (tipically < 0.05%)
    Intermodulation SMPTEMax < 0.5% From 0.1W to full power (tipically < 0.05%)
    Intermodulation DIM 30Max < 0.5% From 0.1W to full power (tipically < 0.05%)
    InputBalanced to ground , XLR female combo jack 6.3 mm
    Impedance10 Kohm each leg, electronically balanced to ground
    Gain/ Sensitivity26dB; 29dB; 32dB; 35dB user selectable
    OutputHigh current Neutrik 4-pole Speakon connectors ( pins 1+ 2+ paralleled, 1-2-paralleled)
  • Shipping rates calculator