QSC PLX3602 Lightweight Two-Channel Stereo Power Amplifier 775W at 8 ohm / 1250W at 4 ohm


Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:QSC-PLX3602

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.

    The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
  • STEREO MODE, both channels driven
    8 ohms
    FTC 20 Hz - 20 kHz 0.05% THD
    EIA 1 kHz 0.1% THD
    725 W
    775 W
    4 ohms
    FTC 20 Hz - 20 kHz 0.05% THD
    EIA 1 kHz 0.1% THD
    1100 W
    1250 W
    2 ohms EIA 1 kHz 1% THD1800 W
    8 ohms
    20 Hz-20 kHz 0.1% THD
    EIA 1 kHz 0.1% THD
    2500 W
    2600 W
    4 ohms 1 kHz 1% THD3600 W
    Signal to Noise (20 Hz - 20 kHz) -107 dB
    Input Sensitivity @ 8 ohms1.25 Vrms
    Gain @ 8 ohms 36 dB
    Output Circuitry2-Tier Class H
    Distortion (SMPTE-IM)Less than 0.02%
    Typical Distortion
    1/8 rated power, 20 Hz-20 kHz
    Full rated power, 20 Hz-20 kHz
    Less than 0.02%
    Less than 0.02%
    Frequency Response 20 Hz-20 kHz, -0.5 dB
    Damping Factor Greater than 500
    Input Impedance20k ohms balanced
    10k ohms unbalanced
    Input Clipping11 Vrms (+21 dBu)
    Cooling Variable-speed fan, rear-to-front air flow
    Input Connectors, each channel3-pin XLR and 1/4 TRS balanced
    Output Connectors, each channelNeutrik® NL4 Speakon® and Touch-proof binding posts
    (Both channels available on Ch 1 NL4 connector)
    Rear Panel SwitchesInput Configuration: Bridge/Stereo/Parallel
    Clip Limiters each channel
    Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)
    Front Panel Controls Detented Input Attenuator: 0 to ∞ dB
    Power On/Off
    Front Panel IndicatorsClip: Red LED
    -10: Green LED
    Signal (-35 dB): Green LED
    Power: Blue LED
    Parallel: Amber LED
    Bridge Mono: Amber LED
    Amplifier ProtectionFull short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
    Stable into reactive or mismatched loads
    Load Protection On/off muting, DC-fault power supply shutdown
    Infrasonic -3 dB, 5 Hz
    DC faultPower supply shutdown
    Ultrasonic-3 dB, 85 kHz
    Short Circuit Cutback
    Thermal Muting at 90° C
    Over CurrentActive clip limiting
    Power supply cutback
    High LineStandard +15%, survive +25%
    Low Line-33%
    Depth, Rack mounting surface to rear panel
    Overall Depth
    3.5 (8.9 cm) 2 rack spaces
    19 (48.3 cm)
    12.8 (32.6 cm)
    14.875 (37.9 cm)
    Weight21 lbs. (9.5 kg) net
    26 lbs. (11.8 kg) shipping
    Agency ApprovalsCE, FCC, cUL, UL
    1/8 Power (pink noise)
    8 ohms
    4 ohms
    2 ohms 7.7A/120V
    11.5A / 120V
    18A / 120V
    1/3 Power (pink noise)
    8 ohms
    4 ohms
    2 ohms
    19.5A / 120V
    31A / 120V
    Full Power
    8 ohms
    4 ohms
    2 ohms
    40A / 120V
    63A / 120V
  • Shipping rates calculator