Contact Our Expert Sales Team:

888-462-7828

Quested V2104 - Active Two-Way 4-Inch Reference Monitor

 
  • Dale #:

    QUES-V2104
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Description

The V2104 is the latest model in Quested's V-Series range of active, powered, monitors. The compact, ported, direct radiator design utilises a 4"/100mm paper cone bass driver and a 28mm /1 1/8th" soft-dome high frequency unit. Power is derived from a 2-channel class D module, chosen primarily for... Read More

Contact us

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The V2104 is the latest model in Quested's V-Series range of active, powered, monitors. The compact, ported, direct radiator design utilises a 4"/100mm paper cone bass driver and a 28mm /1 1/8th" soft-dome high frequency unit. Power is derived from a 2-channel class D module, chosen primarily for its sonic performance and also for its compact dimensions keeping the cabinet size to an absolute minimum. The diminutive size of the V2104 makes it the perfect choice for a portable monitor.

Low frequency performance can be seamlessly extended by using either the SB10 or QSB112 sub-woofers depending on speaker configuration, stereo, 5.1 etc. The self-powered model will be joined shortly by a remote-powered version with rack mountable amplifiers, perfect for use in locations such as a remote broadcast trucks. Performance will be maintained with up to 50 meter speaker cables. Ceiling and wall mounts are currently available, a floor stand will follow as will a smaller dedicated sub-woofer, the SB8.

More +

Product Specs

Dimensions 132(w) x 262(h) x 160(d) mm / 5.1″(w) x 10.3″(h) x 6.2″(d)
Weight 3.5kg / 7.7lb
Drivers Low Frequency 1 x 100mm(4″) LF
High Frequency soft dome – 1 x 28mm (1. 1/8″)
Maximum SPL 100 dB continuous pink noise @ 1m Leq 1 minute. 106 dB per pair continuous pink noise @ 1m Leq 1 minute
Frequency Response 100 Hz – 19 kHz ± 2dB / 88 Hz -6 dB
INPUT
Connector XLR and ¼ inch Jack combo socket
Impedance 10k ohm Electronically balanced
Wiring Pin 1 ground, Pin 2 hot, Pin 3 cold
Sensitivity TBC
FILTERS
Protective lower filter -3dB @ 45Hz, 24dB/oct
Protective upper filter -3dB @30kHz, 24dB/oct
Crossover Point 1k67H
POWER AMPLIFIERS
HF output power 70W rms continuous
LF output power 70W rms continuous
THD Typ 0.01% @ 1kHz
INDICATION
Power on Front mounted switch with ring mounted LED
Blue LED indicates power, Red LED 2 dB before amplifier clip
POWER REQUIREMENTS
Voltage Set by internal plugs: nominal 115V or 230V @ 45-63Hz AC
230V setting Min 180V (restricted output power): Max 264V
115V setting Min 90V (restricted output power): Max 132V
CONSUMPTION
Quiescent TBC
Typical use TBC
Max 10W at 230 Vac
Regulatory This product is built to conform to the requirements for CE marking

More +

Shipping Rate Calculator

 

Also Popular