Have a Question? Contact Us

888-462-7828 Live Chat

Radial Engineering JX-62 6-In/2-Out Guitar and Amp Switcher

  • Dale #:

    RADI-JX62
  • Availability:

    Reserve Yours Now
  • This item usually ships within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

The Radial JX62 is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment. It features Radial's award winning 100% discrete, class-A buffers for optimal signal transfer without distortion or artifact and isolated outputs to eliminate hum and b... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The Radial JX62 is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment. It features Radial's award winning 100% discrete, class-A buffers for optimal signal transfer without distortion or artifact and isolated outputs to eliminate hum and buzz caused by ground loops.

Features:

  • Select between 6 guitars and 2 amps
  • 100% discrete, class-A buffers for best sound
  • PFL and headphone amp for system checks
  • 2 built-in Radial DI boxes for acoustic guitars

Housed in a 1 RU, 19" rack enclosure, the JX62 begins with 6 input channels, all of which are equipped with 1/4" input and separate thru for a dedicated amplifier plus a trim control to balance the signal levels. Channels 1 and 2 are supplemented with Drag Control load correction to optimize tone when using wired connections. Channels 5 and 6 are equipped with dedicated Radial DI box outputs to send a 'clean' acoustic or bass signal direct to the PA system. Any or all channels may be active at one time and routed to a master bus which offers choice of AB outputs and features an effects loop for pedal trays. Both AB outputs are transformer isolated to eliminate ground loops and equipped with ground lift switch and polarity reverse to phase align amps if reversed. Both XLR and 1/4" outputs are available for greater flexibility. Switching between outputs may be done from the front panel via an optional Radial JR2 remote footswitch.

For the stage tech, the JX62 sports a PFL (pre-fade-listen) and headphone amp that enables any or all inputs to be monitored without affecting the output. A separately buffered tuner/monitor output on the front panel follows the PFL select and may be used for quiet tuning.

More +

Product Specs

Audio circuit type: Class-A buffers with optical switching
Frequency response: 20Hz ~ 20kHz (± 1dB)
Dynamic range: 120dB
Maximum input: +18dBu
Total harmonic distortion: 0.007%
Phase deviation: <10° @ 50Hz
Intermodulation distortion: 0.027%
Equivalent input noise: -94.7dBu
Noise floor: -89.7dBu
Input impedance: Variable from 22K Ohm to 1M Ohm
Output impedance - XLR Output: 680 Ohms
Output impedance - Phone Output: 3500 Ohms
Clip Level - Headphone Output: 5V RMS (Really loud!)
Gain - Channel Input to XLR Output: +5dB
Clip Level - Front Panel Tuner Out: +22dBu
Clip Level - Channel Output: +22dBu
Connections  
Unbalanced Inputs: 6 x 1/4" hi-Z guitar inputs
Unbalanced thru-puts: 6 x 1/4" hi-Z guitar thru-puts
Unbalanced outputs: 4 x 1/4" hi-Z amplifier outputs, 2 x tuner out
Balanced outputs: 4 x XLR lo-Z XLR male
Effects loop: 1/4" send & receive
Remote: 1/4" TRS & XLR for optional JR2 remote
General  
Power: External supply 500mA with XLR-4 connector
Construction: 14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: 17.5" x 6" x 1.75" (44.5 x15.25 x 1.75cm)
Weight: 6.95lbs (3.2kg)
Shipping size 22" x 10" x 4.5" (55.9 x 25.4 x 11.4cm)
Shipping weight 9.2lbs (4.2kg)
Warranty: Radial 3-year, transferable

More +

Shipping Rate Calculator

 

Also Popular