Rolls MX56C Minimix A/V Mixer with XLR, RCA, 1/4" and 1/8" Connectors

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:ROLL-MX56C

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The MX56c, an upgrade to the Rolls MX56s, features four inputs including a mono 1/4 line input, a stereo 1/8 (3.5mm) line input, a balanced XLR microphone input with jumperable phantom power, and a stereo RCA line input.

    FEATURES:
    • Stereo RCA Input
    • XLR Mic Input
    • 1/4" Mono Instrument/Line Input
    • 1/8" (3.5mm) TRS Stereo Line Input
    • Stereo RCA Outputs
    • 1/4" TRS balanced Mic/Line Output
    • 1/8" TRS Stereo Headphone Out
    • 9V Battery operation

    A variety of outputs have also been included on the MX56c. In addition to rear panel stereo RCA outputs, the MX56c offers a front panel stereo 1/8" (3.5mm) headphone/earphone output, and a 1/4" Tip-Ring-Sleeve balanced mic out. A power switch is located on the front panel, and the unit operates on a 9V alkaline battery or the included Rolls PS27 12VDC adapter.

    FRONT PANEL:pwr SWITCH: When pressed IN, applies power to the MX56c;pwr LED: Located just below the Power Switch, this LED Indicates the MX56c is connected to a power source (battery or AC adapter), and the unit is on.;PHONE OUT: 1/8" (3.5mm) TRS stereo jack for connection to stereo headphones or earphones.;MONO INST / MIC OUT: 1/4" TRS balanced mic level output jack for connection to another mixer's microphone input, or to an instrument amplifier.;

    REAR PANEL:BATTERY 9V: Compartment for housing the 9V alkaline battery.;DC POWER INPUT: Connects to the Rolls PS27; 12 - 16 VDC 150 mA power supply. The inside of the jack (the post) is negative, the outside is positive.;STEREO OUT: Stereo RCA jacks with the main mixed signal at line level.;

    STEREO LINE (Ch 1): Stereo RCA jacks for connection to a line-level source such as a CD, cassette or video player. ;PHANTOM POWER: The square hole between Line In 1 and Mic In 2 has the phantom power jumper. To engage the phantom power, carefully pull out the jumper with a pair of needle-nose pliers and replace it in a horizontal position so the jumper shorts the two pins together.

    MICROPHONE (Ch 2): XLR input jack for connection to a dynamic or condenser microphone. If you are using a condenser type microphone make sure the Phantom Power jumper is shorted together as described above.

    STEREO LINE (Ch 3): 1/8" (3.5mm" Tip-Ring-Sleeve stereo jack for connection to a line-level stereo signal source such as a laptop computer. MONO LINE (Ch 4): 1/4" Tip-Sleeve mono jack for connection to a mono line-level source such as the output of an instrument, or wireless microphone receiver

  • Connectors
    Input1/4 unbal;1/8 (3.5 mm) stereo;XLR bal;Stereo RCA
    OutputStereo RCA Line Level;1/8 TRS Stereo Phone;1/4 TRS Instrument or Mic Level, bal.
    Max GainCh 1:15 dB;Ch 2: 60 dB;Ch 3: 15 dB;Ch 4: 40 dB
    Channel Crosstalk-70 dB
    Phantom Power9 - 16 VDC depending on power source
    Max Output+ 12 dB
    S/N Ratio>80 dB
    THD<.05%
    Box Size6.5 x 2.7 x 1.55
    Weight2 lbs.
  • Shipping rates calculator