Sabine FBX-1210 24-Bit Single-Channel Feedback Eliminator

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SABI-FBX1210

Availability: In Stock

Available for immediate shipment and pick-up from our Jamaica, New York location. In-store pick-up is available Monday through Friday from 8:30 am to 5:30 pm
Free Shipping (Continental US)
  • Since Sabine first invented digital automatic feedback control in 1991, FBX Feedback Exterminators have set the standard for transparent and reliable automatic feedback control. Now Sabine is proud to announce the latest innovation in automatic feedback controllers: the FBX1210 Feedback Controller. The FBX1210 includes the latest improvements to Sabine's patented feedback control algorithms, providing the fastest ever feedback detection and elimination. Sabine's 1Hz placement accuracy means these filters are even more transparent and this means the best just got better.

    Features:

    • Super-fast Automatic Feedback Control
    • Quick and Quiet Setup
    • Increased headroom and reduced noise floor
    • Accurately distinguishes music from feedback
    • Places filters with 1 Hz resolution Transparent - leaves your sound clear and untouched
    • Provides more gain before feedback (6 to 9dB typical)
    • 24-bit Digital Resolution
    • Three-color LED filter display
    • 12 Filters per channel
    • Flexible Filter Controls
    • Dynamic Filter Reset
    • XLR & 1/4€TRS inputs/outputs

    FBX Feedback Exterminators have set the standard for transparent and reliable automatic feedback control. The power of the FBX with SMARTFilters lies in its ability to control feedback during the program, placing a filter that only kills the feedback, not the sound and power you work so hard to achieve.

    Speed
    The industry's best digital signal processors that run the SMARTFilter algorithm give the new FBX1210 a distinct speed advantage over all other automatic feedback controllers. And in Setup Mode the speed is increased, so you can complete your entire setup of the FBX in less than 30 seconds. The 24-bit FBX is constantly on the watch for feedback, with filters placed almost immediately (in 0.4 seconds at 1 KHz.)

    Speed of feedback elimination, shown as amplitude over time: The top chart shows the speed of a competitor. Note slow reaction time and longer time to eliminate the feedback. The bottom section shows the much faster FBX.

    Accuracy
    The FBX has always excelled in its ability to make the right decision, and the new SMARTFilter technology makes it even better. Less-sophisticated feedback controllers place filters on any loud tone, but the FBX uses a patented analysis of the harmonic content of your program material. Because feedback is low in harmonics, and music and speech are rich in harmonics, the FBX is able to make the correct and accurate answer to the music or feedback question.

    Bright, multi-color filter display
    You have complete control of the mix between filter types (see the Fixed and Dynamic Filter box above), and the bright, three-color LED display shows you your filter status at all times - you can see it from across the room!

    Filter quality: True Constant Q filters maintain width at any depth when measured at the -3 dB power point. Sabine uses this most rigorous method for computing filter width.

    Resolution
    Many feedback controllers place their filters in the general vicinity of the feedback and then widen the filters until the feedback goes away. The FBX uses a more sophisticated solution.; centering the filter exactly on the frequency that is feeding back. This unique one-Hertz resolution enables the FBX to control feedback with transparent filters that are ten times narrower than graphic equalizer filters. Feedback frequencies are single tones, with almost 20,000 places for them to occur in the audio spectrum.

    Sonic integrity
    Sabine's innovative approach to digital filtering is unique in the industry, with far less phase distortion and a smoother response. Sabine filters maintain their integrity at all depths, providing true Constant Q performance.

    Faster setup
    The FBX1210 gives you the easiest, fastest, and quietest setup procedure. In less than 30 seconds you will be ready to begin audio conferencing or distribution, and the whole process is so quiet you can almost do it without anyone knowing it is happening!

  • FILTERS 12 independent digital notch filters per channel, controlled automatically from 40 Hz to 20 KHz.
    Filter width: user-controllable – either 1/10 or 1/5 octave*, constant “Q”
    Resolution: 1 Hz
    Time required to find and eliminate feedback: 0.4 seconds, typical @ 1 KHz
    Number of Dynamic vs. Fixed filters per channel: user selectable. Last configuration stored in memory.
    INPUT/OUTPUT Input/Output Maximum Signal Levels: Balanced +18dBV peak, unbalanced +18 dBV
    Output Drive: Unit will perform as specified driving a load >600 Ohms
    Input Impedance: Balanced or unbalanced >40K Ohms, PIN 2 high
    Output Impedance: Balanced or unbalanced 150 Ohms nominal, PIN 2 high • Bypass: True power off bypass
    Headroom: 14 dBV @ 4 dBV nominal input, balanced
    I/O Connectors: XLR-3 and 1/4” TRS
    PERFORMANCE Frequency response: 20 Hz - 20 KHz +/- 0.3 dB
    Gain matching: +/- 0.2 dB
    Spectral Variation: + 0.25 dB, 20 Hz to 20 KHz
    SNR - Dynamic Range: >100 dB
    THD: .005% at 1 KHz. < 0.01% 20 Hz - 10 KHz, < 0.025% 10 KHz - 20 KHz
    POWER INPUT 115 VAC: 100 - 130 VAC 50/60 Hz • 230 VAC: 200 - 240 VAC 50/60 Hz
    FUSE 115 VAC, 0.1A, 10W, 0.160 A SB fuse
    230 VAC, 0.06A, 10 W, 0.080 A T fuse
    DIMENSIONS 1-U rack mount; 19 x 1.75 x 6.25 in. nominal (rack mountable); 48.3 x 4.5 x 15.9 cm
    WEIGHT 8.0 lbs. (3.6 kg) nominal
    OPERATING TEMPERATURE Safe operating temperature: -15 to +50 degrees C ambient temperature (5 to 122F)
  • Shipping rates calculator