Live Chat
Shure SLX14/84 Lavalier Wireless System (G5 Band - 494-517 MHz)
Dale #:
SHUR-SLX1484G5Availability:
Reserve Yours NowThis item usually ships within 10-20 days after your order is placed. Your payment will be charged after completing checkout.
Description
SLX Wireless Lavalier System, Includes WL184 Lavalier Microphone, SLX1 Bodypack Transmitter and SLX4 Diversity Receiver. Features a premium supercardioid condenser mic for speech applications.WL183 (Omnidirectional):Recommended for general purpose sound reinforcement, recording, or remote monitor... Read MoreRetail Price: $824.00 Our Price: $659.00
Free Shipping (Continental US)
Suggested Accessories
Description
SLX Wireless Lavalier System, Includes WL184 Lavalier Microphone, SLX1 Bodypack Transmitter and SLX4 Diversity Receiver. Features a premium supercardioid condenser mic for speech applications.
WL183 (Omnidirectional):Recommended for general purpose sound reinforcement, recording, or remote monitoring applications. Low handling noise. Pickup angle: 360 degrees.
WL184 (Supercardioid):Recommended for sound reinforcement applications requiring high rejection of ambient noise and narrow pickup angle. Use of windscreen highly recommended. Pickup angle: 115 degrees.
WL185 (Cardioid):Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise. Use of windscreen highly recommended. Pickup angle: 130 degrees.
SLX1 Wireless Bodypack TransmitterThe SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
SLX4 Wireless ReceiverThe SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
More +
Product Specs
| WL184 Lavalier Condenser Microphone | |
| Type | Condenser (electret bias) |
| Frequency Response | 50 to 17,000 Hz |
| Dynamic Range | 102.5 dB |
| Polarity | Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1. |
| Power Requirements | Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter. |
| SLX1 Wireless Bodypack Transmitter | |
| Operating Range Under Typical Conditions | 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference |
| Audio Frequency Response (+/- 2 dB) | Minimum: 45 HzMaximum: 15 kHz(Overall system frequency depends on microphone element.) |
| Total Harmonic Distortion (ref. +/- 38 kHz deviation, 1 kHz tone) | 0.5%, typical |
| Dynamic Range | >100 dB A-weighted |
| Operating Temperature Range | -18 degrees C (0 degrees F) to +50 degrees C (+122 degrees F) |
| Transmitter Audio Polarity | Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (withrespect to pin 3 of low impedance output) and the tip of the highimpedance 1/4-inch output. |
| Audio Input Level | -10 dBV maximum at mic gain position+10 dBV maximum at 0 dB gain position+20 dBV maximum at -10 dB gain position |
| Gain Adjustment Range | 30dB |
| Input Impedance | 1 M ohms |
| RF Transmitter Output | 30 mW maximum (dependent on applicable country regulations) |
| Dimensions | 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) |
| Weight | 81 grams (3 oz.) without batteries |
| Housing | Molded ABS case |
| SLX4 Receiver | |
| Dimensions | 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.) |
| Weight | 816 g (1 lb. 13 oz.) |
| Housing | Galvanized steel |
| Audio Output Level (ref. +/- 38 kHz deviation with 1 kHz tone) | XLR connector (into 600 ohms load): -13 dBV1/4 inch connector (into 3000 ohms load): -2 dBV |
| Output Impedance | XLR connector: 200 ohms1/4 inch connector: 1k ohmsXLR output:-105 dBm for 12 dB SINAD, typical |
| Sensitivity | -105 dBm for 12 dB SINAD, typical |
| Image Rejection | >70 dB, typical |
| Power Requirements | 12-18 Vdc at 150 mA, supplied by external power supply |
| Operating Range Under Typical Conditions | 100m (300 ft.)Note: Actual range depends on RF signal absorption, reflection, andinterference |
| Audio Frequency Response (+/- 2 dB) | Minimum: 45 HzMaximum: 15 kHzNote: Overall system frequency depends on microphone element. |
| Total Harmonic Distortion (ref. +/- 38 kHz deviation, 1 kHz tone) | 0.5%, typical |
| Dynamic Range | >100 dB A-weighted |
| Transmitter Audio Polarity | Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output. |
More +
Shipping Rate Calculator
Also Popular
Got Questions?
888-462-7828
148-04 95th Ave
Jamaica, NY 11435Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Info
Resources
Payment Options
© 2021 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.
