Shure SLX14/84 Lavalier Wireless System (H19 Band - 542-571 MHz)

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SHUR-SLX1484H19

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • SLX Wireless Lavalier System, Includes WL184 Lavalier Microphone, SLX1 Bodypack Transmitter and SLX4 Diversity Receiver. Features a premium supercardioid condenser mic for speech applications.

    WL183 (Omnidirectional):Recommended for general purpose sound reinforcement, recording, or remote monitoring applications. Low handling noise. Pickup angle: 360 degrees.

    WL184 (Supercardioid):Recommended for sound reinforcement applications requiring high rejection of ambient noise and narrow pickup angle. Use of windscreen highly recommended. Pickup angle: 115 degrees.

    WL185 (Cardioid):Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise. Use of windscreen highly recommended. Pickup angle: 130 degrees.

    SLX1 Wireless Bodypack TransmitterThe SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

    SLX4 Wireless ReceiverThe SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

  • WL184 Lavalier Condenser Microphone
    TypeCondenser (electret bias)
    Frequency Response50 to 17,000 Hz
    Dynamic Range102.5 dB
    PolarityPositive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
    Power RequirementsRegulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter.
    SLX1 Wireless Bodypack Transmitter
    Operating Range Under Typical Conditions100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
    Audio Frequency Response (+/- 2 dB)Minimum: 45 HzMaximum: 15 kHz(Overall system frequency depends on microphone element.)
    Total Harmonic Distortion (ref. +/- 38 kHz deviation, 1 kHz tone)0.5%, typical
    Dynamic Range>100 dB A-weighted
    Operating Temperature Range-18 degrees C (0 degrees F) to +50 degrees C (+122 degrees F)
    Transmitter Audio PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (withrespect to pin 3 of low impedance output) and the tip of the highimpedance 1/4-inch output.
    Audio Input Level-10 dBV maximum at mic gain position+10 dBV maximum at 0 dB gain position+20 dBV maximum at -10 dB gain position
    Gain Adjustment Range30dB
    Input Impedance1 M ohms
    RF Transmitter Output30 mW maximum (dependent on applicable country regulations)
    Dimensions108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
    Weight81 grams (3 oz.) without batteries
    HousingMolded ABS case
    SLX4 Receiver
    Dimensions42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
    Weight816 g (1 lb. 13 oz.)
    HousingGalvanized steel
    Audio Output Level (ref. +/- 38 kHz deviation with 1 kHz tone)XLR connector (into 600 ohms load): -13 dBV1/4 inch connector (into 3000 ohms load): -2 dBV
    Output ImpedanceXLR connector: 200 ohms1/4 inch connector: 1k ohmsXLR output:-105 dBm for 12 dB SINAD, typical
    Sensitivity-105 dBm for 12 dB SINAD, typical
    Image Rejection>70 dB, typical
    Power Requirements12-18 Vdc at 150 mA, supplied by external power supply
    Operating Range Under Typical Conditions100m (300 ft.)Note: Actual range depends on RF signal absorption, reflection, andinterference
    Audio Frequency Response (+/- 2 dB)Minimum: 45 HzMaximum: 15 kHzNote: Overall system frequency depends on microphone element.
    Total Harmonic Distortion (ref. +/- 38 kHz deviation, 1 kHz tone)0.5%, typical
    Dynamic Range>100 dB A-weighted
    Transmitter Audio PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
  • Shipping rates calculator