Shure SLX14 Guitar Wireless System (G5 Band - 494-517 MHz)

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SHUR-SLX14G5

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • SLX Wireless System includes:

    SLX1 Bodypack Transmitter, SLX4 Diversity Receiver, and WA302 Instrument Cable. Links a bodypack transmitter to a guitar or bass.

    • WA302 Instrument Cable
    • Cable, Instrument, 2.5 foot (.75 m), 4 Pin Mini Connector (TA4F) to 1/4-inch Connector.
    • SLX1 Wireless Bodypack Transmitter
    • Backlit LCD with timeout feature, Frequency and power lockout, and 3-segment battery fuel gauge
    • SLX4 Wireless Receiver
    • SLX Wireless Diversity Receiver with PS20 (120V AC) Power Supply, 1/4 Wave Antennas, and Rack Mounting Hardware

    WA302 Instrument Cable
    Instrument cable connects the T1, UT1, SC1, PG1, PGX1, SLX1, LX1, ULX1, UC1, UR1 and U1 body-pack transmitter to a guitar or other instrument. Features a 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems).

    SLX1 Wireless Bodypack Transmitter
    The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability. Backlit LCD with timeout feature, Frequency and power lockout, and 3-segment battery fuel gauge

    SLX4 Wireless Receiver
    The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

    SLX Wireless Diversity Receiver with PS20 (120V AC) Power Supply, 1/4 Wave Antennas, and Rack Mounting Hardware

  • Receiver 
    Dimensions42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
    Weight816 g (1 lb. 13 oz.)
    HousingGalvanized steel
    Audio Output Level (ref. +/- 38 kHz deviation with 1 kHz tone)xLR connector (into 600 ohm load): -13 dBV 1/4 inch connector (into 3000 ohm load): -2 dBV
    Output ImpedancexLR connector: 200 ohm 1/4 inch connector: 1k ohm xLR output
    Impedance balancedPin 1: Ground Pin 2: (+) Pin 3: (-)
    Sensitivity-105 dBm for 12 dB SINAD, typical
    Image Rejection>70 dB, typical
    Power Requirements12-18 Vdc at 150 mA, supplied by external power supply
    Operating Range Under Typical Conditions100m (300 ft.) Note: Actual range depends on RF signal absorption, reflection, and interference
    Audio Frequency Response (+/- 2 dB)Minimum: 45 Hz Maximum: 15 kHz Note: Overall system frequency depends on microphone element.
    Total Harmonic Distortion (ref. +/- 38 kHz deviation, 1 kHz tone)0.5%, typical
    Dynamic Range>100 dB A-weighted
    Operating Temperature Range -18 degrees C (0 degrees F) to +50 degrees C (+122 degrees F) Note: battery characteristics may limit this range
    Transmitter Audio PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    Bodypack Transmitter 
    Audio Input Level-10 dBV maximum at mic gain position +10 dBV maximum at 0 dB gain position +20 dBV maximum at -10 dB gain position
    Gain Adjustment Range 30dB
    Input Impedance 1 M ohm
    RF Transmitter Output30 mW maximum (dependent on applicable country regulations)
    Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
    Weight 81 grams (3 oz.) without batteries
    Housing Molded ABS case
    Power Requirements 2 AA size alkaline or rechargeable batteries
    Battery Life >8 hours (alkaline)
  • Shipping rates calculator