Shure WCM16 Lightweight Headset Adjustable Microphone

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SHUR-WCM16_

Availability: In Stock

Available for immediate shipment and pick-up from our Jamaica, New York location. In-store pick-up is available Monday through Friday from 8:30 am to 5:30 pm
Free Shipping (Continental US)
  • The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by performers, lecturers, and others who require the highest quality voice pickup with maximum mobility. Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.

    Features Extra lightweight, adjustable headband stays secure and virtually disappears while being worn, Response comparable to finest conventional vocal microphones, Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers, Uniform polar pattern at all frequencies for maximum gain before feedback, High input clipping level eliminates overload distortion, Cable terminates as 4-pin mini connector, Supplied acoustic foam pop screen, Reliable at temperature and humidity extremes

    Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath noise, even without the supplied foam pop screen.

    The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher gain-before-feedback without loss or masking of vocals.

  • Type Condenser (electret bias)
    Frequency Response 50 to 18,000 Hz
    Polar Pattern Hypercardioid, uniform with frequency
    Output Impedance 1200 ohms
    Output Level (close-talked at 1,000 Hz)Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m, 1 Pascal=94 db SPL
    Maximum Sound Pressure Level 150 dB at 1% THD
    Dynamic Range 121 dB
    Output Noise 29 dB equivalent SPL, A-weighted
    Signal-to-Noise Ratio 65 dB at 94 dB SPL
    PolarityMicrophone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector; Receiver-- 1/4 Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4 output connector; Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
    Current Drain 0.35 mA
    Recommended Operating Voltage +5 Vdc (positive on pin 2, negative on pin 1)
    Environmental ConditionsOperating Temperatures: -18 to 60 degrees C (0 to 140 degrees F); Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F); Humidity: 0 to 95%
    Cable1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
    Case Finish (Microphone and Headband),Matte black enamel
    Net Weight36 g (1.27 oz)
  • Shipping rates calculator